Sensors
Sensors are sophisticated devices that are frequently used to detect and respond to electrical or optical signals. A Sensor converts the physical parameter (for example temperature, blood pressure, humidity, speed, etc.) into a signal which can be measured electrically.
₹142.00Read more
₹142.00
0.28inch 3.5-30V Two Wire DC Voltmeter Red
0.28inch 3.5-30V Two Wire DC Voltmeter Red
₹142.00
0.28inch 3.5-30V Two Wire DC Voltmeter Red
0.28inch 3.5-30V Two Wire DC Voltmeter RedSpecifications:
- Operating Voltage: 3.5-30 VDC
- It is a 2-wire display.
- LED Color: RED
- Current Consumption : < 15 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 2.5 V.(but not measure accurately up to 3.6V).
₹338.00Add to cart
₹338.00
0.3MP OV7670 Camera Module with High Quality SCCB Connector
0.3MP OV7670 Camera Module with High Quality SCCB Connector
₹338.00
0.3MP OV7670 Camera Module with High Quality SCCB Connector
0.3MP OV7670 Camera Module with High Quality SCCB ConnectorSpecifications:
- Operating voltage: 2.5 to 3.0V
- Optical Size: 1.6 inch
- Pixel Resolution: 0.3 MP
- Angel of view: 67 degrees
- Image Area: 2.36 x 1.76 mm
- Active power: 60mW/15fps VGA
₹253.00Read more
₹253.00
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
₹253.00
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry Pi
1/4 Cmos 640X480 USB Camera with Collapsible Cable for Raspberry PiSpecificatons:
- Resolution: 640X480
- max pixels: 12m pixels
- Interface: USB 2.0
- Sensor: 1/4 Cmos
- Operating Current: <120 mA
- Picture Format: VGA
₹923.00Add to cart
₹923.00
1000TVL 90 degree CMOS Camera
1000TVL 90 degree CMOS Camera
₹923.00
1000TVL 90 degree CMOS Camera
1000TVL 90 degree CMOS CameraSpecifications:
- Working voltage range: 4.5V-6V DC.
- Angle: 90 degrees.
- Horizontal Resolution: 1000TVL.
- Image Sensor: 1/3″ CMOS.
- Pixels: 1280 x 720.
- Minimum Illumination: 0.05LUX/F1.2.
- White Balance: Automatic.
- Gain: Automatic.
- Digital Noise Reduction: Yes (2D).
- Gamma Correction: 0.45.
- S/N Ratio: ≥50dB.
₹525.00 ₹509.00Add to cart
100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter Sensor
100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter Sensor100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter Sensor
100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter SensorFeatures
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
₹40.00Add to cart
₹40.00
10K Trimpot Module i-Robotics
10K Trimpot Module i-Robotics
₹40.00
10K Trimpot Module i-Robotics
10K Trimpot Module i-Robotics₹42.00Add to cart
₹42.00
125 KHZ RFID Keyfob (2 Pieces)
125 KHZ RFID Keyfob (2 Pieces)
₹42.00
125 KHZ RFID Keyfob (2 Pieces)
125 KHZ RFID Keyfob (2 Pieces)Overview:
- EM4001 ISO based RFID IC
- 125kHz Carrier
- 2kbps ASK
- Manchester encoding
- 32-bit unique ID
- 64-bit data stream [Header+ID+Data+Parity]
₹42.00Add to cart
₹42.00
125khz RFID Card Thick (2 Pieces)
125khz RFID Card Thick (2 Pieces)
₹42.00
125khz RFID Card Thick (2 Pieces)
125khz RFID Card Thick (2 Pieces)Overview:
- Anticollision
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
- Operating frequency: 125KHz
- Contactless transmission of data and supply energy (no battery needed)
₹42.00Add to cart
₹42.00
125khz RFID Card Thin (2 Pieces)
125khz RFID Card Thin (2 Pieces) ₹42.00
125khz RFID Card Thin (2 Pieces)
125khz RFID Card Thin (2 Pieces)Specifications:
- Anticollision
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
- Operating frequency: 125KHz
- Contactless transmission of data and supply energy (no battery needed)
₹227.00Add to cart
₹227.00
12mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable Laser
12mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable Laser
₹227.00
12mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable Laser
12mm 5mW Red Point Laser Module MXD1230 Point Spot Size Adjustable LaserSpecifications:
- Laser Output Type: Red Point Laser
- Weight: 15 gm.
