Showing 1–24 of 37 results
0.28 inch 0-100V Three Wire DC Voltmeter Red
₹110.92 (Inc. GST)₹94.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: RED
- Current Consumption : 10mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 3 V (but not measure accurately up to 3.6V).
- Operating Temperature (°C) : -10 to 60
- Holes for Mounting : 3mm
- Minimum Input (V) : 3
0.28inch Red 3.5-30V Two Wire DC Voltmeter
Original price was: ₹167.56.₹87.01Current price is: ₹87.01. (Inc. GST)₹73.73 (+18% GST Extra)
Specifications:
- Operating Voltage: 3.5-30 VDC
- It is a 2-wire display.
- LED Color: RED
- Current Consumption : < 15 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 2.5 V.(but not measure accurately up to 3.6V).
100A Current Sensor SCT013 Non-Invasive Ac Current Split Core Type Clamp Meter Sensor
₹689.00 (Inc. GST)₹583.90 (+18% GST Extra)
Specifications:
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board
₹124.99 (Inc. GST)₹105.93 (+18% GST Extra)
Specifications:
- Current Input support 4-20Ma & 0-20mA
- voltage output support 0-3.3V 0-5V 0-10V
- Wide supply voltage range, the output has multiple voltage ranges
- High stability, good linearity, industrial grade
5A 12V Overcurrent Protection AC Current Detection Sensor Module
₹285.99 (Inc. GST)₹242.37 (+18% GST Extra)
Overview:
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
5A Range of Single Phase AC Current Sensor Module
₹100.30 (Inc. GST)₹85.00 (+18% GST Extra)
Specifications:
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
Acrylic Case for DSO138 Oscilloscope
₹198.24 (Inc. GST)₹168.00 (+18% GST Extra)
Specifications:
- Ideal for DSO138 Oscilloscope.
- Light-weight.
- Clear cas
ACS712 20AMP Ac/DC Current Sensor
₹106.20 (Inc. GST)₹90.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -20A ~ 20A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
ACS712 30AMP Ac/DC Current Sensor
₹138.06 (Inc. GST)₹117.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -30A ~ 30A
- Sensitivity: 100mV/A
- Low-noise analog signal path.
- Power-On Time: 35us
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
ACS712 5AMP Ac/DC Current Sensor
₹108.99 (Inc. GST)₹92.37 (+18% GST Extra)
Specifications:
- Supply Voltage: 4.5V ~ 5.5V DC
- Measure Current Range: -5A ~ 5A
- Sensitivity: 180mV/A ~190mV/A, Typical: 185mV/A
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
₹200.60 (Inc. GST)₹170.00 (+18% GST Extra)
Features:
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
Current (4-20mA) to Voltage (0-15V) Converter Module Isolation Transmitter Signal Converter
₹1,100.00 (Inc. GST)₹932.20 (+18% GST Extra)
Specifications:
- Power supply voltage: DC 12V~24V.
- Output voltage signal: 0~15V.
