Controller
ATmega 16A-PU PDIP-40 Microcontroller
ATmega 16A-PU PDIP-40 MicrocontrollerATmega 16A-PU PDIP-40 Microcontroller
ATmega 16A-PU PDIP-40 MicrocontrollerFeatures :
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- Advanced RISC Architecture.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 16 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- JTAG (IEEE std. 1149.1 Compliant) Interface.
- Boundary-scan Capabilities According to the JTAG Standard.
- Extensive On-chip Debug Support.
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
- Peripheral Features.
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
- Real Time Counter with Separate Oscillator.
- Four PWM Channels.
- 8-channel, 10-bit ADC.
- 8 Single-ended Channels.
- 7 Differential Channels in TQFP Package Only.
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
ATmega 32A-AU (SMD Package) TQFP-44 PIN Microcontroller
ATmega 32A-AU (SMD Package) TQFP-44 PIN MicrocontrollerATmega 32A-AU (SMD Package) TQFP-44 PIN Microcontroller
ATmega 32A-AU (SMD Package) TQFP-44 PIN Microcontroller- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
Atmega328 U IC Micro-controller
Atmega328 U IC Micro-controllerAtmega328 U IC Micro-controller
Atmega328 U IC Micro-controllerSpecifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATmega328P AU TQFP-32 Microcontroller
ATmega328P AU TQFP-32 MicrocontrollerATmega328P AU TQFP-32 Microcontroller
ATmega328P AU TQFP-32 MicrocontrollerSpecifications:
- High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
- Advanced RISC Architectur
- High Endurance Non-volatile Memory Segments
- Atmel® QTouch® library support
- Peripheral Features
- Special Microcontroller Features
ATmega328P U-TH Microcontroller
ATmega328P U-TH MicrocontrollerATmega328P U-TH Microcontroller
ATmega328P U-TH MicrocontrollerFeatures:
- High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
- Advanced RISC Architecture
- High Endurance Non-volatile Memory Segments
- Atmel® QTouch® library support
- Peripheral Features
- Special Microcontroller Features
Atmega328P-U IC Micro-controller
Atmega328P-U IC Micro-controllerAtmega328P-U IC Micro-controller
Atmega328P-U IC Micro-controllerSpecifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMega32A Microcontroller IC
ATMega32A Microcontroller ICATMega32A Microcontroller IC
ATMega32A Microcontroller IC- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
ATmega8A AU TQFP-32 Microcontroller
ATmega8A AU TQFP-32 MicrocontrollerATmega8A AU TQFP-32 Microcontroller
ATmega8A AU TQFP-32 MicrocontrollerFeatures:
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders, and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down, and standby
ATmega8A U PDIP-28 Microcontroller
ATmega8A U PDIP-28 MicrocontrollerATmega8A U PDIP-28 Microcontroller
ATmega8A U PDIP-28 MicrocontrollerSpecifications:
- Advanced RISC Architecture.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Programming Lock for Software Security.
- Programmable Serial USART.
- Applications of ATmega8 Microcontroller:
- Useful for Multiple DIY projects.
Atmel ATMEGA32U4-AUR SMD IC
Atmel ATMEGA32U4-AUR SMD ICAtmel ATMEGA32U4-AUR SMD IC
Atmel ATMEGA32U4-AUR SMD ICThe ATmega32U4 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega32U4 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
ATtiny85 IC
ATtiny85 ICATtiny85 IC
ATtiny85 ICFeatures:
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
ATtiny85 20SU 8-bit Micro controller
ATtiny85 20SU 8-bit Micro controllerATtiny85 20SU 8-bit Micro controller
ATtiny85 20SU 8-bit Micro controller- ATtiny85
- AVR
- 8 bit
- 20 MHz
- 8 kB
- 512 B
- 10 bit
- 6 I/O
- 2.7 V to 5.5 V
IC AT89C51
IC AT89C51IC AT89C51
IC AT89C51Features:
- The 89c51 is compatible with MCS 51 family.
- It has 8 bit data bus and 8 bit (arithmetic logic unit).
- It has 4k bytes of on chip reprogrammable flash memory.
- It supported three level program memory lock.
- It has 16 bit of address bus and 64 kb of RAM (random access memory) and ROM (read only memory).
- It has on chip RAM 128 bytes data memory.
- It has four 8 bit bidirectional input or output ports that is 32 programmable input or output lines.
