12V Relays Modules
₹269.04 (Inc. GST)₹228.00 (+18% GST Extra)Add to cart
1 channel 12V 30A Relay Control Board Module with Optocoupler
1 channel 12V 30A Relay Control Board Module with Optocoupler1 channel 12V 30A Relay Control Board Module with Optocoupler
1 channel 12V 30A Relay Control Board Module with OptocouplerSpecifications :
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
₹269.04 (Inc. GST)₹228.00 (+18% GST Extra)Add to cart
₹100.30 (Inc. GST)₹85.00 (+18% GST Extra)Add to cart
12V 1 Channel Relay Module (with Optocoupler)
12V 1 Channel Relay Module (with Optocoupler)12V 1 Channel Relay Module (with Optocoupler)
12V 1 Channel Relay Module (with Optocoupler)Specification:
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
₹100.30 (Inc. GST)₹85.00 (+18% GST Extra)Add to cart
₹695.02 (Inc. GST)₹589.00 (+18% GST Extra)Add to cart
12V 16 Channel Relay Module (with Optocoupler)
12V 16 Channel Relay Module (with Optocoupler)12V 16 Channel Relay Module (with Optocoupler)
12V 16 Channel Relay Module (with Optocoupler)Specifications:
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
₹695.02 (Inc. GST)₹589.00 (+18% GST Extra)Add to cart
₹165.20 (Inc. GST)₹140.00 (+18% GST Extra)Add to cart
12V 2 Channel Relay Module (with Optocoupl
12V 2 Channel Relay Module (with Optocoupl12V 2 Channel Relay Module (with Optocoupl
12V 2 Channel Relay Module (with OptocouplFeatures:
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
₹165.20 (Inc. GST)₹140.00 (+18% GST Extra)Add to cart
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)Read more
Out of stock
12V 2 Channel Relay Module 30A T (with Optocoupler)
12V 2 Channel Relay Module 30A T (with Optocoupler)12V 2 Channel Relay Module 30A T (with Optocoupler)
12V 2 Channel Relay Module 30A T (with Optocoupler)Specifications:
- Coil Voltage: 12V
- Voltage: 20A for 120VAC/ 1HP, 240VAC/2HP & 30A for 28VDC
- No. of Channels: 2
- Relay Type: T relays
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)Read more
₹223.02 (Inc. GST)₹189.00 (+18% GST Extra)Add to cart
12V 4 Channel Relay Module (with Optocoupler)
12V 4 Channel Relay Module (with Optocoupler)12V 4 Channel Relay Module (with Optocoupler)
12V 4 Channel Relay Module (with Optocoupler)Features :
- This Board can be used to Control Solenoids, Motors, Lamps, etc,
- Input Logic: 12v level from MUC
- Indication LEDs for relay output status.• 12V 4-Channel relay board controlled directly by micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) need 50-60mA driver current
- Input IN1, IN2, IN3, IN4 signal line active low, 4-channel relay output module, relay output contact is maximum 250A 10A
- Input Pin connected to Burg stick. High-current, AC250V 10A, DC30V 10A.
₹223.02 (Inc. GST)₹189.00 (+18% GST Extra)Add to cart
₹400.02 (Inc. GST)₹339.00 (+18% GST Extra)Add to cart
12V 8 Channel Relay Module (with Optocoupler)
12V 8 Channel Relay Module (with Optocoupler)12V 8 Channel Relay Module (with Optocoupler)
12V 8 Channel Relay Module (with Optocoupler)Features:
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- A freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED status indicators to indicate the relay ON/OFF status
- Mounting holes provided
₹400.02 (Inc. GST)₹339.00 (+18% GST Extra)Add to cart
₹68.44 (Inc. GST)₹58.00 (+18% GST Extra)Add to cart
12V Relay Module Single Channel (HIGH LEVEL)
12V Relay Module Single Channel (HIGH LEVEL)12V Relay Module Single Channel (HIGH LEVEL)
12V Relay Module Single Channel (HIGH LEVEL)Specifications
- 250VAC 10A, 28VDC 10A
- Indicator LEDs
- 12V control voltage
- Module size: 43mm x 17mm
₹68.44 (Inc. GST)₹58.00 (+18% GST Extra)Add to cart
₹68.44 (Inc. GST)₹58.00 (+18% GST Extra)Add to cart
12V Relay Module Single Channel (LOW LEVEL)
12V Relay Module Single Channel (LOW LEVEL)12V Relay Module Single Channel (LOW LEVEL)
12V Relay Module Single Channel (LOW LEVEL)Specifications
- 250VAC 10A, 28VDC 10A
- Indicator LEDs
- 12V control voltage
- Module size: 43mm x 17mm
₹68.44 (Inc. GST)₹58.00 (+18% GST Extra)Add to cart
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)Read more
Out of stock
2 Channel DC 12V IR Infrared Remote Control Switch High-current Relay Module Board LED Status Indicator
2 Channel DC 12V IR Infrared Remote Control Switch High-current Relay Module Board LED Status Indicator2 Channel DC 12V IR Infrared Remote Control Switch High-current Relay Module Board LED Status Indicator
2 Channel DC 12V IR Infrared Remote Control Switch High-current Relay Module Board LED Status IndicatorSpecifications :
- voltage: 5V (VCC+ 5V Positive; GND-Negative)
- Static working current <1mA Pick-Up Current <120mA With LED status indicator Control
- Range: up to 8 meters
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)Read more
₹47.20 (Inc. GST)₹40.00 (+18% GST Extra)Add to cart
DL202-C-12VDC RELAY
DL202-C-12VDC RELAYDL202-C-12VDC RELAY
DL202-C-12VDC RELAYSpecifications :
- Telecom DPDT Relay
- Coil Voltage: 12V
- Contact Rating (Current): 2A
- Switching Voltage: 220VDC-Max
₹47.20 (Inc. GST)₹40.00 (+18% GST Extra)Add to cart
₹120.36 (Inc. GST)₹102.00 (+18% GST Extra)Add to cart
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12VNE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12VSpecifications:
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
₹120.36 (Inc. GST)₹102.00 (+18% GST Extra)Add to cart
₹198.24 (Inc. GST)₹168.00 (+18% GST Extra)Add to cart
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletrNE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletrSpecifications:
- Timing from microseconds to long hours.
- Simple circuit design.
- Precision Pulse Generation / Timing.
- Use a single 4V to 16V DC supply.
- Excellent temperature stability 0.005% / oC.
- Adjustable Duty Cycle.
- Monostable Operation.
- Countless Application and Information Sources.
- For the applications of Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
₹198.24 (Inc. GST)₹168.00 (+18% GST Extra)Add to cart
₹99.12 (Inc. GST)₹84.00 (+18% GST Extra)Add to cart
PC817 2 CH Optocoupler Isolation Module
PC817 2 CH Optocoupler Isolation ModulePC817 2 CH Optocoupler Isolation Module
PC817 2 CH Optocoupler Isolation ModuleSpecification:
- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
₹99.12 (Inc. GST)₹84.00 (+18% GST Extra)Add to cart
₹199.42 (Inc. GST)₹169.00 (+18% GST Extra)Add to cart
PC817 4 CH Optocoupler Isolation Module
PC817 4 CH Optocoupler Isolation ModulePC817 4 CH Optocoupler Isolation Module
PC817 4 CH Optocoupler Isolation ModuleSpecifications:
- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers
₹199.42 (Inc. GST)₹169.00 (+18% GST Extra)Add to cart