Showing 73–90 of 123 results
Filter by price
Motor Drivers
High-Power 600W 10A 4V-60V MOS Tube FET Trigger Drive Module PWM Control High / Low Level Trigger Switch DC
₹472.00 (Inc. GST)₹400.00 (+18% GST Extra)
Specifications:
- Operating voltage: DC 4V – 60V
- Trigger source: high level trigger (DC3.0V – 24V), low level trigger (DC 0.0V ~ 0.6V), switch control, can connect MCU IO port, PLC interface, DC power supply, etc. PWM signal, support signal frequency range of 0 – 2.5KHZ
- Output capacity: DC 4V – 60V, continuous current 10A at room temperature, power 600W! Auxiliary cooling conditions, the current up to 15A
- Life: unlimited switch
- Working temperature: -40-85 °
- Size: 3.4 * 1.7 * 1.2cm
HobbyKing Red Brick 100A ESC 5V UBEC
₹3,538.82 (Inc. GST)₹2,999.00 (+18% GST Extra)
Specifications:
- Model Number: Red Brick ESC
- Product Material: Electronic component
- Product Color: Red
- Product Weight: Approx. 88g / 3.1oz
- Continuous Current: 100A
- UBEC Output: 5V / 5A
- Applicable : 2-7s Lithium /6-20 Ni-mh (not included)
- Application: For RC /FPV
Hobbywing Quicrun WP Brushed Electronic Speed Controller For Rock Crawlers ESC 80A
₹3,919.49 (+18% GST Extra)
Specifications:
- Input Voltage: 2-3S Lipo/5-9 Cell NiMH
- Cont./Peak Current: 80A/400A
- Power Rating Upto 80 Amps
- Battery Connector Type XT-60
- BEC Output: Switch Mode: 6V/7.4V@3A
- Battery Compatibility LiPo/NiMh
IC L293D
₹25.96 (Inc. GST)₹22.00 (+18% GST Extra)
Specifications:
- Supply Voltage Range 4.5V to 36V
- 600-mA Output current capability per driver
- Separate Input-logic supply
- It can drive small DC-geared motors, bipolar stepper motor.
- Pulsed Current 1.2-A Per Driver
- Thermal Shutdown
- Internal ESD Protection
- High-Noise-Immunity Inputs
JK2M2283 2 Phase 150V-220V AC 8A 110mm 130mm NEMA42/52 Motor StepperEngine Driver
₹12,390.00 (Inc. GST)₹10,500.00 (+18% GST Extra)
Specifications:
- Current: 2.0A – 8.3A
- Voltage: 150VAC – 220VAC
- Matched Models: Nema42-52 Stepping Motor
- Industrial Grade
JKBLD120 Brushless DC Motor Driver
₹2,878.99 (Inc. GST)₹2,439.83 (+18% GST Extra)
Specifications:
- Environment temperature : -10℃- 50℃
- Input voltage : +12~+30V DC
- output Current: 30A(<3s) Rated speed 8A, Maximum Current moment 30A(<3S)
- Suitable motor speed : 0-20000rpm
- Hall sensor voltage : 4.5V-6.5V
- External Potentiometer: 10KΩ
- Support Motor: Brushless DC Motor less of 120w
JKBLD300 Brushless DC Motor Driver
₹3,835.00 (Inc. GST)₹3,250.00 (+18% GST Extra)
Specifications:
- Brand Name: Jkongmotor
- Model Name: JKBLD300
- Type: BLDC motor driver
- Power: 300W
- Environment temperature: -10℃—50℃
- Input Voltage: +18—+50VDC
- Output Current: 15A—35A
- Suitable Motor Speed: 0-20000Rpm
- Hall Sensor Voltage: 4.5V—5.5V
- External Potentiometer: 10kΩ
- Support Motor: Brushless DC Motor less of 300w
JKBLD750 Brushless DC Motor Driver
₹7,375.00 (Inc. GST)₹6,250.00 (+18% GST Extra)
Specifications:
- DC Power Input: 24V -48V
- Rated Current: 25Aamp
- Max Current: 45Amp
- Hall Sensor angle: 120°/240°
JKD2060H Stepper Motor Driver
₹5,310.00 (Inc. GST)₹4,500.00 (+18% GST Extra)
Features:
1、 High-performance, low price
2、 micro-step
3、 Automatic idle-current reduction
4、Optical isolating signals I/O
5、 Max response frequency up to 200Kpps
6、 Low temperature rise, smooth motion
7、Online adaptive PID technology
JKD5056S Stepper Motor Driver
₹2,950.00 (Inc. GST)₹2,500.00 (+18% GST Extra)
Specifications:
- Support Motor: Nema 23 Stepper Motor / Nema 24 Stepper Motor / Nema 34 Stepper Motor
- Current Output: 5A
- Input Power Supply: 24V – 50V
Kangaroo X2 Motion Controller
₹1,878.99 (Inc. GST)₹1,592.37 (+18% GST Extra)
Specifications:
- 2 channel self-tuning PID controller
- Position or speed control
- Quadrature encoder feedback or potentiometer feedback
- 80,000 pulses/sec processing
- Support for limit switches and mechanical stops
- Analog, R/C and serial inputs
Please Note: If this material is not available in our stock, we will arrange & ship it in 3 working days if still we unable to proceed; we will refund 100% of your payment.
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
₹149.86 (Inc. GST)₹127.00 (+18% GST Extra)
Specification
- ESP8266 WiFi Motor Drive Expansion Shield Board For NodeMCU ESP-12E
- Motor power supply (VM): 4.5V ~ 36V, can be powered separately
- Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
- Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must be 4.5V ~ 9V) while completing motor drive and control.
- Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
- Drive part of the work current Io: ≤1.2A
L293D Motor Driver Module 4.5-25V
₹119.01 (Inc. GST)₹100.85 (+18% GST Extra)
Specifications:
- Driver Model: L293D
- Operating Voltage (VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
- Polarity Protection: NO
- Cooling Fan: NO
- Arduino Sheild: No- can be used with a Wire connection
- Dimensions in mm (LxWxH): 40 x 30 x 14
- Weight (gm): 15
L293D Motor Driver/Servo Shield for Arduino
₹128.62 (Inc. GST)₹109.00 (+18% GST Extra)
Specifications:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
₹198.94 (Inc. GST)₹168.60 (+18% GST Extra)
Specifications:
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
L298N Motor Driver Module
₹143.01 (Inc. GST)₹121.19 (+18% GST Extra)
Specifications:
- Logical voltage: 5V
- Drive voltage: 5V-35V
- Logical current: 0-36mA
- Drive current: 2A (max. single bridge)
- Max power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
L9110 L9110S DC Stepper Motor Driver Board HBridge
₹92.04 (Inc. GST)₹78.00 (+18% GST Extra)
Specifications:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
L9110S DC Stepper Motor Driver Board
₹90.86 (Inc. GST)₹77.00 (+18% GST Extra)
Features:
- L9110S-chip motor drive
- Supply voltage: 2.5-12V
- The maximum operating current of 0.8A
- Drive two DC motors or a 4-wire 2-phase stepping motor.
- Ultra-small size, suitable for assembly