- Input current: 4-20mA
DC 100V 100A Voltmeter Ammeter Without Shunt
₹619.50 (Inc. GST)₹525.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 5V DC
- Current Consumption: <60mA
- Testing Voltage: 0-100V
- Testing Current: 1-100A
- Easy to read even in dim light
DC Voltage Sensor 0V to 25V
₹41.30 (Inc. GST)₹35.00 (+18% GST Extra)
Specifications:
- Input Voltage: 0 to 25V
- Voltage Detection Range: 0.02445 to 25
- Analog Voltage Resolution: 0.00489V
- Needs no external components
- Easy to use with Microcontrollers
- Small, cheap and easily available
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
₹2,124.00 (Inc. GST)₹1,800.00 (+18% GST Extra)
Specifications :
- Input Supply Voltage (VDC) – 9
- Impedance (Ω) – 1MΩ
- Maximum Real-time Sampling Rate -1MspsSampling Buffer Depth – 1024 bytes
- Analog Bandwidth – 0-200KHz
- Vertical Sensitivity – 10mV / Div – 5V / Div (1-2-5 progressive manner)
- Accuracy – 12Bit
- Coupling Modes- DC / AC / GND
- The Horizontal Time Base Range – 10μs / Div – 50s / Div (1-2-5 progressive manner)
Dual Led 0.28 ” Display for DC0-100V Voltage and Current Test Digital Instrument Digital Meter Panel Amplifier Red Blue 10A
Original price was: ₹212.40.₹116.99Current price is: ₹116.99. (Inc. GST)₹99.15 (+18% GST Extra)
Specification:
- Voltage supply range: 4.5V to 24V
- Voltage measurement range: 0-100V
- Current measurement range: 0-10A
- Voltage error: ±0.1%
- Current error: ±1%
- Working temperature: -10℃ to 65℃
GY-471 MAX471 3A Range Current Sensor Module
₹295.00 (Inc. GST)₹250.00 (+18% GST Extra)
Specifiactions:-
- Complete High-Side Current Sensing
- Precision Internal Sense Resistor (MAX471)
- 2% Accuracy Over Temperature
- Monitors Both Charge and Discharge
- 3A Sense Capability with Internal Sense Resistor (MAX471)
- Higher Current-Sense Capability with External Sense Resistor (MAX472)
- 100µA Max Supply Current
- 18µA Max Shutdown Mode
- 3V to 36V Supply Operation
- 8-Pin DIP/SO Packages
High Precision Amplifier for Instrument MV Millivolt Differential (10 times) Amplifier
₹1,495.66 (Inc. GST)₹1,267.50 (+18% GST Extra)
Specifications:
- S+ & S- are source MV signal that needs to be amplified.
- E+ & E- Terminals are Voltage Output Terminals to source.
- 413 reference Chip output provide 4V/5M Power Supply.
- DC-DC Power Conversion
High Precision Amplifier for Instrument MV Millivolt Differential (100times) Amplifier
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- S+ & S- are source MV signal that needs to be amplified.
- E+ & E- Terminals are Voltage Output Terminals to source.
- 413 reference Chip output provide 4V/5M Power Supply.
- DC-DC Power Conversion
High Precision Amplifier for Instrument MV Millivolt Differential (20times) Amplifier
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- S+ & S- are source MV signal that needs to be amplified.
- E+ & E- Terminals are Voltage Output Terminals to source.
- 413 reference Chip output provide 4V/5M Power Supply.
- DC-DC Power Conversion
High Precision Amplifier for Instrument MV Millivolt Differential (500times) Amplifier
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- S+ & S- are source MV signal that needs to be amplified.
- E+ & E- Terminals are Voltage Output Terminals to source.
- 413 reference Chip output provide 4V/5M Power Supply.
- DC-DC Power Conversion
High Precision Amplifier for Instrument MV Millivolt Differential (50times) Amplifier
₹649.00 (Inc. GST)₹550.00 (+18% GST Extra)
Specifications:
- S+ & S- are source MV signal that needs to be amplified.
- E+ & E- Terminals are Voltage Output Terminals to source.
- 413 reference Chip output provide 4V/5M Power Supply.
- DC-DC Power Conversion
HWCT004 Micro Precision Current Transformer 50A / 50MA DIY Sensor SR006
₹265.50 (Inc. GST)₹225.00 (+18% GST Extra)
Specifications:
- Input: 50A
- Output: 50MA
- Load: 100 Ω
- ratio error: 0.1%
- Phase difference: < 20 ‘
- The linear range: 5%-120%
- Dielectric strength: 1000M Ω /500V/min
- Operating temperature: -25 -+75 centigrade
- Storage temperature: -40 -+80 centigrade
- Case Material: flame retardant PBT/environmentally friendly flame retardant ABS
I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module
₹289.98 (Inc. GST)₹245.74 (+18% GST Extra)
Specifications:
- Power supply : 2.7V to 5.5V
- Power current consumption is 350 μ (typically)
- Sensing Voltage varies from : 0V to +26V
- Working temperature : – 40 ° C to + 125 ° C