Displays
A display device is an output device for presentation of information in visual or tactile form. Different sizes of LCDs, Seven Segment Displays, TFTs are used to improve improves GUI.
₹228.00Add to cart
₹228.00
0.91 inch 128*32 Blue OLED Display Module I2C/IIC Serial Interface
0.91 inch 128*32 Blue OLED Display Module I2C/IIC Serial Interface
₹228.00
0.91 inch 128*32 Blue OLED Display Module I2C/IIC Serial Interface
0.91 inch 128*32 Blue OLED Display Module I2C/IIC Serial InterfaceSpecifications:
- OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD, also lower consumption
- Driver IC: SSD1306
- Screen Size: 0.91 Inch
- Resolution: 128 x 32
- IIC Interface
₹296.00Add to cart
₹296.00
0.96″ inch 128×64 OLED Display Module-6 Pin
0.96″ inch 128×64 OLED Display Module-6 Pin
₹296.00
0.96″ inch 128×64 OLED Display Module-6 Pin
0.96″ inch 128×64 OLED Display Module-6 PinSpecifications:-
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Display Color: Area Color (White)
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume ( generous ): 27.0 x 27.0 x 4.1mm
₹500.00Add to cart
₹500.00
0.96″ Inch IPS LCD RGB Display SPI Module 80×160 ST7735S Driver IC
0.96″ Inch IPS LCD RGB Display SPI Module 80×160 ST7735S Driver IC
₹500.00
0.96″ Inch IPS LCD RGB Display SPI Module 80×160 ST7735S Driver IC
0.96″ Inch IPS LCD RGB Display SPI Module 80×160 ST7735S Driver ICSpecifications:
- Display size: 0.96″ inch
- Display Mode Normally black IPS
- Display Format Graphic 80RGB*160 Dot-matrix
- Input Data SPI interface
- Drive IC ST7735S
- Dimensional outline 24(W)*30 (H)*2.8+/-0.1(T)mm
- Resolution 80RGB*160 Dots
- LCD Active area 10.8 (W)*21.7 (H) mm
- Dot pitch 0.135(H) x 0.1356(V) mm
- Viewing Direction All View
- Operating Temperature -20～70°C
₹296.00Add to cart
₹296.00
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
₹296.00
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)Specifications:
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
- Pixel Color: Blue
₹295.76Add to cart
₹295.76
0.96inch 128×64 OLED 4 Pin Display Module Arduino Compatible
0.96inch 128×64 OLED 4 Pin Display Module Arduino Compatible
₹295.76
0.96inch 128×64 OLED 4 Pin Display Module Arduino Compatible
0.96inch 128×64 OLED 4 Pin Display Module Arduino CompatibleSpecifications:
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume: 32 x 35.5 x 4mm
₹30.00Add to cart
₹30.00
1 Wire RGB LED Module
1 Wire RGB LED Module
₹30.00
1 Wire RGB LED Module
1 Wire RGB LED ModuleRGB LED Breakout – WS2812 5050 RGB LED colored lights to single wire interface module full-color light-emitting tube.
₹500.00Add to cart
₹500.00
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2
₹500.00
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2Specifications:
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Pixel Color: Blue
₹550.00Add to cart
₹550.00
1.3 Inch I2C/IIC OLED Display Module 4pin- WHITE
1.3 Inch I2C/IIC OLED Display Module 4pin- WHITE
₹550.00
1.3 Inch I2C/IIC OLED Display Module 4pin- WHITE
1.3 Inch I2C/IIC OLED Display Module 4pin- WHITESpecifications:
- Size: 1.3 inch
- Resolution: 128 x 64 pixels
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
₹500.00Add to cart
₹500.00
1.3″ Inch SPI/I2C 6 Pin OLED Display
1.3″ Inch SPI/I2C 6 Pin OLED Display
₹500.00
1.3″ Inch SPI/I2C 6 Pin OLED Display
1.3″ Inch SPI/I2C 6 Pin OLED DisplaySpecifications:
- OLED Driver IC: SH1106
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Only Need 2 I/O Port to Control
- Fully Compatible with Arduino
- Working temperature: -30°C ~ 70°C
₹500.00Read more
₹500.00
128×64 LCD Blue
128×64 LCD Blue
₹500.00
128×64 LCD Blue
128×64 LCD BlueSpecifications:
- LCD module with blue backlight
- Wide viewing angle and high contrast
- Display construction:128 x 64 DOTS (128×64 = 1024) pixels.
