• Material : ABS + chip
• Onboard toggle switch : 5V/3V level interface
• Dimensions (mm) : 40 x 36 x 4

Specifications:

• Single-shot mode: automatically turns off
• Low current consumption: Continuous mode 150 μA
• Wide supply voltage range: 2.0V to 5.5V
• Interfacing is done via I2C
• Programmable data rate: 8SPS to 860SPS
• Low drift internal voltage reference
• Internal Oscillator
• Internal PGA up to 860 samples per second (SPS)
• Four single-ended or two differential inputs (ADS1115)
• Operating temperature : -40 ° C to + 140 ° C
• Programmable comparator

Specifications:

1. 32 I/O pin all the leads.
2. Classic ATmega16 minimum system, eliminating the hassle of soldering.
3. Crystal: The socket hole welding facilitates the buyer to replace the crystal, 8M crystal.
4. Support chips: ATmega16/ATmega32 and chip which pin-compatible.
5. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
6. DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
7. Expand outside 4 channel VCC, GND.
8. Reset: Power-on-reset and reset button.
9. Power LED (D1) and the program run indicator (D2).
10. Standard ISP download interface.

Features:

1. TTL interface output, easy to connect to your MCU.
2. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
3. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
4. Microcomputer with cold start reset button
5. Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
6. Built-in USB to TTL Transfer chip.
7. Designed to be used for USB to TTL electronic projects.

Features:

1. Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
2. With 24/25 status indicator lamp
3. Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
4. Recognize 25 series chip automatically
5. Supports download STC series procedure of single chip
6. SPI pin to support expanding the utility
7. STC microcontroller supports a full range of program download
8. Support expanding the utility by SPI pin
9. With SOP8 SOP16 to DIP8 converter board
10. Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
11. Provide 5V-3.3V power supply output

Specifications:

Features:

1. 3.3 V power supply pin.
2. SPI Interface with Clock Speeds Up to 20 MHz
3. The board 25MHZ crystal
4. Fully Compatible with 10/100/1000Base-T Networks
5. Integrated MAC and 10Base-T PHY
6. Supports One 10Base-T Port with Automatic Polarity Detection and Correction
7. Supports Full and Half-Duplex modes
8. Programmable Automatic Retransmit on Collision
9. SPI Interface with Clock Speeds Up to 20 MHz
10. For Arduino, SPI, AVR, PIC, LPC, STM32.

Specifications:

•  Input ports: 1xRCA (Yellow, White, Red), USB power
•  Output ports: 1xHDMI(standard)
•  NTSC/PAL compatible
•  Composite input: PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N
•  HDMI output: 1080p/60Hz, 720p/60Hz
• Power: USB Port Features: No need to install drivers, portable, flexible, plug and play.