Arduino Shields
₹283.20 (Inc. GST)₹240.00 (+18% GST Extra)Add to cart
1602 LCD Keyboard Arduino Shield
1602 LCD Keyboard Arduino Shield1602 LCD Keyboard Arduino Shield
1602 LCD Keyboard Arduino ShieldSpecifications:
- PCB size: 82.8mm X 56.6mm X 1.6mm
- Power supply: 5V DC
Pin | Function |
A0 | Button(select, up, right, down and left) |
D4 | DB4 |
D5 | DB5 |
D6 | DB6 |
D7 | DB7 |
D8 | RS(Data or signal display selection) |
D9 | LCD1602 Enable |
D10 | Backlight control |
₹283.20 (Inc. GST)₹240.00 (+18% GST Extra)Add to cart
₹566.40 (Inc. GST)₹480.00 (+18% GST Extra)Read more
Out of stock
2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino Shield2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino ShieldSpecifications:
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8-bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlights. By default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
₹566.40 (Inc. GST)₹480.00 (+18% GST Extra)Read more
₹1,499.78 (Inc. GST)₹1,271.00 (+18% GST Extra)Read more
Out of stock
3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino Shield3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino ShieldSpecifications:
- LCD’s type: TFT
- LCD interface: SPI
- Touch screen type: Resistive
- Colours: RGB,65K colours
- Resolution: 480*320 pixels
- Aspect ratio: 8:5
- I/O Voltage: 3.3/5V
₹1,499.78 (Inc. GST)₹1,271.00 (+18% GST Extra)Read more
₹383.50 (Inc. GST)₹325.00 (+18% GST Extra)Add to cart
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay ShieldSpecifications :
- Coil Voltage : 5.0 volts
- Connector Type : Screw
- Contact Type : Normally Open , Normally Closed
- Operating Voltage : 5.0 volts
₹383.50 (Inc. GST)₹325.00 (+18% GST Extra)Add to cart
₹108.56 (Inc. GST)₹92.00 (+18% GST Extra)Add to cart
Arduino Sensor Shield V5 Expansion Board
Arduino Sensor Shield V5 Expansion BoardArduino Sensor Shield V5 Expansion Board
Arduino Sensor Shield V5 Expansion BoardQuick Overview:
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
- Compatiable With Arduino Uno
₹108.56 (Inc. GST)₹92.00 (+18% GST Extra)Add to cart
₹190.00 (Inc. GST)₹161.02 (+18% GST Extra)Add to cart
CNC Shield V3 Arduino Uno Mega Compatible
CNC Shield V3 Arduino Uno Mega CompatibleCNC Shield V3 Arduino Uno Mega Compatible
CNC Shield V3 Arduino Uno Mega CompatibleFeatures
- Interfaces with Arduino Uno.
- 4 stepper motor driver outputs, 3 Axis + 1 Slave.
- Compatible with Pololu A4988 and DRV8825 stepper drivers and others.
- 6 Limit switch inputs.
- I2C and UART outputs.
- Additional connections available for Spindle Control, Stop/Start & Emergency Buttons.
- Fully tested after assembly.
₹190.00 (Inc. GST)₹161.02 (+18% GST Extra)Add to cart
₹236.00 (Inc. GST)₹200.00 (+18% GST Extra)Add to cart
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
CNC Shield V4.0 3-Axis Stepper Motor Drive BoardCNC Shield V4.0 3-Axis Stepper Motor Drive Board
CNC Shield V4.0 3-Axis Stepper Motor Drive BoardFeatures :
- 3 Axis stepper motor driver.
- Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
- Worked with Arduino nano.
₹236.00 (Inc. GST)₹200.00 (+18% GST Extra)Add to cart
₹988.84 (Inc. GST)₹838.00 (+18% GST Extra)Read more
Out of stock
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with ArduinoCNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with ArduinoFeatures :
1 axis stepper motor driver
2.Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
3.2A can be controlled within the two-phase four-wire stepper motor.
4.Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
5.Released the I2C interface, you can connect to the LCD I2C or other I2C module.
6.power DC5v interface, 7.5-12V voltage input.
7.GRBL compatible
8.worked with arduino nano.
₹988.84 (Inc. GST)₹838.00 (+18% GST Extra)Read more
₹1,348.74 (Inc. GST)₹1,143.00 (+18% GST Extra)Add to cart
Cytron Arduino PS2 Shield
Cytron Arduino PS2 ShieldCytron Arduino PS2 Shield
Cytron Arduino PS2 ShieldSpecifications:
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
₹1,348.74 (Inc. GST)₹1,143.00 (+18% GST Extra)Add to cart
₹290.28 (Inc. GST)₹246.00 (+18% GST Extra)Add to cart
Data Logger module Logging Shield data Recorder Shield
Data Logger module Logging Shield data Recorder ShieldData Logger module Logging Shield data Recorder Shield
Data Logger module Logging Shield data Recorder ShieldSpecifications:
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- A real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
₹290.28 (Inc. GST)₹246.00 (+18% GST Extra)Add to cart
₹138.06 (Inc. GST)₹117.00 (+18% GST Extra)Add to cart
DIY Nano IO Shield V1.0
DIY Nano IO Shield V1.0DIY Nano IO Shield V1.0
DIY Nano IO Shield V1.0- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size;
- Leads all pins out, convenient for wiring, and doing experiments.
