Stepper Motor Drivers
₹798.86 (Inc. GST)₹677.00 (+18% GST Extra)Add to cart
₹798.86 (Inc. GST)₹677.00 (+18% GST Extra)
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
₹798.86 (Inc. GST)₹677.00 (+18% GST Extra)
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing ModuleFeatures:
This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which used as a signal for stepper drivers. To control the stepper motor.
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)Add to cart
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
5V 4-Phase Stepper Motor +ULN2003 Driver Board
5V 4-Phase Stepper Motor +ULN2003 Driver Board
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
5V 4-Phase Stepper Motor +ULN2003 Driver Board
5V 4-Phase Stepper Motor +ULN2003 Driver BoardSpecifications :
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
₹306.80 (Inc. GST)₹260.00 (+18% GST Extra)Add to cart
₹306.80 (Inc. GST)₹260.00 (+18% GST Extra)
A3967 Stepper Motor Driver For Arduino
A3967 Stepper Motor Driver For Arduino
₹306.80 (Inc. GST)₹260.00 (+18% GST Extra)
A3967 Stepper Motor Driver For Arduino
A3967 Stepper Motor Driver For ArduinoSpecifications:
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)Add to cart
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)
A4988 Stepper Motor Driver- Good Quality
A4988 Stepper Motor Driver- Good Quality
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)
A4988 Stepper Motor Driver- Good Quality
A4988 Stepper Motor Driver- Good QualitySpecifications:
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)Add to cart
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs
Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5PcsFeatures:
- Material: Aluminum
- Color: white
- Teeth Number: 5 Teeth
- Dimensions: 9 x 9 x 5 (LxWxH) mm
- They have good thermal conductivity.
- Very lightweight.
₹5,900.00 (Inc. GST)₹5,000.00 (+18% GST Extra)Read more
Out of stock
₹5,900.00 (Inc. GST)₹5,000.00 (+18% GST Extra)
CNC 4 Axis Controller DSP Controlled – TB6560 Stepper Motor
CNC 4 Axis Controller DSP Controlled – TB6560 Stepper Motor
₹5,900.00 (Inc. GST)₹5,000.00 (+18% GST Extra)
CNC 4 Axis Controller DSP Controlled – TB6560 Stepper Motor
CNC 4 Axis Controller DSP Controlled – TB6560 Stepper MotorFeatures:
- High performance, cost-effective.
- Automatic idle-current reduction.
- Supply voltage up to 45V DC.
- Output current up to 5.0A.
- Suitable for 2-phase and 4-phase motors.
- High speed optoelectronic isolation signal input.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- 1, 2, 4, 8, 16 adjustable microstep control, motors run more precisely and smoothly.
- Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- With one 0 ~ 10V PWM Signal output port for speed adjustment and one Relay output port.
- 5 types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc..
₹2,998.38 (Inc. GST)₹2,541.00 (+18% GST Extra)Add to cart
₹2,998.38 (Inc. GST)₹2,541.00 (+18% GST Extra)
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
₹2,998.38 (Inc. GST)₹2,541.00 (+18% GST Extra)
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer AccessoriesFeatures:
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology
₹1,418.36 (Inc. GST)₹1,202.00 (+18% GST Extra)Read more
Out of stock
₹1,418.36 (Inc. GST)₹1,202.00 (+18% GST Extra)
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
₹1,418.36 (Inc. GST)₹1,202.00 (+18% GST Extra)
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer AccessoriesSpecifications:
- Maximum current: 7.2A, resolution: 0.1A
- Subdivision range: 400~25600ppr
- Impulse response frequency: 200KHz
- DC power supply
- The input voltage range: 24~80VDC or AC both OK;
- Power supply is greater than 200W. Recommend 48VDC or 48V AC
- Operating Temperature: -10~45
₹3,894.00 (Inc. GST)₹3,300.00 (+18% GST Extra)Add to cart
₹3,894.00 (Inc. GST)₹3,300.00 (+18% GST Extra)
DM556 Digital Stepper Motor Driver with micro stepping 20 to 50V 5.6A
DM556 Digital Stepper Motor Driver with micro stepping 20 to 50V 5.6A
₹3,894.00 (Inc. GST)₹3,300.00 (+18% GST Extra)
DM556 Digital Stepper Motor Driver with micro stepping 20 to 50V 5.6A
DM556 Digital Stepper Motor Driver with micro stepping 20 to 50V 5.6AFeatures:
- Extra-low motor noise offers excellent quietness
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Self-test and Auto-configuration technology, offers optimum responses with different motors
- Microstep resolutions programmable, from full-step to 102,400 steps/rev
- Supply voltage up to +50 VDC
- Output current programmable, from 0.5A to 5.6A
- Pulse input frequency up to 200 KHz
- Automatic idle-current reduction
- Supports PUL/DIR and CW/CCW modes
₹6,667.00 (Inc. GST)₹5,650.00 (+18% GST Extra)Read more
Out of stock
₹6,667.00 (Inc. GST)₹5,650.00 (+18% GST Extra)
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2A
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2A
₹6,667.00 (Inc. GST)₹5,650.00 (+18% GST Extra)
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2A
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2AFeatures:
- Leadshine original D860H | MA860H microstepping drive.
- Input voltage :Up to +80VAC or +110VDC.
- Output current Up to 7.2A.
- Pulse input frequency up to 300 KHz.
- Automatic idle-current reduction.
- Over-voltage, over-current protection.
- Suitable for 2-phase and 4-phase motors.
- Support PUL/DIR and CW/CCW modes.
- Operating Temperature : 70 C.