- Wavelength: 650nm
- Input Current: 40mA
- Input Voltage: 3~6V DC
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
- Focus point Intensity can be adjusted with the help of lens ring head
- Cable Length: 130mm
₹126.00Add to cart
₹126.00
12v 40W Ceramic Cartridge Heater
12v 40W Ceramic Cartridge Heater
₹126.00
12v 40W Ceramic Cartridge Heater
12v 40W Ceramic Cartridge HeaterSpecifications:
- Voltage(V)-12
- Power(W)-40
- Lead Length(mm)-20
- Lead Diameter(mm)-6
- Wire Length(cm)-100
- Lead Material-Stainless Steel
₹42.00Add to cart
₹42.00
13.56 Mhz RFID Card (5 Pieces)
13.56 Mhz RFID Card (5 Pieces)
₹42.00
13.56 Mhz RFID Card (5 Pieces)
13.56 Mhz RFID Card (5 Pieces)Specifications:
- Operating frequency: 13.56MHZ
- Data retention:> 10 years
- Working temperature: -20 ° -85 °
- Communication speed: 106Kboud
- Reading and writing distance: 2.5-10CM
- Reading and writing time: 1-2MS
- Storage capacity: 8Kbit, 16 partitions, two passwords per partition
- Number of erase cycles:> 100000 times
- Packaging materials: PVC, PET, 0.13 coins
- Packaging technology: ultrasonic automatic line / automatic welding
- Production standards: ISO 14443, ISO 10536
₹42.00Add to cart
₹42.00
13.56 Mhz RFID Keyfob (2 Pieces)
13.56 Mhz RFID Keyfob (2 Pieces) ₹42.00
13.56 Mhz RFID Keyfob (2 Pieces)
13.56 Mhz RFID Keyfob (2 Pieces)Specifications:
- Operating frequency: 13.56 MHz
- Material: ABS
- Storage temperature: -55 °C to 100 °C
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
- Memory capacity: 8 kbit
- Operating temperature: -45 °C to 85 °C
₹50.00Add to cart
₹50.00
2 x 2 Matrix 4 Push Button Keyboard Module
2 x 2 Matrix 4 Push Button Keyboard Module
₹50.00
2 x 2 Matrix 4 Push Button Keyboard Module
2 x 2 Matrix 4 Push Button Keyboard ModuleFeatures:
- 2×2 matrix keypad module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pins.
₹399.15Add to cart
₹399.15
2.2 Inch Flex Sensor
2.2 Inch Flex Sensor
₹399.15
2.2 Inch Flex Sensor
2.2 Inch Flex SensorSpecifications:
- Life Cycle: >1 million
- Height: 0.43mm (0.017″)
- Temperature Range: -35°C to +80°C
- Flat Resistance: 10K Ohms ±30%
- Bend Resistance: minimum 2 times greater than the flat resistance at 180° pinch bend (see “How it Works” below)
- Power Rating: 0.5 Watts continuous; 1 Watt Peak
₹67.00Add to cart
₹67.00
20mm GL20528 Light Sensitive Photoresistor LDR
20mm GL20528 Light Sensitive Photoresistor LDR
₹67.00
20mm GL20528 Light Sensitive Photoresistor LDR
20mm GL20528 Light Sensitive Photoresistor LDRSpecifications:
- Model: GL20528 ( GM20528 )
- Size: 20mm
- Max. voltage: 500 VDC
- Max. power: 500 mW
- Spectrum Peak Value (nm): 560
- Light resistance ( KΩ) : 10–20 kΩ
- Dark resistance ( KΩ): 2 kΩ.
- Υ value : 0.6.
- Increase response time: 30 mS.
- Decrease response time: 30 mS.
₹100.00Add to cart
₹100.00
25MM MF5B SMD 100K 1% Thin Film NTC Thermistor
25MM MF5B SMD 100K 1% Thin Film NTC Thermistor
₹100.00
25MM MF5B SMD 100K 1% Thin Film NTC Thermistor
25MM MF5B SMD 100K 1% Thin Film NTC Thermistor₹150.00Add to cart
₹150.00
3.5mm Female to 2 Male Gold Plated Headphone Mic Audio Y Splitter Flat Cable
3.5mm Female to 2 Male Gold Plated Headphone Mic Audio Y Splitter Flat Cable
₹150.00
3.5mm Female to 2 Male Gold Plated Headphone Mic Audio Y Splitter Flat Cable
3.5mm Female to 2 Male Gold Plated Headphone Mic Audio Y Splitter Flat CableSpecifications:
- Color: Black, Red (Optional)
- Interface: Two 3.5mm male heads to One 3.5mm female head
- Connector: Metal connector
- Length: 18cm / 7.08in
- Cable Weight: approx. 6g / 0.21oz
- Package Size: approx. 9 * 3.5 * 1cm / 3.54 * 1.37 * 0.39in
₹397.00Add to cart
₹397.00
32GB Sandisk Micro SD/SDHC Class 10 Memory Card For Raspberry PI
32GB Sandisk Micro SD/SDHC Class 10 Memory Card For Raspberry PI
₹397.00
32GB Sandisk Micro SD/SDHC Class 10 Memory Card For Raspberry PI
32GB Sandisk Micro SD/SDHC Class 10 Memory Card For Raspberry PIFeatures:
- Memory Size: 32 Gigabyte
- Card Type: Micro SD
- Speed: up to 98MB/s
- Class: 10
- High-speed Card can be used for both Mobile phone and Raspberry Pi
- 5 years of manufacturing defect Warranty Given by Sandisk.
