FORCE / FLEX AND PRESSURE

• Operating  voltage of FLEX SENSOR: 0-5V
• Can operate on LOW voltages
• Power rating : 0.5Watt (continuous), 1 Watt (peak)
• Life: 1 million
• Operating temperature: -45ºC to +80ºC
• Flat Resistance: 25K Ω
• Resistance Tolerance: ±30%
• Bend Resistance Range: 45K to 125K Ohms(depending on bend)
• Compatiable with  Arduino 

• Operating  voltage of FLEX SENSOR: 0-5V
• Can operate on LOW voltages
• Power rating : 0.5Watt (continuous), 1 Watt (peak)
• Life: 1 million
• Operating temperature: -45ºC to +80ºC
• Flat Resistance: 25K Ω
• Resistance Tolerance: ±30%
• Bend Resistance Range: 45K to 125K Ohms(depending on bend)
• Compatiable with  Arduino 

• Vin: 3 to 5VDC
• Logic: 3 to 5V compliant
• Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
• Up to 0.03hPa / 0.25m resolution
• -40 to +85°C operational range, +-2°C temperature accuracy
• This board/chip uses I2C 7-bit address 0x77.
• Compatible with Andriod Board.

• Operating Pressure: 300...1100 hPa
• Operating Temperature: -40…85°C
• Absolute accuracy: ~ ±1 hPa
• Operating Voltage: 1.71V to 3.6V
• Peak current: 1.12mA.
• Interface: I²C and SPI

1. Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
2. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
3. Peak current: 1.12mA.
4. Operating Pressure: 300 hPa to 1100 hPa.
5. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.

• Diameter: 15mm
• Measurement Range: Typically specified in units such as Newtons (N) or pounds-force (lbf)
• Sensitivity: The change in electrical output per unit change in force applied (e.g., mV/N)
• Accuracy: The degree of conformity between the measured value and the actual value
• Resolution: The smallest change in force that the sensor can detect
• Linearity: How well the sensor's output follows a straight line in response to changes in force
• Response Time: The time taken by the sensor to respond to changes in force
• Operating Temperature Range: The range of temperatures within which the sensor can operate effectively
• Operating Voltage: The voltage required to power the sensor
• Output Signal: The type of electrical signal generated by the sensor (e.g., voltage, current, digital)
• Material: The material used for the sensing element and housing, which may affect durability and compatibility with different environments
• Protection Rating: Degree of protection against dust, water, and other environmental factors (e.g., IP65)
• Mounting Options: Different ways the sensor can be mounted or installed in a system
• Compliance: Standards or regulations the sensor complies with (e.g., CE, RoHS)
• Cable Length: Length of the cable attached to the sensor for connectivity purposes

• Actuation force as low as 0.2N
• Sensitivity range up to 20N
• Cost effective
• Ultra thin
• Life: 10 million
• Simple and easy to integrate
• Operating temperature: -40ºC to +85ºC
• Non actuated  Resistance: 10M Ω
• Device rise time: < 3 Micro second
• Bend Resistance Range: 100K to 1K Ohms(depending on force)

Specifications :

1. Adopts Precision Compensation Technology
2. High Accuracy Sensor
3. Suitable For Gas,Liquid,Oil
4. Stainless Steel Body