5A 12V Overcurrent Protection AC Current Detection Sensor Module
₹448.40 (Including GST)
₹380.00 ( + ₹68.40 GST)
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
In stock (can be backordered)
LC 5A 12V Overcurrent Protection AC Current Detection Sensor Module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM; NC, NO three ports to control the external circuit on and off, in order to achieve over-current protection.
- Current detection resolution can change the parameter of resistance parameters;
- Output over-current switching signal output;
- The over-current signal setting the critical point adjustable.
- Measured the wire through the current transformer, connect VCC and GND to the DC12V power supply;
- Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on; is connected to the relay means activated), then reduce or cut off the current flowing that through the tested wire; if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected; is connected to the relay means it release);
- When reduce or cut off the current flowing through the wire; the relay is not released, will still need to continue to adjust the potentiometer to find the over-current protection point.
|Operating frequency range||20Hz ~ 400Hz|
|Output mode||Switch signal output|
|Maximum detection wire diameter||5.2mm|
|Mounting hole: hole diameter is 3mm, hole distance||52.5mm|
|Operating environment||-40 ??~ +85 ??/span>|
|The current detection range||AC0.3A-5A|
|Dimensions (LxWxH)mm||38 * 44 x 12|
1 x 5A 12V Overcurrent Protection AC Current Detection Sensor Module.
Only logged in customers who have purchased this product may leave a review.