- Easily interfaced with an MCU
- Low-power consumption
- Input Voltage Range: DC 4.5V to 5.5V
- Operation Voltage for LCD: 5V DC
- Interface: 6800 8-bit Parallel
- Display Type: Positive Transflective
- Backlight: LED Blue/ 5.0V
₹500.00Add to cart
₹500.00
128×64 LCD Green/Yellow
128×64 LCD Green/Yellow
₹500.00
128×64 LCD Green/Yellow
128×64 LCD Green/YellowSpecifications:
- A 128×64 LCD means it can display 128 characters per line and there are 64 such lines.
- In this LCD each character is displayed in 5×7 pixel matrix.
- Black text on green background.
- Connection port is 0.1″ pitch.
- Single row for easy breadboarding and wiring.
- Pins are documented on the back of the LCD to assist in wiring it up.
- Single LED backlight included can be dimmed easily with a resistor or PWM and uses much less power than LCD with EL (electroluminescent) backlights.
- Can be fully controlled with only 6 digital lines.
- Built in character set supports most English/European/Japanese text.
- see the HD44780 datasheet for the full character set.
- Up to 8 extra characters can be created for custom glyphs or foreign language support.
₹200.00Add to cart
₹200.00
16×2 LCD(Green) with I2C Module (Soldered)
16×2 LCD(Green) with I2C Module (Soldered)
₹200.00
16×2 LCD(Green) with I2C Module (Soldered)
16×2 LCD(Green) with I2C Module (Soldered)Specifications:
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings.
- 16 characters wide, 2 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Interface: I2C
- Interface Address: 0x27
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V
₹240.00Add to cart
₹240.00
1602 LCD Keyboard Shield
1602 LCD Keyboard Shield
₹240.00
1602 LCD Keyboard Shield
1602 LCD Keyboard ShieldSpecifications:
- PCB size: 82.8mm X 56.6mm X 1.6mm
- Power supply: 5V DC
| Pin | Function |
| A0 | Button(select, up, right, down and left) |
| D4 | DB4 |
| D5 | DB5 |
| D6 | DB6 |
| D7 | DB7 |
| D8 | RS(Data or signal display selection) |
| D9 | LCD1602 Enable |
| D10 | Backlight control |
₹195.00Read more
₹195.00
1602 LCD Keypad Shield Green Backlight
1602 LCD Keypad Shield Green Backlight
₹195.00
1602 LCD Keypad Shield Green Backlight
1602 LCD Keypad Shield Green BacklightSpecifications:
- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character green backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
₹296.00Read more
₹296.00
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
₹296.00
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development BoardSpecifications:
- Outer Diameter: 68 mm.
- Supply Voltage: DC 4-7V.
- LED driver chip: WS2812B
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
₹110.00Add to cart
₹110.00
16×2 LCD Blue Backlight
16×2 LCD Blue Backlight
₹110.00
16×2 LCD Blue Backlight
16×2 LCD Blue BacklightSpecifications:
- Model: LCD1602
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V
- Dimensions: 80 x 36 x 10 (LxWxH) mm
₹110.00Read more
₹110.00
16×2 LCD Green
16×2 LCD Green
₹110.00
16×2 LCD Green
16×2 LCD GreenSpecifications:
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green and Blue Backlight
₹200.00Add to cart
₹200.00
16×2 LCD with I2C Module (Soldered)
16×2 LCD with I2C Module (Soldered)
₹200.00
16×2 LCD with I2C Module (Soldered)
16×2 LCD with I2C Module (Soldered)Specifications:
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings.
- 16 characters wide, 2 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
₹480.00Read more
₹480.00
2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino Shield
₹480.00
2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino ShieldSpecifications:
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
₹289.00Add to cart
₹289.00
2004 LCD Blue Backlight
2004 LCD Blue Backlight
₹289.00
2004 LCD Blue Backlight
2004 LCD Blue BacklightSpecifications:
- 20 Characters x 4 Lines
- Built-in HD44780 Equivalent LCD Controller
- Works directly with ATMEGA, ARDUINO, PIC amd many other microcontroller/kits.
- 4 or 8 bit data I/O interface
- Low power consumption
₹266.95Add to cart
₹266.95
2004 LCD Green/Yellow
2004 LCD Green/Yellow
₹266.95
2004 LCD Green/Yellow
2004 LCD Green/YellowSpecifications:
- 20 Characters x 4 Lines
- Built-in HD44780 Equivalent LCD Controller
- Works directly with ATMEGA, ARDUINO, PIC amd many other microcontroller/kits.
- 4 or 8 bit data I/O interface
- Low power consumption
₹381.00Read more
₹381.00
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
₹381.00
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development BoardSpecifications:
- Outer Diameter: 108 mm.
- Supply Voltage: DC 4-7V.
