Flight Controllers
₹211.00Add to cart
₹211.00
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
₹211.00
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawkSpecifications:
- Color: Black
- Material: Glass fiber
- Suit for different open source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight: 24 gm.
₹2,412.00Read more
₹2,412.00
APM 2.8 Flight Controller with Built in Compass
APM 2.8 Flight Controller with Built in Compass
₹2,412.00
APM 2.8 Flight Controller with Built in Compass
APM 2.8 Flight Controller with Built in CompassSpecifications:
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
₹593.00Add to cart
₹593.00
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
₹593.00
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90AFeatures:
- Voltage and current measurement configured for 5V ADC.
- Switching regulator outputs 5.3V and 3A max.
- 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector.
- Supports from 2 cell to 6 cell battery.
₹924.00Read more
₹924.00
CC3D OpenPilot EVO Flight Controller with Side Pins
CC3D OpenPilot EVO Flight Controller with Side Pins
₹924.00
CC3D OpenPilot EVO Flight Controller with Side Pins
CC3D OpenPilot EVO Flight Controller with Side Pins- With a function of being directly plugged into the satellite receiver(It needn’t conversion cable)
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
₹100.00Read more
₹100.00
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller
₹100.00
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controllerSpecifications:
- Color: Black
- Material: Plastic and Rubber
- Weight: 15 gm
- Suit for different open source CC3D flight controller, Naze32, Mini APM or other mini flight control
₹8,906.00Read more
₹8,906.00
DJI NAZA-M Lite V1.1 with GPS Kit
DJI NAZA-M Lite V1.1 with GPS Kit
₹8,906.00
DJI NAZA-M Lite V1.1 with GPS Kit
DJI NAZA-M Lite V1.1 with GPS Kit
₹1,430.00 ₹1,190.00Add to cart
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV FrameF3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV FrameSpecifications:
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
₹1,397.00Read more
₹1,397.00
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
₹1,397.00
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PASpecifications:
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU InvenSense Inc.
- Input voltage: 4.8V-6.0V.
- AVR interface: Standard 6 Pin.
- The signal from receiver: 1520us(5 channels).
- Signal to ESC: 1520us.
₹84.00Read more
₹84.00
M3 Shockproof Sponge Pad-4pcs
M3 Shockproof Sponge Pad-4pcs
₹84.00
M3 Shockproof Sponge Pad-4pcs
M3 Shockproof Sponge Pad-4pcsFeatures:
- Super light.
- Strengthen shockproof.
- Better than the Aluminum column.
- Anti-Static.
- Color: black.
- Self Glued to Stick.
₹1,370.00Read more
₹1,370.00
Naze32 10DOF Flight Control Board
Naze32 10DOF Flight Control Board
₹1,370.00
Naze32 10DOF Flight Control Board
Naze32 10DOF Flight Control BoardOverview:
- Axis: 2000 degrees/second 3-axis MEMS gyro.
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Built-in FrSky telemetry inverter (shared w/main port).
- A modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
- Onboard MicroUSB for setup and configuration.
- Multi WiFi-based configuration software for easy setup.
₹1,050.00Read more
₹1,050.00
Naze32 6DOF Flight Control board
Naze32 6DOF Flight Control board
₹1,050.00
Naze32 6DOF Flight Control board
Naze32 6DOF Flight Control boardSpecifications:
- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
₹338.00Read more
₹338.00
PDB-XT60 with BEC 5V and 12V
PDB-XT60 with BEC 5V and 12V
₹338.00
PDB-XT60 with BEC 5V and 12V
PDB-XT60 with BEC 5V and 12VFeatures :
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- 5V and 12V Output LED indicators
- Regulated 5V and 12V outputs
- BEC 5V output: 5V/2A (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn= 16V, VOut= 5V@2A load)
- Short-circuit tolerant: 5 seconds/minute
- BEC 12V output (4S LiPoly, 13~18V DC): 12V/500mA (Max.0.8A 5s/minute)
- BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
₹168.00Read more
₹168.00
Pixhawk I2C Port Expand Board with Cable
Pixhawk I2C Port Expand Board with Cable
₹168.00
Pixhawk I2C Port Expand Board with Cable
Pixhawk I2C Port Expand Board with CableSpecifications:
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 5g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
₹525.00Read more
₹525.00
Pixhawk Passive Buzzer and Switch
Pixhawk Passive Buzzer and Switch
₹525.00
Pixhawk Passive Buzzer and Switch
Pixhawk Passive Buzzer and SwitchFeatures:
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Adopts E-Switch red light switch.
- Length: 250mm .
- Switch mounting hole diameter 8mm.
- The same version with 3DR official version.
₹1,255.00Read more
₹1,255.00
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
₹1,255.00
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8Features :
- Locate performance
- These are Pre-configured, flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 6 pin connectors for EZ connect to MEGA BLACK
- 4 pin connectors for only GPS use
- 4 pin connectors for compass only use
- Can use both 4 pin at once.
₹221.00Read more
₹221.00
Universal GPS Folding Antenna Base Set
Universal GPS Folding Antenna Base Set
₹221.00
Universal GPS Folding Antenna Base Set
Universal GPS Folding Antenna Base SetFeatures:
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter: 4mm
- Lead of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
- Colour: Anodised black
