Arduino
Arduino is an open-source hardware and software. Many development boards and shields of Arduino available. Easy to use & build project even if you are first time user.
₹415.25Read more
₹415.25
1.44 inch TFT LCD Color Screen Module SPI Interface
1.44 inch TFT LCD Color Screen Module SPI Interface
₹415.25
1.44 inch TFT LCD Color Screen Module SPI Interface
1.44 inch TFT LCD Color Screen Module SPI InterfaceSpecifications:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 128
- PCB Size (mm): 44×30 (LxW)
- Interface Type: SPI
₹466.00Add to cart
₹466.00
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
₹466.00
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPISpecifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI
₹195.00Read more
₹195.00
1602 LCD Keypad Shield Green Backlight
1602 LCD Keypad Shield Green Backlight
₹195.00
1602 LCD Keypad Shield Green Backlight
1602 LCD Keypad Shield Green BacklightSpecifications:
- The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character green backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
₹480.00Read more
₹480.00
2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino Shield
₹480.00
2.4 inch Touch TFT LCD Arduino Shield
2.4 inch Touch TFT LCD Arduino ShieldSpecifications:
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
₹1,271.00Add to cart
₹1,271.00
3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino Shield
₹1,271.00
3.5 inch TFT Arduino Shield
3.5 inch TFT Arduino ShieldSpecifications:
- LCD’s type: TFT
- LCD interface: SPI
- Touch screen type: Resistive
- Colours: RGB,65K colours
- Resolution: 480*320 pixels
- Aspect ratio: 8:5
- I/O Voltage: 3.3/5V
₹126.00Add to cart
₹126.00
Acrylic Case for Arduino Mega
Acrylic Case for Arduino Mega
₹126.00
Acrylic Case for Arduino Mega
Acrylic Case for Arduino MegaFeatures
- Protective case of Mega 2560.
- Color: Transparent.
- Fastened by eight screws.
- Made by high grade acrylic.
- Provides excellent protection, with fashion appearance.
- Unique design for Mega 2560 with pin leakage, which provides easy connection to other components.
₹297.00Add to cart
₹297.00
ARDUINO LELY PAD BIG ATMEGA328P
ARDUINO LELY PAD BIG ATMEGA328P
₹297.00
ARDUINO LELY PAD BIG ATMEGA328P
ARDUINO LELY PAD BIG ATMEGA328PFeatures
- Microcontroller : ATmega168V or ATmega328V
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB
EEPROM 512 bytes Clock Speed 8 MHz
₹750.00Add to cart
₹750.00
Arduino Mega ATMEGA2560 16U
Arduino Mega ATMEGA2560 16U
₹750.00
Arduino Mega ATMEGA2560 16U
Arduino Mega ATMEGA2560 16UFeatures
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13
₹650.00Add to cart
₹650.00
Arduino Micro V2 Board ATMEGA32U4 i-Robotics
Arduino Micro V2 Board ATMEGA32U4 i-Robotics
₹650.00
Arduino Micro V2 Board ATMEGA32U4 i-Robotics
Arduino Micro V2 Board ATMEGA32U4 i-RoboticsSpecifications:
- Manufacturer: i-Robotics
- Support TWI and SPI communication
- Input voltage (recommended) range from 7V to 12V
- Input Voltage (limit) range from 6V to 20V
- 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs)
- Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
₹450.00Add to cart
₹450.00
Arduino Micro- iRobotics
Arduino Micro- iRobotics
₹450.00
Arduino Micro- iRobotics
Arduino Micro- iRobotics₹185.00Add to cart
₹185.00
Arduino Nano R3 with CH340 Chip (Without Soldered)
Arduino Nano R3 with CH340 Chip (Without Soldered)
₹185.00
Arduino Nano R3 with CH340 Chip (Without Soldered)
Arduino Nano R3 with CH340 Chip (Without Soldered)Features
- Microcontroller ATmega328
- Architecture AVR
- Operating Voltage : 5 V
- Flash Memory : 32 KB of which 2 KB used by bootloader
- SRAM : 2 KB
- Clock Speed : 16 MHz
- Analog IN Pins : 8
- EEPROM : 1 KB
- DC Current per I/O Pins : 40 mA (I/O Pins)
- Input Voltage : 7-12 V
- Digital I/O Pins : 22 (6 of which are PWM)
- PWM Output : 6
- Power Consumption : 19 mA
- PCB Size : 18 x 45 mm
- Weight : 7 g
₹169.00Add to cart
₹169.00
Arduino Sensor Shield V5 Expansion Board
Arduino Sensor Shield V5 Expansion Board
₹169.00
Arduino Sensor Shield V5 Expansion Board
Arduino Sensor Shield V5 Expansion BoardQuick Overview:
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
₹339.00Add to cart
₹339.00
Arduino UNO R3
Arduino UNO R3
₹339.00
Arduino UNO R3
Arduino UNO R3Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
₹355.00Add to cart
₹355.00
Arduino UNO R3 (With Logo)
Arduino UNO R3 (With Logo)
₹355.00
Arduino UNO R3 (With Logo)
Arduino UNO R3 (With Logo)Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
₹620.00Add to cart
₹620.00
Basic Starter/Beginner/Learning Kit for Arduino Uno
Basic Starter/Beginner/Learning Kit for Arduino Uno
₹620.00
Basic Starter/Beginner/Learning Kit for Arduino Uno
Basic Starter/Beginner/Learning Kit for Arduino UnoOverview:
- This is our most basic Arduino starter kit
- The kit contains enough parts to get you started and allows you to develop basic skills within minutes of opening the parcel with little to no electronics experience
- The Arduino is a microcontroller that allows you to access sensors and control things with just a little programming.