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)Add to cart
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module ₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver ModuleSpecifications:
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
₹293.82 (Inc. GST)₹249.00 (+18% GST Extra)Add to cart
₹293.82 (Inc. GST)₹249.00 (+18% GST Extra)
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
₹293.82 (Inc. GST)₹249.00 (+18% GST Extra)
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
DRV8825 Stepper Motor Driver with Aluminum Heat SinkSpecifications:
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
₹99.00 (Inc. GST)₹83.90 (+18% GST Extra)Add to cart
₹99.00 (Inc. GST)₹83.90 (+18% GST Extra)
DRV8833 2 Channel DC Motor Driver
DRV8833 2 Channel DC Motor Driver
₹99.00 (Inc. GST)₹83.90 (+18% GST Extra)
DRV8833 2 Channel DC Motor Driver
DRV8833 2 Channel DC Motor Driver- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
- Operating voltage: 2.7 V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor
- Inputs are 3V- and 5V-compatible
₹69.62 (Inc. GST)₹59.00 (+18% GST Extra)Add to cart
₹69.62 (Inc. GST)₹59.00 (+18% GST Extra)
IC L293D
IC L293D
₹69.62 (Inc. GST)₹59.00 (+18% GST Extra)
IC L293D
IC L293DFeatures
- Supply Voltage Range 4.5V to 36V
- 600-mA Output current capability per driver
- Separate Input-logic supply
- It can drive small DC-geared motors, bipolar stepper motor.
- Pulsed Current 1.2-A Per Driver
- Thermal Shutdown
- Internal ESD Protection
- High-Noise-Immunity Inputs
₹12,390.00 (Inc. GST)₹10,500.00 (+18% GST Extra)Add to cart
₹12,390.00 (Inc. GST)₹10,500.00 (+18% GST Extra)
JK2M2283 2 Phase 150V-220V AC 8A 110mm 130mm NEMA42/52 Motor StepperEngine Driver
JK2M2283 2 Phase 150V-220V AC 8A 110mm 130mm NEMA42/52 Motor StepperEngine Driver
₹12,390.00 (Inc. GST)₹10,500.00 (+18% GST Extra)
JK2M2283 2 Phase 150V-220V AC 8A 110mm 130mm NEMA42/52 Motor StepperEngine Driver
JK2M2283 2 Phase 150V-220V AC 8A 110mm 130mm NEMA42/52 Motor StepperEngine DriverSpecifications:
- Current: 2.0A – 8.3A
- Voltage: 150VAC – 220VAC
- Matched Models: Nema42-52 Stepping Motor
- Industrial Grade
₹5,310.00 (Inc. GST)₹4,500.00 (+18% GST Extra)Add to cart
₹5,310.00 (Inc. GST)₹4,500.00 (+18% GST Extra)
JKD2060H Stepper Motor Driver
JKD2060H Stepper Motor Driver
₹5,310.00 (Inc. GST)₹4,500.00 (+18% GST Extra)
JKD2060H Stepper Motor Driver
JKD2060H Stepper Motor DriverFeatures：
1、 High-performance, low price
2、 micro-step
3、 Automatic idle-current reduction
4、Optical isolating signals I/O
5、 Max response frequency up to 200Kpps
6、 Low temperature rise, smooth motion
7、Online adaptive PID technology
₹2,950.00 (Inc. GST)₹2,500.00 (+18% GST Extra)Add to cart
₹2,950.00 (Inc. GST)₹2,500.00 (+18% GST Extra)
JKD5056S Stepper Motor Driver
JKD5056S Stepper Motor Driver
₹2,950.00 (Inc. GST)₹2,500.00 (+18% GST Extra)
JKD5056S Stepper Motor Driver
JKD5056S Stepper Motor DriverSpecifications:
- Support Motor: Nema 23 Stepper Motor / Nema 24 Stepper Motor / Nema 34 Stepper Motor
- Current Output: 5A
- Input Power Supply: 24V – 50V
₹92.04 (Inc. GST)₹78.00 (+18% GST Extra)Add to cart
₹92.04 (Inc. GST)₹78.00 (+18% GST Extra)
L9110 L9110S DC Stepper Motor Driver Board HBridge
L9110 L9110S DC Stepper Motor Driver Board HBridge
₹92.04 (Inc. GST)₹78.00 (+18% GST Extra)
L9110 L9110S DC Stepper Motor Driver Board HBridge
L9110 L9110S DC Stepper Motor Driver Board HBridgeSpecifications:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
₹90.86 (Inc. GST)₹77.00 (+18% GST Extra)Add to cart
₹90.86 (Inc. GST)₹77.00 (+18% GST Extra)
L9110S DC Stepper Motor Driver Board
L9110S DC Stepper Motor Driver Board
₹90.86 (Inc. GST)₹77.00 (+18% GST Extra)
L9110S DC Stepper Motor Driver Board
L9110S DC Stepper Motor Driver BoardFeatures:
- L9110S-chip motor drive
- Supply voltage: 2.5-12V
- The maximum operating current of 0.8A
- Drive two DC motors or a 4-wire 2-phase stepping motor.
- Ultra-small size, suitable for assembly
₹689.12 (Inc. GST)₹584.00 (+18% GST Extra)Add to cart
₹689.12 (Inc. GST)₹584.00 (+18% GST Extra)
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
₹689.12 (Inc. GST)₹584.00 (+18% GST Extra)
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cable
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver and USB cableSpecifications:
- Input Power: Through PC USB port or 12-24V power supply
- Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
- Driver type: Pulse and Direction signal control
- Weight (gm): 78
- Dimensions (mm) LxWxH: 90 x 70 x 20
- Cable Length: 1.4 meter