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
₹1,355.00Read more
₹1,355.00
3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi
3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi
₹1,355.00
3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi
3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry PiSpecifications:
- Version: V4.0
- Resistive touch.
- Dimension: 3.2 inch.
- Operating Voltage: DC 5V.
- Driver: XPT2046.
- Resolution: 240 x 320.
₹1,271.00Add to cart
₹1,271.00
3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino Shield
₹1,271.00
3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino ShieldSpecifications:
- LCD’s type: TFT
- LCD interface: SPI
- Touch screen type: Resistive
- Colours: RGB,65K colours
- Resolution: 480*320 pixels
- Aspect ratio: 8:5
- I/O Voltage: 3.3/5V
₹2,499.00Add to cart
₹2,499.00
7 Inch Monitor Display Screen
7 Inch Monitor Display Screen
₹2,499.00
7 Inch Monitor Display Screen
7 Inch Monitor Display ScreenSpecifications:
- Input Voltage: DC 7.4~35V
- Input Current: DC 0.5A-1.5A
- Power Consumption: ≤8W Watts
- Resolution: 1024 x 600
- Aspect Ratio: 16:9 & 4:3
- Contrast Ratio: 500:1
₹212.00Read more
₹212.00
8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
₹212.00
8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development BoardSpecifications:
- Outer Diameter: 32 mm.
- Supply Voltage: DC 4-7V.
- LED Driver IC: WS2812
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
₹67.00Add to cart
₹67.00
CJMCU-123 WS2811 RGB LED Breakout Module
CJMCU-123 WS2811 RGB LED Breakout Module
₹67.00
CJMCU-123 WS2811 RGB LED Breakout Module
CJMCU-123 WS2811 RGB LED Breakout ModuleSpecifications:
- Supply Voltage: 5V.
- Viewing angle: 120 degrees
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
₹254.00Add to cart
₹254.00
CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module
CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module
₹254.00
CJMCU9813 Full Color LED RGB I2C Communication Drive Control Module
CJMCU9813 Full Color LED RGB I2C Communication Drive Control ModuleSpecifications :
- IC input voltage: 5V-6.5V.
- Built-in LDO: 4.5V regulator output.
- Three-way drive: each drives current 0-45ma.
- Built-in ring oscillator(1.2MHZ) to support ongoing FREE-RUN modulation output.
- Maximum clock frequency: 15MHZ.
₹76.00Add to cart
₹76.00
DIP 3 Color LED Module
DIP 3 Color LED Module
₹76.00
DIP 3 Color LED Module
DIP 3 Color LED ModuleSpecifications:
- The use of plug-in full-color LED.
- RGB trichromatic limiting resistor to prevent burnout.
- Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
- With a variety of single-chip interface.
- The working voltage: 5V.
- LED drive mode: common cathode driver
₹75.00Add to cart
₹75.00
Dot Matrix 5×7 Array 3mm led display Red – Common Anode
Dot Matrix 5×7 Array 3mm led display Red – Common Anode
₹75.00
Dot Matrix 5×7 Array 3mm led display Red – Common Anode
Dot Matrix 5×7 Array 3mm led display Red – Common AnodeSpecifications:
- Easy to Install on Breadboard.
- Bright LED lights.
- Compact Design.
- LED Size: 3mm.
- Configuration: Common Anode
- Color: Red
₹75.00Add to cart
₹75.00
Dot Matrix 5×7 Array 3mm led display Red – Common Cathode
Dot Matrix 5×7 Array 3mm led display Red – Common Cathode ₹75.00
Dot Matrix 5×7 Array 3mm led display Red – Common Cathode
Dot Matrix 5×7 Array 3mm led display Red – Common CathodeSpecifications:
- Easy to Install on Breadboard.
- Bright LED lights.
- Compact Design.
- LED Size: 3mm.
- Configuration: Common Cathode.
- Color: Red
₹75.00Add to cart
₹75.00
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Anode
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Anode
₹75.00
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Anode
Dot Matrix 8×8 Red 64 LED Display 3mm – Common AnodeSpecifications:
- Easy to Install on Breadboard.
- Bright LED lights.
- Compact Design.
- LED Size: 3mm.
- Configuration: Common Anode.
₹75.00Add to cart
₹75.00
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Cathode
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Cathode ₹75.00
Dot Matrix 8×8 Red 64 LED Display 3mm – Common Cathode
Dot Matrix 8×8 Red 64 LED Display 3mm – Common CathodeSpecifications:
- Easy to Install on Breadboard.
- Bright LED lights.
- Compact Design.
- LED Size: 3mm.