₹720.00Add to cart
₹720.00
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
₹720.00
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)Specifications:
- ATmega328 chip on the module
- Compatible with for Arduino Uno
- Switch 5V or 3.3V GPIO
- Compatible with Processing code
- Expand SPI of Banana Pi
- Working voltage: 3.3V-4.5V
- GPIO voltage: 3.3V or 5.5
- 8 channel 10bit high-resolution ADC
₹161.02Add to cart
₹161.02
CNC Shield V3 Arduino Uno Mega Compatible
CNC Shield V3 Arduino Uno Mega Compatible
₹161.02
CNC Shield V3 Arduino Uno Mega Compatible
CNC Shield V3 Arduino Uno Mega CompatibleFeatures
- Interfaces with Arduino Uno.
- 4 stepper motor driver outputs, 3 Axis + 1 Slave.
- Compatible with Pololu A4988 and DRV8825 stepper drivers and others.
- 6 Limit switch inputs.
- I2C and UART outputs.
- Additional connections available for Spindle Control, Stop/Start & Emergency Buttons.
- Fully tested after assembly.
₹200.00Add to cart
₹200.00
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
₹200.00
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
CNC Shield V4.0 3-Axis Stepper Motor Drive BoardFeatures :
- 3 Axis stepper motor driver.
- Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
- Worked with Arduino nano.
₹1,325.00Add to cart
₹1,325.00
Cytron 10A Motor Driver Shield – MD10
Cytron 10A Motor Driver Shield – MD10
₹1,325.00
Cytron 10A Motor Driver Shield – MD10
Cytron 10A Motor Driver Shield – MD10Specifications:
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Selectable digital pins for PWM and DIR.
₹1,143.00Add to cart
₹1,143.00
Cytron Arduino PS2 Shield
Cytron Arduino PS2 Shield
₹1,143.00
Cytron Arduino PS2 Shield
Cytron Arduino PS2 ShieldSpecifications:
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
₹524.00Add to cart
₹524.00
Cytron LCD keypad Shield High Quality
Cytron LCD keypad Shield High Quality
₹524.00
Cytron LCD keypad Shield High Quality
Cytron LCD keypad Shield High QualityQuick Overview:
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
₹584.00Add to cart
₹584.00
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
₹584.00
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible Module
Cytron Maker UNO Microcontroller Board- Arduino UNO Compatible ModuleSpecifications:
- SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
- USB Programming facilitated by the CH340
- Input voltage: USB 5V, from computer, power bank or standard USB adapter
- Piezo buzzer that will act as simple audio output
- 500mA (maximum) 3.3V voltage regulator
- 0-5V outputs with 3.3V compatible inputs
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP 6-pin Header
₹246.00Read more
₹246.00
Data Logger module Logging Shield data Recorder Shield
Data Logger module Logging Shield data Recorder Shield
₹246.00
Data Logger module Logging Shield data Recorder Shield
Data Logger module Logging Shield data Recorder ShieldSpecifications:
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- A real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
₹1,680.00Add to cart
₹1,680.00
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
₹1,680.00
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered₹1,334.00Add to cart
₹1,334.00
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
₹1,334.00
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with ArduinoSpecifications:
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
₹2,037.00Add to cart
₹2,037.00
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)
₹2,037.00
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)Specifications:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Flash Memory: 32 KB of which 4 KB used by bootloader
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
₹415.50Add to cart
₹415.50
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
₹415.50
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for ArduinoSpecifications:
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
₹152.00Add to cart
₹152.00
L293D Motor Driver/Servo Shield for Arduino
L293D Motor Driver/Servo Shield for Arduino
₹152.00
L293D Motor Driver/Servo Shield for Arduino
L293D Motor Driver/Servo Shield for ArduinoSpecifications:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
- Download the easy-to-use Arduino software library, check out the examples and you’re ready to go!
