5V Relay Modules
₹78.94 (Inc. GST)₹66.90 (+18% GST Extra)Add to cart
1 channel 5V 10A Relay Control Board Module with Optocoupler
1 channel 5V 10A Relay Control Board Module with Optocoupler1 channel 5V 10A Relay Control Board Module with Optocoupler
1 channel 5V 10A Relay Control Board Module with Optocoupler- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
₹78.94 (Inc. GST)₹66.90 (+18% GST Extra)Add to cart
₹116.82 (Inc. GST)₹99.00 (+18% GST Extra)Add to cart
5V – 2 Channel Relay Module (with Optocoupler)
5V – 2 Channel Relay Module (with Optocoupler)5V – 2 Channel Relay Module (with Optocoupler)
5V – 2 Channel Relay Module (with Optocoupler)Features
- High current relay, AC250V 10A, D 30V 10A
- 2 LEDs to indicate when relays are on
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
₹116.82 (Inc. GST)₹99.00 (+18% GST Extra)Add to cart
₹89.68 (Inc. GST)₹76.00 (+18% GST Extra)Add to cart
5V 1 Channel Relay Module (with Optocoupler)
5V 1 Channel Relay Module (with Optocoupler)5V 1 Channel Relay Module (with Optocoupler)
5V 1 Channel Relay Module (with Optocoupler)Features
- Operating Voltage(VDC) : 5V
- Max. Current(mA) : 0.20 mA
- Current Capacity : 10A
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
₹89.68 (Inc. GST)₹76.00 (+18% GST Extra)Add to cart
₹80.24 (Inc. GST)₹68.00 (+18% GST Extra)Add to cart
5V 1 Channel Relay Module (without Optocoupler)
5V 1 Channel Relay Module (without Optocoupler)5V 1 Channel Relay Module (without Optocoupler)
5V 1 Channel Relay Module (without Optocoupler)₹80.24 (Inc. GST)₹68.00 (+18% GST Extra)Add to cart
₹351.64 (Inc. GST)₹298.00 (+18% GST Extra)Add to cart
5V 1 Channel Relay Module Infrared IR Remote Switch Control
5V 1 Channel Relay Module Infrared IR Remote Switch Control5V 1 Channel Relay Module Infrared IR Remote Switch Control
5V 1 Channel Relay Module Infrared IR Remote Switch ControlSpecifications :
- DC 5V Home lighting system
- Remote control switch
- Smart Home / Home Automation
- Garage Door
- Remote controlled gates
- Security Monitoring
- LED lighting
- Fluorescent lamp
₹351.64 (Inc. GST)₹298.00 (+18% GST Extra)Add to cart
₹219.48 (Inc. GST)₹186.00 (+18% GST Extra)Add to cart
5V 1 Channel Songle Relay Module 30A Power Failure Relay
5V 1 Channel Songle Relay Module 30A Power Failure Relay5V 1 Channel Songle Relay Module 30A Power Failure Relay
5V 1 Channel Songle Relay Module 30A Power Failure RelaySpecifications:
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
₹219.48 (Inc. GST)₹186.00 (+18% GST Extra)Add to cart
₹715.08 (Inc. GST)₹606.00 (+18% GST Extra)Add to cart
5V 16 Channel Relay Module (with Optocoupler)
5V 16 Channel Relay Module (with Optocoupler)5V 16 Channel Relay Module (with Optocoupler)
5V 16 Channel Relay Module (with Optocoupler)Specifications:
- 16-channel relay interface board, each one needs 15 – 25mA driver current
- Equipped with high-current relay, AC 250V 10A / DC 30V 10A
- Standard interface that can be controlled directly by microcontroller
- LED for indicating relay output status
- Compatiable with Arduino, raspberry pi, nodemcu boards.
₹715.08 (Inc. GST)₹606.00 (+18% GST Extra)Add to cart
₹168.74 (Inc. GST)₹143.00 (+18% GST Extra)Add to cart
5V 4 Channel Relay Module (with Optocoupler)
5V 4 Channel Relay Module (with Optocoupler)5V 4 Channel Relay Module (with Optocoupler)
5V 4 Channel Relay Module (with Optocoupler)Features
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when the relay is active – ~70mA (single), ~300mA (all four)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, disconnect is off;
- Input signal, signal, common Terminal and start conducting;
- Useful for appliance control;
- DC or AC signal, control, you can control the 220V AC load;
₹168.74 (Inc. GST)₹143.00 (+18% GST Extra)Add to cart
₹448.40 ₹351.64 (Inc. GST)₹298.00 (+18% GST Extra)Add to cart
5V 8 Channel Relay Module (with Optocoupler)
5V 8 Channel Relay Module (with Optocoupler)5V 8 Channel Relay Module (with Optocoupler)
5V 8 Channel Relay Module (with Optocoupler)Specifications:
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~600mA (all eight)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- 5V 8-Channel Relay interface board
- LOW level trigger, equipped with indicator easy to recognize the working status
- Each relay has NO and NC ports, easier to connect and control the connected devices
- Selection of plastic material for high temperature and better chemical solution performance.
- PCB size: 5.7 x 13.8 cm
- Support control of 10A 30V DC and 10A 250V AC signals
- Compatiable with Arduino, raspberry pi, nodemcu boards.
