PIC Programmer Development Board
ICSP Programmer Socket – UIC-S
ICSP Programmer Socket – UIC-SICSP Programmer Socket – UIC-S
ICSP Programmer Socket – UIC-S- No external power needed
- Power Indicator LED on board
- Fit perfectly with UIC00A and UIC00B
- Support 18-pin, 28-pin and 40-pin 8-bit PIC micro-controller.
- Selector to program 18-pin or 28-pin&40-pin PIC
- Come with 40-pin ZIF socket for ease of plug and unplug of PIC
PIC 18F4550 IC
PIC 18F4550 ICPIC 18F4550 IC
PIC 18F4550 ICFeatures:
PIC18F4550 – Simplified Features | |
CPU | 8-bit |
Total Number of Pins | 40 |
Operating Voltage | +4.0 to +5.5 V (+5.5V being absolute maximum) |
Number of programmable I/O pins | 35 |
Communication Interface | USB Serial Interface (23,24 PINS) [Can be used for programming this controller] Master/Slave SPI Serial Interface(7,26,33, 34 PINS) [Can be used for programming this controller] Programmable Serial UART(25,26 PINS) [Can be used for programming this controller] Two-wire Serial Interface(33, 34 PINS)[Can be used to connect peripheral devices like sensors and LCDs] |
ADC Module | 13channels, 10-bit resolution ADC |
Timer Module | One 8-bit counter, Three 16-bit counter |
Analog Comparators | 2 |
PWM channels | 4 |
External Oscillator | Up to 48MHz |
Internal Oscillator | 32KHz-8MHz Calibrated Internal Oscillator |
Program Memory Type | Flash |
Program Memory | 32Kbytes[10000 write/erase cycles] |
CPU Speed | 12 MIPS |
RAM Bytes | 2KBytes |
EEPROM | 256Bytes |
Watchdog Timer | Programmable Watchdog Timer with Separate On-chip Oscillator |
Power Save Modes | Available |
Operating Temperature | -40°C to +85°C(+85 being absolute maximum, -40 being absolute minimum) |
PIC Development Board Small
PIC Development Board SmallPIC Development Board Small
PIC Development Board SmallPIC Programmer Development Board
PIC Programmer Development BoardPIC Programmer Development Board
PIC Programmer Development BoardFEATURES :
1. PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A – 40 PIN).
2. ICSP Socket for Programming through PICKIT2 or PICKIT3.
3. On board Regulated 5v ,12v Supply.
4. Easy to test with Burg Connectors wires.
5. An RS232 Serial Port.
6. 7 Segment Multiplexed Display.
7. DC Power Supply Connector(12v Ac or Dc).
8. READY INTERFACE For LCD display 2linex16Character.
9. 24Cxx (I2C) (EEPROM).
10. RTC (DS1307).
11. 4 LED array.
12. Matrix Key Pad.
13. 4 Interrupt Switches.
14. ADC Interface Support.
15. ULN2008 Support For Interfacing Stepper Motors. Package Content : PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A – 40 PIN).
₹1,250.00Add to cart
PICKIT 3.5 Debugger / Programmer
PICKIT 3.5 Debugger / ProgrammerPICKIT 3.5 Debugger / Programmer
PICKIT 3.5 Debugger / ProgrammerSpecification :
- USB (Full speed 12 Mbits / s interface to host PC)
- Real-time execution
- MPLAB IDE compatible (free download from Microchip)
- built-in over-voltage / short circuit monitor
- Firmware upgradeable from PC / web download
- totally enclosed
- Diagnostic LEDs (power, busy, error)
- read/write program and data memory from a microcontroller
- erase program memory with Verification
- Freeze peripherals at a breakpoint
- program up to 512K byte flash with the Programmer to Go
- ICSP cable included
₹1,250.00Add to cart
₹1,020.00Add to cart
PICKIT3 USB PIC PROGRAMMER/DEBUGGER
PICKIT3 USB PIC PROGRAMMER/DEBUGGERPICKIT3 USB PIC PROGRAMMER/DEBUGGER
PICKIT3 USB PIC PROGRAMMER/DEBUGGERSpecifications:
- Type: Debugger/Programmer
- Tool/Board Application: Debugging/Programming
- MCU Supported Families: Flash-based PIC MCUs
- Core Architecture: PIC, dsPIC
- IC Product Type: In-Circuit Debugger
₹1,020.00Add to cart