₹138.06 (Inc. GST)₹117.00 (+18% GST Extra)Add to cart
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)Add to cart
Esp13 Wifi Shield Arduino Webserver Shield Module
Esp13 Wifi Shield Arduino Webserver Shield ModuleEsp13 Wifi Shield Arduino Webserver Shield Module
Esp13 Wifi Shield Arduino Webserver Shield ModuleFeatures :
- Supports STA and AP modes
- Baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps
- Serial data bit support: 5/6/7/8 bits
- 802.11b/g/n support
- Serial WiFi transmission speed: 110-460800bps
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)Add to cart
₹1,298.00 (Inc. GST)₹1,100.00 (+18% GST Extra)Add to cart
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for ArduinoEthernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for ArduinoSpecifications:
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
₹1,298.00 (Inc. GST)₹1,100.00 (+18% GST Extra)Add to cart
₹179.36 (Inc. GST)₹152.00 (+18% GST Extra)Add to cart
L293D Motor Driver/Servo Shield for Arduino
L293D Motor Driver/Servo Shield for ArduinoL293D Motor Driver/Servo Shield for Arduino
L293D Motor Driver/Servo Shield for ArduinoSpecifications:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
₹179.36 (Inc. GST)₹152.00 (+18% GST Extra)Add to cart
₹129.00 (Inc. GST)₹109.32 (+18% GST Extra)Add to cart
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560Specifications:
- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
₹129.00 (Inc. GST)₹109.32 (+18% GST Extra)Add to cart
₹1,631.94 (Inc. GST)₹1,383.00 (+18% GST Extra)Add to cart
MINI USB Host Shield 2.0 ADK
MINI USB Host Shield 2.0 ADKMINI USB Host Shield 2.0 ADK
MINI USB Host Shield 2.0 ADKSpecifications:
- Supports:
3.3V / 8M / 328 Promini and 3.3V FTDI
USB Host Function
USB HUB Function
₹1,631.94 (Inc. GST)₹1,383.00 (+18% GST Extra)Add to cart
₹265.50 (Inc. GST)₹225.00 (+18% GST Extra)Add to cart
Multifunction Shield For Arduino Uno / Leonardo
Multifunction Shield For Arduino Uno / LeonardoMultifunction Shield For Arduino Uno / Leonardo
Multifunction Shield For Arduino Uno / LeonardoSpecifications :
- 4 digit 7-segment LED display module driven by two serial 74HC595s.
- 4 x surface mount LEDs in a parallel configuration.
- 10K adjustable precision potentiometer.
- 3 x Independent push buttons.
- Piezo buzzer.
- DS18B20 temperature sensor interface.
- LM35 temperature sensor interface.
- Infrared receiver interface.
- Serial interface header for convenient connection to serial modules such as Bluetooth, a wireless interface, voice module, a voice recognition module, etc.
₹265.50 (Inc. GST)₹225.00 (+18% GST Extra)Add to cart
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)Add to cart
Nano 328P Expansion Adapter Breakout Board IO Shield
Nano 328P Expansion Adapter Breakout Board IO ShieldNano 328P Expansion Adapter Breakout Board IO Shield
Nano 328P Expansion Adapter Breakout Board IO ShieldSpecifiacations
- 14 I/O Pin (servo type with GND, power, and signal).
- 8 analog Pin with power output and GND.
- 6 PWM Pin.
- 1 Servo power input.
- 5 I2C expansion Pin.
- 1 AREF output.
- 1 3.3V output.
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)Add to cart
₹248.98 (Inc. GST)₹211.00 (+18% GST Extra)Add to cart
NANO IO Shield Expansion Board For Arduino Screw Terminals
NANO IO Shield Expansion Board For Arduino Screw TerminalsNANO IO Shield Expansion Board For Arduino Screw Terminals
NANO IO Shield Expansion Board For Arduino Screw TerminalsSpecifications:
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
₹248.98 (Inc. GST)₹211.00 (+18% GST Extra)Add to cart
₹398.84 (Inc. GST)₹338.00 (+18% GST Extra)Add to cart
Presall 3D Scanner Board Kit Ciclop Expansion Board
Presall 3D Scanner Board Kit Ciclop Expansion BoardPresall 3D Scanner Board Kit Ciclop Expansion Board
Presall 3D Scanner Board Kit Ciclop Expansion BoardSpecifications:
- Supply Voltage: 12VDC.
