Showing 1–24 of 123 results
Motor drives are circuits used to run a motor. In other words, they are commonly used for motor interfacing. These drive circuits can be easily interfaced with the motor and their selection depends upon the type of motor being used and their ratings (current, voltage).
1.5Amp 7V-25V DC Motor Driver (4 Channels)
₹2,361.18 (Inc. GST)₹2,001.00 (+18% GST Extra)
Features:
- Bidirectional control for four (4) brushed DC motors.
- Operating Voltage: DC 7V to 25V
- Maximum Motor Current: 1.5A continuous, 2.5A peak
- Buttons for quick testing.
- LEDs for motor output state.
- PWM and DIR inputs.
- Inputs compatible with 3.3V and 5V logic (Arduino, Raspberry Pi, PLC, etc).
- Reverse polarity protection.
- Board size: 10.67cm x 5.21cm
Please Note: If this material is not available in our stock, we will arrange & ship it in 3 working days if still we unable to proceed; we will refund 100% of your payment.
10000W AC 220V Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
₹988.84 (Inc. GST)₹838.00 (+18% GST Extra)
Specification:
- Operating Voltage (VDC) -AC 220V
- Maximum Power (W) -10000
- Voltage Range (adjust temperature or light) -AC 0-220V
- Controller Size- 95.7*56.7*53.8mm/3.76*2.23*2.11″
- Panel Size- 74.6*59.8*2.3mm/2.93*2.35*0.09″
- Cable Length -287mm/11.3″
- Weight (g) -200
10000W Super Power Thyristor Electronic Voltage Regulator, Adjust Light Speed Temperature
₹1,097.40 (Inc. GST)₹930.00 (+18% GST Extra)
Specification:
- Operating Voltage (VDC) AC -220V
- Maximum Power (W)- 10000
- Voltage Range (adjust temperature or light) -AC 0-220V
- Controller Size – 95.7*56.7*53.8mm/3.76*2.23*2.11″
- Panel Size- 74.6*59.8*2.3mm/2.93*2.35*0.09″
- Cable Length- 287mm/11.3″
- Weight (g) -200
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
₹96.00 (Inc. GST)₹81.36 (+18% GST Extra)
Specifications:
- Voltage range: DC6V – 28V
- Current range: Within 3A
- Switch function: None
- Speed range: 0-100%
- Dimension: 65 x 30 x 15mm
- Weight: 25 g
12V-24V 8A Adjustable Dimmer Switch For Single LED Strip
₹128.62 (Inc. GST)₹109.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 12 – 24VDC
- Operating Current: up to 8A
- Operating Temperature: -20 to 60
- Function: Can achieve stepless dimming
12V-40V 10A DC Motor PWM Speed Control Switch Governor
₹148.99 (Inc. GST)₹126.27 (+18% GST Extra)
Specification:
- Input supply voltage: DC 12V-40V
- The maximum output power: 400W
- The maximum continuous output current:8A
- Static Current:0.02 A ( Standby )
- PWM frequency: 13kHz
- Duty Cycle adjustable: 10%-100%
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
₹345.74 (Inc. GST)₹293.00 (+18% GST Extra)
Specifications:
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
170W High Power H-Bridge Motor Driver Module For NMOS Brake Duty Cycle For DC 5-40V Motor 4 External NMOS Tubes Two PWM Inputs
₹1,308.62 (Inc. GST)₹1,109.00 (+18% GST Extra)
Specifications:
- With full bridge driver chip + low resistance 55V110ANMOS,
the motor can be turned forward and backward. - Two PWM inputs, dutycycle regulated in 0-100%. Instant braking ability.
- The working voltage is 10-40V and the power is below 170W
- The control is simple and convenient. Only 3 input lines are needed to control the motor
- Chip built-in dead time hardware control, more suitable for frequent reversing.
Reduce the loss of the pipe itself. - Tin plating on the back of the module. A conductor can flow through a larger current.
- Support 5V, 3..3V logical input. Suitable for all types of single-chip IO port direct control.