- It can execute 1 million one cycle instructions per second with a clock frequency of 12MHz.
- It has one UART programmable serial ports.
- It has six interrupts source.
- It has two multimode 16 bit timers.
- It has two level interrupts priority.
- It has power saving mode.
IC ATMEGA 8A-PU
IC ATMEGA 8A-PUIC ATMEGA 8A-PU
IC ATMEGA 8A-PU- Operating Voltage: 4.5V to 5V.
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 8 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Data retention: 20 years at 85°C/100 years at 25°C(1).
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- Extensive On-chip Debug Support.
- 8 Single-ended Channels.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
- Minimal circuit required for a complete functional project.
- Applications of ATmega8 Microcontroller:
- Multiple DIY projects.
- Projects requiring more than logical control for devices.
- Micro-controller applications for multiple device interface/Control.
N76E003AT20 IC-2Pcs
N76E003AT20 IC-2PcsN76E003AT20 IC-2Pcs
N76E003AT20 IC-2PcsOverview:
The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
PIC 18F4550 IC
PIC 18F4550 ICPIC 18F4550 IC
PIC 18F4550 ICFeatures:
PIC18F4550 – Simplified Features | |
CPU | 8-bit |
Total Number of Pins | 40 |
Operating Voltage | +4.0 to +5.5 V (+5.5V being absolute maximum) |
Number of programmable I/O pins | 35 |
Communication Interface | USB Serial Interface (23,24 PINS) [Can be used for programming this controller] Master/Slave SPI Serial Interface(7,26,33, 34 PINS) [Can be used for programming this controller] Programmable Serial UART(25,26 PINS) [Can be used for programming this controller] Two-wire Serial Interface(33, 34 PINS)[Can be used to connect peripheral devices like sensors and LCDs] |
ADC Module | 13channels, 10-bit resolution ADC |
Timer Module | One 8-bit counter, Three 16-bit counter |
Analog Comparators | 2 |
PWM channels | 4 |
External Oscillator | Up to 48MHz |
Internal Oscillator | 32KHz-8MHz Calibrated Internal Oscillator |
Program Memory Type | Flash |
Program Memory | 32Kbytes[10000 write/erase cycles] |
CPU Speed | 12 MIPS |
RAM Bytes | 2KBytes |
EEPROM | 256Bytes |
Watchdog Timer | Programmable Watchdog Timer with Separate On-chip Oscillator |
Power Save Modes | Available |
Operating Temperature | -40°C to +85°C(+85 being absolute maximum, -40 being absolute minimum) |
STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCU
STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCUSTM32F030F4P6 TSSOP-20 ARM Microcontroller-MCU
STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCUFeatures:
- CRC calculation unit
- 4 to the 32MHz Crystal oscillator
- 32kHz Oscillator for RTC with calibration
- Internal 8MHz RC with x6 PLL option
- Internal 40kHz RC oscillator
- 0 to 3.6V Conversion range
- 2.4 to 3.6V Separate analog supply
- Independent and system watchdog timers
- SysTick timer
- Communication interfaces
- Serial wire debug (SWD)
STM32F103C8T6 LQFP-48 ARM Microcontroller-MCU
STM32F103C8T6 LQFP-48 ARM Microcontroller-MCUSTM32F103C8T6 LQFP-48 ARM Microcontroller-MCU
STM32F103C8T6 LQFP-48 ARM Microcontroller-MCUFeatures:
- Operating voltage range from 2V to 3.6V
- 64Kbytes of flash memory
- 20Kbytes of SRAM
- CRC calculation unit, 96bit unique ID
- Two 12bit, 1µs A/D converter (up to 10 channels)
- 7 channel DMA controller, 3 general purpose timer and 1 advanced control timer
- 37 fast I/O ports
- Serial wire debug (SWD) and JTAG interfaces
- Two SPI, two I2C, three USART, one USB and one CAN interfaces
- Ambient operating temperature range from -40°C to 85°C
W78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – Nuvoton
W78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – NuvotonW78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – Nuvoton
W78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – NuvotonSpecifications:
- 6T/12T 8051 processor
- Max frequency of 40 MHz
- Operating voltage: 2.4V to 5.5V
- Temperature range: -40℃ ~ 85℃
- 8 KB of flash memory
- 256B of SRAM
- ISP (In-System Programming)