- No. of motor drivers mounts: 2.
- Onboard Reset button.
- Thermal shutdown circuitry.
- Ground fault protection.
- Load short-circuit protection.
₹398.84 (Inc. GST)₹338.00 (+18% GST Extra)Add to cart
₹358.72 (Inc. GST)₹304.00 (+18% GST Extra)Add to cart
Proto Screw Shield 1.0 For Arduino Uno
Proto Screw Shield 1.0 For Arduino UnoProto Screw Shield 1.0 For Arduino Uno
Proto Screw Shield 1.0 For Arduino UnoSpecifications:
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
₹358.72 (Inc. GST)₹304.00 (+18% GST Extra)Add to cart
₹310.34 (Inc. GST)₹263.00 (+18% GST Extra)Read more
Out of stock
Prototype Shield V3.0 For Arduino Mega with breadboard
Prototype Shield V3.0 For Arduino Mega with breadboardPrototype Shield V3.0 For Arduino Mega with breadboard
Prototype Shield V3.0 For Arduino Mega with breadboardQuick Overview:
- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
₹310.34 (Inc. GST)₹263.00 (+18% GST Extra)Read more
₹587.64 (Inc. GST)₹498.00 (+18% GST Extra)Add to cart
Ramps 1.4 Board 3D Printer Control Panel Mega Shield
Ramps 1.4 Board 3D Printer Control Panel Mega ShieldRamps 1.4 Board 3D Printer Control Panel Mega Shield
Ramps 1.4 Board 3D Printer Control Panel Mega ShieldSpecifications:
- Supply Voltage: 12V
- Standard interfaces (as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A added to protect the component parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
₹587.64 (Inc. GST)₹498.00 (+18% GST Extra)Add to cart
₹312.70 (Inc. GST)₹265.00 (+18% GST Extra)Add to cart
Screw Shields V2 Terminal Expansion Board
Screw Shields V2 Terminal Expansion BoardScrew Shields V2 Terminal Expansion Board
Screw Shields V2 Terminal Expansion BoardSpecifications:
- Dimensions : 66 x 19 x 16 (LxWxH) mm.
- Weight: 28 gm.
- I/O Screw terminals.
- Directly plug-able.
- Arduino Compatible.
- Compatible with Arduino UNO R3, Arduino UNO
₹312.70 (Inc. GST)₹265.00 (+18% GST Extra)Add to cart
₹1,200.06 (Inc. GST)₹1,017.00 (+18% GST Extra)Add to cart
SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with Antenna
SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with AntennaSIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with Antenna
SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for Arduino UNO R3 Mega with AntennaFeatures:
- Standard serial RS232 interface
- Serial TTL interface for direct interface to microcontrollers
- Power, Status and Network LEDs for easy debugging
- Onboard MIC/Speaker circuits and 3.5mm audio connectors.
- Standard AT commands
- Comes with an onboard wire antenna for better reception. Board provides an option for adding an external antenna through an SMA connector
- Adjustable serial baudrate from 1200 to 115200 bps
₹1,200.06 (Inc. GST)₹1,017.00 (+18% GST Extra)Add to cart
₹413.00 (Inc. GST)₹350.00 (+18% GST Extra)Add to cart
TFT LCD Mega Shield V2.2
TFT LCD Mega Shield V2.2TFT LCD Mega Shield V2.2
TFT LCD Mega Shield V2.2Specification:
- Operating Voltage: 3.3V
- Fully compatible with Arduino MEGA
- Support 2.4″ and 3.2″ TFT display module
- Support both 8 bit and 16-bit mode
- Support both SD card and touch function simultaneously
₹413.00 (Inc. GST)₹350.00 (+18% GST Extra)Add to cart
₹1,392.40 (Inc. GST)₹1,180.00 (+18% GST Extra)Add to cart
USB HOST SHIELD ADK Arduino Compatible
USB HOST SHIELD ADK Arduino CompatibleUSB HOST SHIELD ADK Arduino Compatible
USB HOST SHIELD ADK Arduino CompatibleSpecifications:
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
The following device classes are currently supported by the shield:
- HID devices, such as keyboards, mice, joysticks, etc.
- game controllers – Sony PS3, Nintendo Wii, Xbox360
- USB to serial converters – FTDI, PL-2303, ACM, as well as certain cell phones and GPS receivers
- ADK-capable Android phones and tables
- Digital cameras – Canon EOS, Powershot, Nikon DSLRs and P&S, as well as generic PTP
- Mass storage devices, such as USB sticks, memory card readers, external hard drives
- Bluetooth dongles.
₹1,392.40 (Inc. GST)₹1,180.00 (+18% GST Extra)Add to cart