You can also control the positive and negative rotation of the motor by analog input. - Board size: 38.8*67.5mm
2000W DC 9V-55V 40A Motor Speed Controller Electric PWM Speed Control Regulator
₹379.96 (Inc. GST)₹322.00 (+18% GST Extra)
Specifications:
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
2000W DC 9V-55V 40A Motor Speed Controller Electric PWM Speed Control Regulator with Reversible Switch
Original price was: ₹1,121.00.₹885.00Current price is: ₹885.00. (Inc. GST)₹750.00 (+18% GST Extra)
Specifications:
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
20A Bidirectional Digital ESC
₹741.04 (Inc. GST)₹628.00 (+18% GST Extra)
Specifications:
- Operating Voltage (VDC) :3 ~ 9
- Constant Current :20A
- Maximum Current :25A
- Battery Input :Li-Po 2S
- Driver Frequency:2KHz
- Dimensions (LxWxH): 35x22x6 mm
20A Brushed Electronic Speed Controller
₹539.26 (Inc. GST)₹457.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 3 – 9VDC
- Output Current: 20A
- Battery Input: 2S Lipo
- Driver Frequency: 2KHz
20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
₹374.06 (Inc. GST)₹317.00 (+18% GST Extra)
Features :
- Adjustable speed range: 0%-100%.
- Speed adjustment way: Potentiometer.
- Output voltage: Linear under load.
- Speed control type: Basins.
- Output voltage: Load Linear
- Type: Adjusting flow
- The motor running condition adjustment: Forward / Stop / Reverse
- Reverse polarity protection: Yes.
- Suitable Motor: DC brush motors.
28BYJ-48 5V 4-Phase Stepper Motor +ULN2003 Driver Board
₹135.70 (Inc. GST)₹115.00 (+18% GST Extra)
Specifications :
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
2×30 Cytron SmartDrive MDDS30 (80A Peak)
₹5,490.00 (Inc. GST)₹4,652.54 (+18% GST Extra)
Features:
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Maximum current up to 80A peak (1 second), 30A continuous, each channel.
- On board MOSFETs are switched at 18 KHz for quiet operation.
- Regenerative Braking.
2×32 Sabertooth Motor Driver
₹9,438.99 (Inc. GST)₹7,999.15 (+18% GST Extra)
Specifications:
- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
- Input modes: analog, R/C, serial (plain text or packetized), USB
- Power outputs can act as voltage clamps, brakes, or be controllable
- Size: 2.75” x 3.5” x 1.0” || 70 x 90 x 25 mm
2×5 Sabertooth Motor Driver for R/C
₹4,189.00 (Inc. GST)₹3,550.00 (+18% GST Extra)
Specifications:
- Weight: 18g / 0.6oz
- Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
- 5A continuous per channel, 10A peak
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm
- 5″ / 13cm servo pigtails
2×60 Cytron 7V-45V SmartDrive DC Motor Driver (100Amp Peak)
₹12,064.01 (Inc. GST)₹10,223.73 (+18% GST Extra)
Specifications:
-
DC Brush motor Driver, not for brushless motor
-
Input Voltage (Motor): 7 – 45VDC
-
Single power operation, just connect power to battery input.
-
Dual Channels, it can drives two brush motor independently, or mixed.
-
Regenerative Braking.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
-
Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Top cover comes with two DC brushless fans to cool the driver.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
2×60 Sabertooth Motor Driver
₹15,644.99 (Inc. GST)₹13,258.47 (+18% GST Extra)
Specifications:
- 60A continuous, 120A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
- Size: 3” x 3.5” x 1.8” || 76 x 89 x 46 mm
3000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V)
₹311.52 (Inc. GST)₹264.00 (+18% GST Extra)
Specification:
- Input Voltage: 220V AC.
- Maximum Power: 3000W.
- Adjustable Voltage: 0-220V AC.
- AC frequency: 50-60Hz.
- Size(LxWxH): Approx. 57 x 49 x 27 mm.
- Material: Plastic, metal.
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
Original price was: ₹798.86.₹548.99Current price is: ₹548.99. (Inc. GST)₹465.25 (+18% GST Extra)
Features:
This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which used as a signal for stepper drivers. To control the stepper motor.
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
₹65.50 (Inc. GST)₹55.50 (+18% GST Extra)
Specifications:
- Operating voltage: DC 4.5V- DC 35V
- Output current: 0-5A
- Output power: 90W (max)
- Quiescent current: 7uA (standby)
- PWM duty cycle: 1% -100%
- PWM frequency: 20khz
- Size: 30mm x 26mm x 14mm
4000W AC High-Power Thyristor Electronic Regulator, Dimming Speed Regulation, with Shell
Original price was: ₹278.48.₹251.34Current price is: ₹251.34. (Inc. GST)₹213.00 (+18% GST Extra)
Specifications:
- Input Voltage: 220V AC.
- Maximum Power: 4000W.
- Adjustable Voltage: 0-220V AC.
- AC frequency: 50-60Hz.
5-36v Switch Drive High-power MOSFET Trigger Module
₹149.86 (Inc. GST)₹127.00 (+18% GST Extra)
Overview:
This 5-36v Switch Drive High-power MOSFET Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, PWM, motor speed control, lamp brightness. etc.