₹1,432.30Add to cart
₹1,432.30
37 Sensors Kit
37 Sensors Kit
₹1,432.30
37 Sensors Kit
37 Sensors Kit₹127.00Add to cart
₹127.00
3D Printer 5A Limit Switch Endstop with 1m Long Cable
3D Printer 5A Limit Switch Endstop with 1m Long Cable
₹127.00
3D Printer 5A Limit Switch Endstop with 1m Long Cable
3D Printer 5A Limit Switch Endstop with 1m Long CableSpecifications:
- Limit Switch Voltage: 5A/ 125V and 3A/ 250V.
- Weight: 8 gm.
- Dimensions of a switch: 20 x 15 x 6 mm.
- Connecting cable Length: 1 meter.
₹805.00Add to cart
₹805.00
4.5 Inch Flex Sensor
4.5 Inch Flex Sensor
₹805.00
4.5 Inch Flex Sensor
4.5 Inch Flex SensorSpecifications:
- Life Cycle: >1 million
- Height: 0.43mm (0.017″)
- Temperature Range: -35°C to +80°C
- Flat Resistance: 10K Ohms ±30%
- Bend Resistance: minimum 2 times greater than the flat resistance at 180° pinch bend (see “How it Works” below)
- Power Rating: 0.5 Watts continuous; 1 Watt Peak
₹85.00Read more
₹85.00
4×3 Matrix 12 keys Membrane Switch Keypad
4×3 Matrix 12 keys Membrane Switch Keypad
₹85.00
4×3 Matrix 12 keys Membrane Switch Keypad
4×3 Matrix 12 keys Membrane Switch KeypadSpecifications:
- Operating Voltage (V): 12 DC
- Contact Resistance: 500Ω
- Insulation Resistance: 100MΩ
- Dielectric Strength: 250VRms
- Max. voltage rating (V): 35 VDC
- Max. current rating: 100mA
₹165.00Read more
₹165.00
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
₹165.00
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED StripSpecifications:
- Supply voltage: DC 12V
- Output current: 2 A each color
- Connecting mode: common anode
- Output: Three CMOS Drain-open Output
- Number Of buttons: 44
- Working temperature: -20℃-60℃
₹40.00Read more
₹40.00
5-24V Buzzer Continues Beep- Big 27C
5-24V Buzzer Continues Beep- Big 27C
₹40.00
5-24V Buzzer Continues Beep- Big 27C
5-24V Buzzer Continues Beep- Big 27CSpecifications:
- Power Source: DC (5v-24v)
- Material: Plastic
₹85.00Add to cart
₹85.00
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor
₹85.00
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensorSpecifications:
- Capacity (Kg): 50.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Output Sensitivity (mv/v): 1.0±0.1.
- Insulation Resistance (MΩ): ≥5000.
- Nonlinearity (%FS): 0.03.
₹380.00Add to cart
₹380.00
5A 12V Overcurrent Protection AC Current Detection Sensor Module
5A 12V Overcurrent Protection AC Current Detection Sensor Module
₹380.00
5A 12V Overcurrent Protection AC Current Detection Sensor Module
5A 12V Overcurrent Protection AC Current Detection Sensor ModuleOverview:
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
₹221.00Add to cart
₹221.00
5A range of single-phase AC current sensor module
5A range of single-phase AC current sensor module
₹221.00
5A range of single-phase AC current sensor module
5A range of single-phase AC current sensor moduleSpecifications:
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
₹500.00 ₹347.00Add to cart
5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with Cable
5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with Cable5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with Cable
5MP Raspberry Pi 3 Model B Camera Module Rev 1.3 with CableSpecifications:
- Fully Compatible with Both the Model A, Model B and Model B+ Raspberry Pi
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
₹584.00Read more
₹584.00
5MP Raspberry Pi Zero W Camera Module With HBV FFC Cable
5MP Raspberry Pi Zero W Camera Module With HBV FFC Cable
₹584.00
5MP Raspberry Pi Zero W Camera Module With HBV FFC Cable
5MP Raspberry Pi Zero W Camera Module With HBV FFC CableSpecifications:
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi Zero W.
