Specifications: 

• Weight: 19g / 0.7oz
• Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd,
  2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
• 5A continuous per channel, 10A peak
• Synchronous regenerative drive
• Ultra-sonic switching frequency
• Thermal and overcurrent protection
• Lithium protection mode 
• Input modes: Analog, R/C, simplified serial, packetized serial
• Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm

Specifications:

• Weight: 18g / 0.6oz
• Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
• 5A continuous per channel, 10A peak
• Synchronous regenerative drive
• Ultra-sonic switching frequency
• Thermal and overcurrent protection
• Lithium protection mode
• Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm
• 5″ / 13cm servo pigtails

Features:

• Bi-directional control for two brushed DC motors.
• Support motor voltage ranges from 5V to 30VDC (Rev2.0).
• No Reverse Polarity Protection at Vmotor, please double check the polarity before power up.
• Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
• Support 3.3V and 5V logic level input (for PWM and DIR), compatible with Arduino and Raspberry Pi.
• Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
• Full NMOS H-Bridge for better efficiency and no heat sink is required.
• Regenerative Braking.
• Speed control PWM frequency up to 20KHz (output frequancy is same and input frequancy).
• Support both Locked-Antiphase and Sign-Magnitude PWM operation. ** Note this is not “RC PWM”
• 2 activation buttons for manual activation or fast test on each channel.
• Dimension: 84.5mm x 62mm

Please Note: If this material is not available in our stock, we will arrange & ship it in 3 working days if still we unable to proceed; we will refund 100% of your payment.