Showing 97–120 of 286 results
GPS NEO-7M Satellite Positioning Module Development Board for Arduino STM32 51
GPS Tracking Device Remote Recording Human Mini GPS Tracker GF-07
GSM 3dBi Magnetic Mount Spring Antenna
Specifications:
- Frequency: 2400 – 2500MHz
- Operational Temperature: -30° to 60° C
- Gain: 3 dBi
- Impedance (Ω): 50
- Connector: SMA- Male
- VSWR :< 2.0
- wire length: 3 meter
GSM 3DBI Sticker Antenna (Patch Antenna) 3M cable
GSM DBI Rubber Duck Antenna 60mm
GSM DBI Rubber Duck Antenna L Type
GSM GPRS 3G Quad-Band Antenna – Helix
GSM GPRS SIM808 Module SMS Chip Development Board
- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- GPRS mobile station class B
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Supports charging control for Li-Ion battery
- Supports Real-Time Clock
- Integrated GPS/CNSS and supports A-GPS
- Low power consumption, 10mA in sleep mode
HC-05 4pin Bluetooth Module(Master/Slave) with Button
HC-05 6pin Bluetooth Module with Button
HC-05 Bluetooth Transceiver – SMD module
Specifications:
- Working current: matching for 30 mA, matching the communication for 8 mA.
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth's protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
- Security: Authentication and encryption.
HC-06 4pin Bluetooth Module (Slave) No Button
HC-08 4pin Bluetooth Module without Button
HC-08 Bluetooth 4.0BLE Serial Port Module
HC-12 SI4463 Wireless Serial Module
Specifications:
- Frequency range : 119–1050 MHz
- Receive sensitivity : –126 dBm
- Serial TTL (RX, TX, GND) interface
- Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK
- Max output power : +20 dBm
- Low active power consumption: 10/13 mA RX, 18 mA TX at +10 dBm
- Ultra low current powerdown modes: 30 nA shutdown, 50 nA standby
- Data rate: 100 bps to 1 Mbps
- Fast wake and hop times
- Highly configurable packet handler
- TX and RX 64 byte FIFOs
- Auto frequency control (AFC)
- Automatic gain control (AGC)
- Low BOM
- Low battery detector
- FCC Part 90 Mask D, FCC part 15.247, 15,231, 15,249, ARIB T-108, T-96, T-67, RCR STD-30, China regulatory
- ETSI Class-I Operation with SAW
HC-42 6pin Bluetooth 5.0BLE Serial Port Module
HLKRM04-5.5V 32Mb RAM 8Mb Flash UART Serial-Ethernet-WiFi Wireless Module
Specifications:
- Brand: Hi-Link
- Network standard: wireless IEEE 802.11n, IEEE 802.11g,IEEE 802.11b wired IEEE 802.3, IEEE 802.3u
- Wireless transmission rate: 11n: maximum up to 150Mbps, 11g: maximum up to 54Mbps, 11b: maximum up to 11Mbps
- Track numbers: 1-14
- Frequency range: 2.4-2.4835G
- Emission power: 12-15DBM
- WIFI work mode: Client/AP/Router
- WDS Function:Support WDS wireless bridge connection
- Wireless security: Wireless MAC address filtering, Wireless security function switch, 64/128/152 bit WEP encryption, WPA-PSK/WPA2-PSK,WPA/WPA2 security mechanism
- Network management: Remote Web management, Configuration file import and export, WEB software upgrade
- Operating temperature: -20-70C
- TCP/UDP connection: Max connection number>20
- Operating humidity: 10%-90%RH
- Serial baud rate: 50~230400bps
- Storage temperature: -40-80C
- Storage humidity: 5%-90%RH
HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module
Specification :Â
- BT Version: Bluetooth Specification V4.0 BLE
- Send and receive no bytes limit.
- Working frequency: 2.4GHz ISM band
- Modulation method: GFSK(Gaussian Frequency Shift Keying)
- RF Power: -23dbm, -6dbm, 0dbm, 6dbm, can modify through AT Command AT+POWE.
- Speed: Asynchronous: 6K Bytes
- Synchronous: 6K Bytes
- Security: Authentication and encryption
- Service: Central & Peripheral UUID FFE0,FFE1
- Power: +3.3VDC 50mA
- Long range: Open space have 100 Meters with iphone4s
- Power: In sleep mode 400uA~1 .5mA, Active mode 8.5mA.
- Working temperature:–5 ~ +65 Centigrade
- Size: HM-10 26.9mm x 1 3mm x 2.2 mm;
iBeacon Module Bluetooth 4.0 BLE Near-Field Positioning Sensor For Android & Apple
Specifications:
- BT Version: Bluetooth V4.0 BLE
- Send and receive no bytes limit.
- Working frequency: 2.4GHz ISM band
- Modulation method: GFSK(Gaussian Frequency Shift Keying)
- RF Power: -23dbm, -6dbm, 0dbm, 6dbm, can modify through AT
- Command AT+POWE.
- Speed: Asynchronous: 6K Bytes
- Synchronous: 6K Bytes
- Security: Authentication and encryption
- Service: Central & Peripheral UUID FFE0,FFE1
- Power: +3.3VDC 50mA
- Long range: Open space have 30 Meters
- Power: In sleep mode 400uA -1.5mA, Active mode 8.5mA.
- Working temperature: –5 -65℃
- Size: 24.8 x 24.8 x 7.5mm
- Battery type: CR2032 (NOTE: he battery not included)
