Showing 109–123 of 123 results
Solar Tracking Module Automatic Tracker Single Axis Solar Tracking Module Search Light Solar-powered Automatic Tracker Board – Single Directional
Original price was: ₹649.00.₹579.95Current price is: ₹579.95. (Inc. GST)₹491.49 (+18% GST Extra)
Specifications:Â
- Name: Single-axis light source tracking board
- Size: 35*16*1.2mm
- Voltage: 5-5.5VDC
- Current: <1.5A
- Interface: Power + – Motor M
- Principle: Use an obstruction on the photoresistor. When the light strikes the obstruction to form a shadow, and the light on one side forms a difference with the other side, the motor is controlled to find the balance point, that is, the center of the light source.
- Line length: 15CM
SPEDIX ES 25A 2-4S BLHELI_S ESC-ORIGINAL
₹1,239.00 (Inc. GST)₹1,050.00 (+18% GST Extra)
Specifications:
- Continuous Current: 25A
- Voltage Range: 2-4S LiPo
- Weight: 5.9g
- Dimensions: 12.8X25.8X5 mm
- Firmware: BLHeLi_S
Standard 30A ESC Yellow with connectors
₹429.00 (Inc. GST)₹363.56 (+18% GST Extra)
Specification:
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S Li-Po.
- Application: BLDC Motors, Multirotor, Rc Planes etc.
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
₹864.94 (Inc. GST)₹733.00 (+18% GST Extra)
Specifications:
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
₹948.72 (Inc. GST)₹804.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
TB6600 Stepper Motor Drivers 4A 9-42V Micro Step CNC 1 Axis
Original price was: ₹538.50.₹317.42Current price is: ₹317.42. (Inc. GST)₹269.00 (+18% GST Extra)
Specifications:
- DC 9-42V power supply, 12-24V power supply the best
- Control signal input voltage 3.3-24VÂ
- Segmentation accuracy 1-32 subdivision optional
- Output peak current 4.0A
- Input signal high-speed optocoupler isolation
- Built-in temperature protection and over-current protection
- Automatic half-flow to reduce heat
TB6612FNG V1.0.0 WeMos D1 Mini I2C Dual Motor Drive Module
₹689.00 (Inc. GST)₹583.90 (+18% GST Extra)
 Specifications :
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.
- Recommended motor voltage (VMOT): 4.5 V to 13.5 V (can operate down to 2.5 V with derated performance).
- CW/CCW/short break/stop motor control modes
- Logic voltage (VCC): 2.7 V to 5.5 V
- Output current maximum: 3.2 A peak per channel.
- Output current continuous: 1.2 A per channel (can be paralleled to deliver 2 A continuous).
- Maximum PWM frequency: 100 kHz
- Built-in thermal shutdown circuit
- Filtering capacitors on both supply lines.
- Reverse-power protection on the motor supply.
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
₹103.84 (Inc. GST)₹88.00 (+18% GST Extra)
Features:
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors,
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer
- I3 and UM models can also be used, and different machines will have different clipping effects.
TURNIGY Plush 10amp 9gram Speed Controller
₹785.88 (Inc. GST)₹666.00 (+18% GST Extra)
- Cont Current: 10A
- Burst Current: 12A
- BEC Mode: Linear
- BEC : 5v / 2A
- Lipo Cells: 2-4
- NiMH : 5-12
- Weight: 9g
- Size: 27x17x6mm
ULN2003 Driver Module Stepper Motor Driver(SMD)
₹64.90 (Inc. GST)₹55.00 (+18% GST Extra)
Specifications:
- 5-12V power supply
- 4-way signal indicator
- Chip all the pins have Input leads Mounted for easy connection to use
- XH-5P socket can be connected directly 28BYJ-48 Model stepper motor
ULN2003 Stepper Motor Driver
₹44.01 (Inc. GST)₹37.29 (+18% GST Extra)
Specifications:
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
USB 32Ch Servo Motor Controller Board, support PS2 WIFI with USB Cable
₹3,597.82 (Inc. GST)₹3,049.00 (+18% GST Extra)
Specifications:
- Baud rate (USB): 115200
- Baud rate (Bluetooth, UART): 9600
- Storage Flash capacity: 16M
- Mode to choose: 4 types
- Simultaneous controlling servo number: 32 channel
- Max action groups: 256 groups
- Communication agreement: UART
- Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
XY-PWM DC 3.3-30V 1Hz-150kHz Digital Display Pulse PWM Signal Generator with Case
Original price was: ₹465.01.₹462.99Current price is: ₹462.99. (Inc. GST)₹392.37 (+18% GST Extra)
Specifications:
- Operating Voltage: 3.3 – 30VDC
- Frequency Range: 1Hz – 150KHz
- Frequency Accuracy: 2%
- Material: Plastic
- Output Amplitude: Equal to Supply Voltage
ZK-BM1 10A Dual DC Motor Drive Dodule Forward and Reverse PWM Speed Regulation Dimming 3-18v low Voltage High Current
₹855.50 (Inc. GST)₹725.00 (+18% GST Extra)
Specifications:
-
- Work voltage: DC 3.0V-18V
- Signal voltage: DC 3.0V-18V
- Work current:10A for each channel
- Support PWM frequency:0-2KHz
- Duty cycle:0%-100%
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Module Size:49*39*14mm