₹490.00Add to cart
₹490.00
Leonardo R3 Board Micro-USB compatible with Arduino
Leonardo R3 Board Micro-USB compatible with Arduino
₹490.00
Leonardo R3 Board Micro-USB compatible with Arduino
Leonardo R3 Board Micro-USB compatible with ArduinoSpecifications:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
₹50.00Add to cart
₹50.00
LilyPad Button Board Module For Arduino
LilyPad Button Board Module For Arduino
₹50.00
LilyPad Button Board Module For Arduino
LilyPad Button Board Module For ArduinoQuick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹211.00Add to cart
₹211.00
LilyPad Buzzer
LilyPad Buzzer
₹101.00Read more
₹101.00
LilyPad Coin Cell Battery Holder CR2032 Battery Module
LilyPad Coin Cell Battery Holder CR2032 Battery Module
₹101.00
LilyPad Coin Cell Battery Holder CR2032 Battery Module
LilyPad Coin Cell Battery Holder CR2032 Battery ModuleQuick Overview:
- Model: LilyPad
- Colour: Purple
- Material: CCL
- Dimensions: 30 x 30 x 6 (LxWxH) mm.
- Weight: 3 gm.
₹50.00Add to cart
₹50.00
LilyPad LED Blue Color
LilyPad LED Blue Color
₹50.00
LilyPad LED Blue Color
LilyPad LED Blue ColorQuick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
₹51.00Add to cart
₹51.00
LilyPad LED White Color
LilyPad LED White Color
₹51.00
LilyPad LED White Color
LilyPad LED White ColorQuick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!
₹152.00Read more
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for ArduinoQUICK OVERVIEW
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹152.00Add to cart
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
₹152.00
LilyPad Pixel Board WS2812 RGB LED Module for Arduino
LilyPad Pixel Board WS2812 RGB LED Module for ArduinoSpecifications:
- Outer Diameter (OD)(mm): 20mm
- Thickness (mm): 0.9
- Weight: 0.095 kg
₹50.00Add to cart
₹50.00
LilyPad Slide Switch Module
LilyPad Slide Switch Module
₹50.00
LilyPad Slide Switch Module
LilyPad Slide Switch ModuleQuick Overview:
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹76.00Add to cart
₹76.00
LilyPad Tri-Color LED RGB Module for Arduino
LilyPad Tri-Color LED RGB Module for Arduino
₹76.00
LilyPad Tri-Color LED RGB Module for Arduino
LilyPad Tri-Color LED RGB Module for ArduinoQUICK OVERVIEW
LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
₹924.00Read more
₹924.00
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
₹924.00
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino MegaSpecifications:
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
₹109.32Add to cart
₹109.32
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
₹109.32
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560Specifications:
- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
₹465.00Add to cart
₹465.00
MINI USB Host Shield 2.0 ADK
MINI USB Host Shield 2.0 ADK
₹465.00
MINI USB Host Shield 2.0 ADK
MINI USB Host Shield 2.0 ADK₹126.00Read more
₹126.00
Nano 328P Expansion Board
Nano 328P Expansion Board
₹126.00
Nano 328P Expansion Board
Nano 328P Expansion BoardFeatures:
- 14 I/O Pin (servo type with GND, power, and signal).
- 8 analog Pin with power output and GND.
- 6 PWM Pin.
- 1 Servo power input.
- 5 I2C expansion Pin.
- 1 AREF output.
- 1 3.3V output.
₹165.00
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
₹165.00
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)Specifications:
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
₹211.00Add to cart
₹211.00
NANO IO Shield Expansion Board For Arduino Screw Terminals
NANO IO Shield Expansion Board For Arduino Screw Terminals
₹211.00
NANO IO Shield Expansion Board For Arduino Screw Terminals
NANO IO Shield Expansion Board For Arduino Screw TerminalsSpecifications:
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size.
- Leads all pins out, convenient for wiring and doing experiments.
- Dimensions: 53 x 36 x 12 (LxWxH) mm.
- Weight: 22 gm.
₹1,354.00Add to cart
₹1,354.00
Original Arduino Uno R3
Original Arduino Uno R3
₹1,354.00
Original Arduino Uno R3
Original Arduino Uno R3Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
₹253.00Add to cart
₹253.00
OV7670 Camera Arduino Compatible
OV7670 Camera Arduino Compatible
₹253.00
OV7670 Camera Arduino Compatible
OV7670 Camera Arduino CompatibleSpecifications:
- IO Voltage: 2.5V to 3.0V.
- Operating Power: 60mW/15fps.
- Lens Size: 1/6″.
- Sleeping Mode: <20 uA.
- Pixel Coverage: 3.6μm x 3.6μm.
- Electronic Exposure: 1 to 510 row.
- Dynamic range: 52 dB.
₹295.76Read more
₹295.76
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
₹295.76
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For ArduinoSpecifications:
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
₹194.00Add to cart
₹194.00
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
₹194.00
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
Pro Mini ATMEGA328P 3.3V/8M (Official Version)specifications:
- Microcontroller: ATmega328
- Circuit Operating Voltage: 3.3V
- Clock frequency: 8MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹202.50Add to cart
₹202.50
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
₹202.50
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
Pro Mini ATMEGA328P 5V/16M Blue – Standard VersionSpecifications:
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹304.00Add to cart
₹304.00
Proto Screw Shield 1.0 For Arduino Uno
Proto Screw Shield 1.0 For Arduino Uno
₹304.00
Proto Screw Shield 1.0 For Arduino Uno
Proto Screw Shield 1.0 For Arduino UnoSpecifications:
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