- Configuration: Common Cathode.
- Color: Red
₹473.00Add to cart
₹473.00
Dot Matrix MAX 7219 DISPLAY 4 in 1
Dot Matrix MAX 7219 DISPLAY 4 in 1
₹473.00
Dot Matrix MAX 7219 DISPLAY 4 in 1
Dot Matrix MAX 7219 DISPLAY 4 in 1Specifications:
- Dimensions: 128 x 32 x 1.5 cm(L x W x H)(All 4 in 1)
- A single module can drive an 8×8 dot matrix common cathode
- Operating voltage: 5V
- Weight: 55 gm
- Fixing screws with 64 holes with a diameter 3mm
- Module with input and output interfaces
- Support for cascading multiple modules
₹140.00Add to cart
₹140.00
Dot Matrix MAX 7219 Single Module
Dot Matrix MAX 7219 Single Module
₹140.00
Dot Matrix MAX 7219 Single Module
Dot Matrix MAX 7219 Single ModuleSpecifications:
- Dimension 32 x 32 x 1.5 cm (L x W x H) (Single Module)
- Dot Led Matrix Module incorporating MAX7219 Driver chip
- Requires only 3 communication wires of MCU
- Cascading multiple Matrix LED Module is very easy
- Size of the display is very compact
- The PCB features M3 holes for mounting.
₹140.00Add to cart
₹140.00
Dot Matrix MAX7219 Display Module DIY kit
Dot Matrix MAX7219 Display Module DIY kit
₹140.00
Dot Matrix MAX7219 Display Module DIY kit
Dot Matrix MAX7219 Display Module DIY kitSpecifications:
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
₹211.00Add to cart
₹211.00
Full Color LED Module / RGB V2 light water for arduino
Full Color LED Module / RGB V2 light water for arduino
₹211.00
Full Color LED Module / RGB V2 light water for arduino
Full Color LED Module / RGB V2 light water for arduinoSpecifications:
- Good PRINT PACK design, very beautiful.
- 8 world of the three primary colors (red-green-blue) LED color, scanning control mode.
- Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
₹65.00Add to cart
₹65.00
I2C IIC Module for 1602 2004 LCD
I2C IIC Module for 1602 2004 LCD
₹65.00
I2C IIC Module for 1602 2004 LCD
I2C IIC Module for 1602 2004 LCDSpecifications:
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing.
- Size: 41.6 x 19.2 mm.
₹93.00Add to cart
₹93.00
Laser Non-modulator Tub Sensor Receiving Module Laser output High Level
Laser Non-modulator Tub Sensor Receiving Module Laser output High Level
₹93.00
Laser Non-modulator Tub Sensor Receiving Module Laser output High Level
Laser Non-modulator Tub Sensor Receiving Module Laser output High LevelSpecifications:
- Working Voltage: 5V DC
- Operating Temperature: -30ºc ~ 85ºc
- Output high level when received the laser signal
- Output low level when not receive laser signal.
- Application: Electronic Circuits
₹356.00Add to cart
₹356.00
LCD 16X4 Alphanumeric Display With Green Backlight
LCD 16X4 Alphanumeric Display With Green Backlight
₹356.00
LCD 16X4 Alphanumeric Display With Green Backlight
LCD 16X4 Alphanumeric Display With Green BacklightSpecifications:
- 16 Characters x 4 Lines
- 5 x 8 Dots with Cursor
- Built in Controllrer
- +5v Power Supply (Also Available for +3V)
- 1/16 Duty Circle
₹67.00Add to cart
₹67.00
LCD Display 16×2 LCD1602 Holder Acrylic Case Stand Module
LCD Display 16×2 LCD1602 Holder Acrylic Case Stand Module
₹67.00
LCD Display 16×2 LCD1602 Holder Acrylic Case Stand Module
LCD Display 16×2 LCD1602 Holder Acrylic Case Stand ModuleSpecifications:
- Material: Acrylic
- Color: Transparent
- Compatibility: LCD1602
- Weight: 30 gm
₹93.00Add to cart
₹93.00
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
₹93.00
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light ModuleSpecifications:
- PCB Size: 60 x 20 x 13.5 (LxWxH)mm.
- Color: red, yellow, green
- LED Size: 10mm x 7.
- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
₹152.00Read more
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for ArduinoQUICK OVERVIEW
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹152.00Add to cart
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for ArduinoSpecifications:
- Outer Diameter (OD)(mm): 20mm
- Thickness (mm): 0.9
- Weight: 0.095 kg
₹76.00Add to cart
₹76.00
LilyPad Tri-Color LED RGB Module for Arduino
LilyPad Tri-Color LED RGB Module for Arduino
₹76.00
LilyPad Tri-Color LED RGB Module for Arduino
LilyPad Tri-Color LED RGB Module for ArduinoQUICK OVERVIEW
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹76.00Read more
₹76.00
Mini LED Light Ultra-thin Ultra-light Portable USB Small LED Lamp Camping Night Light
Mini LED Light Ultra-thin Ultra-light Portable USB Small LED Lamp Camping Night Light
₹76.00
Mini LED Light Ultra-thin Ultra-light Portable USB Small LED Lamp Camping Night Light
Mini LED Light Ultra-thin Ultra-light Portable USB Small LED Lamp Camping Night LightSpecifications:
- Lamp shape: Patch light
- Lamp cover material: Plastic
- Lampholders Material: Synthetic
- Switch Type: No Switch
- Voltage: 5 V
₹1,381.36Add to cart
₹1,381.36
Nextion BASIC NX3224T024 2.4″ TFT ManMachine Interface HMI kernel LCD Touch Display
Nextion BASIC NX3224T024 2.4″ TFT ManMachine Interface HMI kernel LCD Touch Display
₹1,381.36
Nextion BASIC NX3224T024 2.4″ TFT ManMachine Interface HMI kernel LCD Touch Display
Nextion BASIC NX3224T024 2.4″ TFT ManMachine Interface HMI kernel LCD Touch DisplaySpecifications:
- 320 x 240 Resolution
- Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2
- RGB 65K true to life colors
- TFT Screen with integrated 4-wire Resistive Touch Panel
- Easy 4 pin interface to any TTL Serial Host
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card for firmware upgrade
- Visual Area:36.72mm(L)×48.96mm(W)
- Adjustable Brightness:0~180 nit, the interval of adjustment is 1%
- 5V90mA power consumption
- Generic using for all Arduino or Raspberry Pi project
₹1,635.59Add to cart
₹1,635.59
Nextion BASIC NX3224T028 2.8″HMI LCD Touch Display
Nextion BASIC NX3224T028 2.8″HMI LCD Touch Display
₹1,635.59
Nextion BASIC NX3224T028 2.8″HMI LCD Touch Display
Nextion BASIC NX3224T028 2.8″HMI LCD Touch DisplaySpecifications:
- 320 x 240 Resolution
- RGB 65K true to life colours
- TFT screen with integrated resistive touch panel
- 4 pin TTL serial interface
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card slot for firmware upgradation
- Visual Area: 57.6mm(L)×43.2mm(W)
- Adjustable Brightness: 0~180 nit, the interval of adjustment is 1%
- 5V65mA power consumption
- Compatible with Raspberry Pi A+, B+, Pi 2, Pi 3, Arduino.
- Certificates: CE/EMC, RoHS (certificates)
₹2,075.42Add to cart
₹2,075.42
Nextion BASIC NX4024T032 3.2″ HMI TFT LCD Touch Display Module
Nextion BASIC NX4024T032 3.2″ HMI TFT LCD Touch Display Module ₹2,075.42
Nextion BASIC NX4024T032 3.2″ HMI TFT LCD Touch Display Module
Nextion BASIC NX4024T032 3.2″ HMI TFT LCD Touch Display ModuleSpecifications:
- 400 x 240 Resolution
- RGB 65K true to life colors
- TFT Screen with integrated 4-wire Resistive Touch Panel
- Easy 4 pin interface to any TTL Serial Host
- 4M Flash memory for User Application Code and Data
- Onboard micro-SD card for firmware upgrade
- Visual Area:69.60mm(L)×41.76mm(W)
- Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
- 5V85mA power consumption
- CE/EMC, RoHS certified (certificates)
₹3,880.51Read more
₹3,880.51
Nextion BASIC NX4827T043 – 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display
Nextion BASIC NX4827T043 – 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display ₹3,880.51
Nextion BASIC NX4827T043 – 4.3” TFT LCD ManMachine Interface HMI Kernel Touch Display
Nextion BASIC NX4827T043 – 4.3” TFT LCD ManMachine Interface HMI Kernel Touch DisplaySpecifications:
- Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2.
- 480 x 272 Resolution
- RGB 65K true to life colors
- TFT Screen with integrated 4-wire Resistive Touch Panel
- Easy 4 pin interface to any TTL Serial Host
- 16M Flash memory for User Application Code and Data
- Onboard micro-SD card for firmware upgrade
- Visual Area:95.04mm(L)×53.86mm(W)
- Adjustable Brightness:0~230 nit, the interval of adjustment is 1%
- 5V250mA power consumption
- CE/EMC, RoHS certified (certificates)
