Specifications:

• 32A continuous, 64A peak per channel
• 6-30V nominal, 33.6V absolute maximum
• Synchronous regenerative drive
• Ultrasonic 30 kHz switching frequency
• Thermal and overcurrent protection
• Battery protection mode
• USB control and monitoring
• USB serial converter mode for Kangaroo x2
• Configurable current limiting
• Custom user modes
• 12-bit motor outputs
• Input modes: analog, R/C, serial (plain text or packetized), USB
• Power outputs can act as voltage clamps, brakes, or be controllable
• Size: 2.75” x 3.5” x 1.0”    ||    70 x 90 x 25 mm

Specifications: 

• Weight: 19g / 0.7oz
• Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd,
  2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
• 5A continuous per channel, 10A peak
• Synchronous regenerative drive
• Ultra-sonic switching frequency
• Thermal and overcurrent protection
• Lithium protection mode 
• Input modes: Analog, R/C, simplified serial, packetized serial
• Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm

Features:

• Bi-directional control for two brushed DC motors.
• Support motor voltage ranges from 5V to 30VDC (Rev2.0).
• No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
• Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
• Support 3.3V and 5V logic level input (for PWM and DIR), compatible with Arduino and Raspberry Pi.
• Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
• Full NMOS H-Bridge for better efficiency and no heat sink is required.
• Regenerative Braking.
• Speed control PWM frequency up to 20KHz (output frequancy is same and input frequancy).
• Support both Locked-Antiphase and Sign-Magnitude PWM operation. ** Note this is not “RC PWM”
• 2 activation buttons for manual activation or fast test on each channel.
• Dimension: 84.5mm x 62mm

Please Note: If this material is not available in our stock, we will arrange & ship it in 3 working days if still we unable to proceed; we will refund 100% of your payment. 

• Operating voltage: DC 4.5V- DC 35V
• Output current: 0-5A
• Output power: 90W (max)
• Quiescent current: 7uA (standby)
• PWM duty cycle: 1% -100%
• PWM frequency: 20khz
• Size: 30mm x 26mm x 14mm

Specification

• ESP8266 WiFi Motor Drive Expansion Shield Board For NodeMCU ESP-12E
• Motor power supply (VM): 4.5V ~ 36V, can be powered separately
• Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
• Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must be 4.5V ~ 9V) while completing motor drive and control.
• Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
• Drive part of the work current Io: ≤1.2A

Specifications:

1. Supply Voltage: 6.8-30 VDC.
2. Continuous Current: 15 Amp.
3. PWM Frequency: 20 KHz.
4. Max Peak current: 30 Amp(For 10 Seconds).
5. One brushed DC motor Bidirectional control.