₹448.40 ₹351.64 (Inc. GST)₹298.00 (+18% GST Extra)Add to cart
₹293.82 (Inc. GST)₹249.00 (+18% GST Extra)Add to cart
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
6-30V 1-Channel Power Relay Module with Adjustable Timing CycleSpecifications:
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
₹293.82 (Inc. GST)₹249.00 (+18% GST Extra)Add to cart
₹499.14 (Inc. GST)₹423.00 (+18% GST Extra)Add to cart
ESP8266 10A DC 7-30V Network Relay WIFI Module
ESP8266 10A DC 7-30V Network Relay WIFI ModuleESP8266 10A DC 7-30V Network Relay WIFI Module
ESP8266 10A DC 7-30V Network Relay WIFI ModuleSpecifications:
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
₹499.14 (Inc. GST)₹423.00 (+18% GST Extra)Add to cart
₹233.64 (Inc. GST)₹198.00 (+18% GST Extra)Add to cart
Flame Sensor Relay Module
Flame Sensor Relay ModuleFlame Sensor Relay Module
Flame Sensor Relay ModuleSpecifications:
- Can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of 80cm, the larger the flame, the greater the distance test
- The detection angle of 60 degrees, the flame spectrum particularly sensitive
- Sensitivity adjustable.
₹233.64 (Inc. GST)₹198.00 (+18% GST Extra)Add to cart
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)Add to cart
Humidity Sensitive Switch Relay Module
Humidity Sensitive Switch Relay ModuleHumidity Sensitive Switch Relay Module
Humidity Sensitive Switch Relay ModuleQUICK OVERVIEW
- Operating voltage:3.3V – 5V
- Operating Current: 150mA
- Maximum voltage: 250V AC
- maximum current: 10A
- High-quality HR202 humidity sensor.
- The comparator output directly drives the relay to connect 220V AC or other equipment.
- With potentiometer to adjust the temperature detection threshold
- Operating Temperature (°C): -40 to 80
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)Add to cart
₹123.90 (Inc. GST)₹105.00 (+18% GST Extra)Add to cart
NE555 delay monostable switch module Time delay switch Delay on vehicle electrical delay 5V
NE555 delay monostable switch module Time delay switch Delay on vehicle electrical delay 5VNE555 delay monostable switch module Time delay switch Delay on vehicle electrical delay 5V
NE555 delay monostable switch module Time delay switch Delay on vehicle electrical delay 5VSpecification:
- Module based on the NE555 chip.
- Input voltage: DC 5V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
₹123.90 (Inc. GST)₹105.00 (+18% GST Extra)Add to cart
₹99.12 (Inc. GST)₹84.00 (+18% GST Extra)Add to cart
PC817 2 CH Optocoupler Isolation Module
PC817 2 CH Optocoupler Isolation ModulePC817 2 CH Optocoupler Isolation Module
PC817 2 CH Optocoupler Isolation ModuleSpecification:
- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
₹99.12 (Inc. GST)₹84.00 (+18% GST Extra)Add to cart
₹269.04 (Inc. GST)₹228.00 (+18% GST Extra)Add to cart
Photosensitive Diode Relay Module
Photosensitive Diode Relay ModulePhotosensitive Diode Relay Module
Photosensitive Diode Relay ModuleSpecifications:
- Operating Voltage Range: 3.3V to 5V
- Maximum Voltage: 250V AC
- Maximum current:10 A
- Supply Current: 150mA
- Operating Temperature (°C): -40 to 80
₹269.04 (Inc. GST)₹228.00 (+18% GST Extra)Add to cart
₹318.60 (Inc. GST)₹270.00 (+18% GST Extra)Add to cart
Photosensitive Resistance Sensor Relay Module
Photosensitive Resistance Sensor Relay ModulePhotosensitive Resistance Sensor Relay Module
Photosensitive Resistance Sensor Relay ModuleSpecifications:
- Adjust the sensitivity with the potentiometer. Set the start relay threshold by adjusting the potentiometer.
- When it is brighter, the module relay pulls in.
- When the threshold is dark, the relay is disconnected.
- Operating Voltage: 3.3V – 5V.
₹318.60 (Inc. GST)₹270.00 (+18% GST Extra)Add to cart
₹298.54 (Inc. GST)₹253.00 (+18% GST Extra)Add to cart
Thermal Sensor Relay Module
Thermal Sensor Relay ModuleThermal Sensor Relay Module
Thermal Sensor Relay ModuleFeatures:
- Supply voltage: 5VDC
- Current: greater than 150mA
- Load: 250V 10A AC or 30V 10A DC
₹298.54 (Inc. GST)₹253.00 (+18% GST Extra)Add to cart
₹298.54 (Inc. GST)₹253.00 (+18% GST Extra)Add to cart
Timing Delay Switch Circuit with Double MOSFET Control
Timing Delay Switch Circuit with Double MOSFET ControlTiming Delay Switch Circuit with Double MOSFET Control
Timing Delay Switch Circuit with Double MOSFET Control₹298.54 (Inc. GST)₹253.00 (+18% GST Extra)Add to cart
₹389.40 (Inc. GST)₹330.00 (+18% GST Extra)Add to cart
USB Control 1 Channel Module 5V Relay Module
USB Control 1 Channel Module 5V Relay ModuleUSB Control 1 Channel Module 5V Relay Module
USB Control 1 Channel Module 5V Relay ModuleFeatures:
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
₹389.40 (Inc. GST)₹330.00 (+18% GST Extra)Add to cart