- Directly plug into Raspberry Pi Board (besides HDMI port)
₹79.00Add to cart
₹79.00
6 Pin Universal Gas Sensor Socket
6 Pin Universal Gas Sensor Socket
₹79.00
6 Pin Universal Gas Sensor Socket
6 Pin Universal Gas Sensor Socket₹168.00Add to cart
₹168.00
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
₹168.00
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini QuadcopterSpecifications:
- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
₹55.50Add to cart
₹55.50
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
₹55.50
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
650nm 6mm 5V DC 5mW Mini Laser Dot Diode ModuleSpecifications:
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
₹160.00Add to cart
₹160.00
8 Way Capacitive Touch Sensor
8 Way Capacitive Touch Sensor
₹160.00
8 Way Capacitive Touch Sensor
8 Way Capacitive Touch SensorSpecifications:
- Power supply for 2.4 ~ 5.5V DC
- Typical high Voh = 0.8VCC
- Typical Vol = 0.3VCC
- Output Sink Current: 8mA
- Output pin pull-up current: 4mA
- Response time (Low Power mode): 220mS
- Response time: 60mS
₹52.00Add to cart
₹52.00
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
₹52.00
A3144 Hall Effect Sensor Magnet Detector Switch for Arduino
A3144 Hall Effect Sensor Magnet Detector Switch for ArduinoFeatures :
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet.
- The output voltage is equal to the operating voltage.
- Operating temperature: -40°C to 85°C.
- Turn on and Turn off time is 2 μsec each.
- Inbuilt reverse polarity protection.
- Suitable for Automotive and Industrial Applications.
₹72.00Add to cart
₹72.00
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
₹72.00
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D Printers
AC 125V 5A Micro Limit Switch KW4-3Z-3 Shaft Straightener for 3D PrintersSpecifications:
- Dielectric strength: 1500VAC for 1 Minute
- Contact Resistance: 30mΩ Max
- Insulation Resistance: 100MΩ Min
- Voltage Rating: 125-250V AC
- Current Rating: 5A
₹220.00Add to cart
₹220.00
ACS712 20AMP DC Current Sensor
ACS712 20AMP DC Current Sensor
₹220.00
ACS712 20AMP DC Current Sensor
ACS712 20AMP DC Current SensorSpecifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -20A ~ 20A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
₹233.06Add to cart
₹233.06
ACS712 30AMP DC Current Sensor
ACS712 30AMP DC Current Sensor ₹233.06
ACS712 30AMP DC Current Sensor
ACS712 30AMP DC Current SensorSpecifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -30A ~ 30A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
₹195.00Add to cart
₹195.00
ACS712 5AMP DC Current Sensor
ACS712 5AMP DC Current Sensor ₹195.00
ACS712 5AMP DC Current Sensor
ACS712 5AMP DC Current SensorOverview:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -5A ~ 5A
- Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
₹1,262.00Add to cart
₹1,262.00
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
₹1,262.00
AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
AD8232 Heart ECG Monitoring Sensor Module Kit for ArduinoFeatures
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
₹4,004.00Read more
₹4,004.00
Advanced Auto-Calibrating Line Sensor LSA08 Cytron
Advanced Auto-Calibrating Line Sensor LSA08 Cytron
₹4,004.00
Advanced Auto-Calibrating Line Sensor LSA08 Cytron
Advanced Auto-Calibrating Line Sensor LSA08 CytronFeatures:
- 8 sensor pairs spaced 16mm.
- 12V input power
- On board Mode and Select button for instant configuration of LSA08
- 3 Different output mode (digital output port, UART output port, analog output port)
- LCD display unit showing 8 sensors analog value with bar chart and line position.
- Simple Auto-Calibration function to the line following surface.
- Junction Pulse (JPULSE) for detecting junction crossing and junction counting
- Power polarity protection
- Low current consumption (typically 26mA)
- Works on glossy or reflective surface
- Refresh rate up to 200Hz.
₹297.00 ₹253.00Add to cart
ADXL335 Accelerometer Analog XYZ axis
ADXL335 Accelerometer Analog XYZ axisADXL335 Accelerometer Analog XYZ axis
ADXL335 Accelerometer Analog XYZ axisSpecifications:
- 3-axis sensing
- Small, low-profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power – 350 μA (typical)
- Single-supply operation- 1.8 V to 3.6 V
₹101.00Add to cart
₹101.00
ADXL345 Triple Axis Accelerometer Board
ADXL345 Triple Axis Accelerometer Board
₹101.00
ADXL345 Triple Axis Accelerometer Board
ADXL345 Triple Axis Accelerometer BoardSpecifications:
- Supply Voltage: 3.3 V or 5V.
- Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g.
- Output data rate (ODR) : 800 Hz
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
₹300.00Read more
₹300.00
AIR PRESSURE SENSOR 0-40KPA – ARDUINO COMPATIBLE
AIR PRESSURE SENSOR 0-40KPA – ARDUINO COMPATIBLE
₹300.00
AIR PRESSURE SENSOR 0-40KPA – ARDUINO COMPATIBLE
AIR PRESSURE SENSOR 0-40KPA – ARDUINO COMPATIBLESpecification:
- Measuring medium: air
- Measuring range: 0-40kPa
- Operating temperature range: -40 ℃ ~ + 125 ℃
- Storage Temperature: -40 ℃ ~ + 150 ℃
- Humidity: (50% ± 10%) RH
- Ambient temperature: (25 ± 1) ℃
- Medium temperature: (25 ± 1) ℃
- Output impedance: 4kΩ ~ 6kΩ
- Zero output: -15mV~+15mV
- Hysteresis: +-0.7%F.S.
- Power supply: ≤10V DC or ≤2.0mA DC
- Insulation resistance: 100MΩ, 100VDC
₹219.00Add to cart
₹219.00
AMT1001 Resistive Humidity and Temperature Sensor Module
AMT1001 Resistive Humidity and Temperature Sensor Module
₹219.00
AMT1001 Resistive Humidity and Temperature Sensor Module
AMT1001 Resistive Humidity and Temperature Sensor ModuleSpecifications:
- Supply voltage (Vin): DC5V ± 5%
- Operating temperature range: 0 to 60 ° C
- Humidity range: 95% RH (non condensing)
- Humidity range: 95% RH (non condensing)
₹84.00Add to cart
₹84.00
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
₹84.00
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work Tool
Anti Static ESD Wrist Strap Elastic Band with Clip for Sensitive Electronics Repair Work ToolOverview:
- The soft elastic band comfort.
- Inner conducting layer made of stainless shell filaments.
- Durable Polyurethane-Coated Coil Cords.
- Adjustable wrist strap with alligator clip tip.
- Rinsing Resisting.
- High-Quality Strain relief.
₹880.00Add to cart
₹880.00
Auto-Calibrating Line Sensor LSS05
Auto-Calibrating Line Sensor LSS05
₹880.00
Auto-Calibrating Line Sensor LSS05
Auto-Calibrating Line Sensor LSS05Specifications:
- 5V power, reserve polarity protected
- 5 digital outputs representing the logic of 5 IR sensor, represented with indicator each.
- Calibration button for easily calibrating the sensor
- Dimensions: 64x28x10 (LxWxH) mm.
- Weight: 8 gm.
₹95.00Read more
₹95.00
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
₹95.00
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NC
BK05 250V 5A 80°C Plastic Thermostatic Temperature Switch NCSpecifications:
- Rated Voltage: 250V
- Current: 5A
- Temperature: 80° C
- Cable Length: 73 mm
- Head Dimension: 20 x 8 x 4 (LxWxH) mm
₹216.00Add to cart
₹216.00
Black Aluminum Heat Sink Holder for 12mm Laser Module
Black Aluminum Heat Sink Holder for 12mm Laser Module
₹216.00
Black Aluminum Heat Sink Holder for 12mm Laser Module
Black Aluminum Heat Sink Holder for 12mm Laser ModuleFeatures:
- Inner Hole diameter For Laser Module: 12 mm
- Material: Aluminium alloy
- Anodized on the surface; effective antioxidant
- In can be installed directly on the laser gimbal
- For the heat dissipation of the laser module
- Sturdy and durable
- Easy to install with efficient heat dissipation
₹177.00Add to cart
₹177.00
BMP 180 PRESSURE SENSOR
BMP 180 PRESSURE SENSOR
₹177.00
BMP 180 PRESSURE SENSOR
BMP 180 PRESSURE SENSORSpecifications:
- Vin: 3 to 5VDC
- Logic: 3 to 5V compliant
- Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
- Up to 0.03hPa / 0.25m resolution
- -40 to +85°C operational range, +-2°C temperature accuracy
- This board/chip uses I2C 7-bit address 0x77.
