Showing 460–468 of 670 results
Filter by price
Sensors
Photosensitive Resistor Sensor Module for Arduino
₹48.38 (Inc. GST)₹41.00 (+18% GST Extra)
Features:
- The photosensitive device, its photocurrent increases with the applied voltage.
- the temperature coefficient. Photoelectric effect photoresistor influenced by temperature, partial photoresistor optoelectronic at low temperatures
- Higher sensitivity, whereas the sensitivity at high temperatures, are lower.
- rated power. Refers to the rated power for a certain line photoresistor allowed power consumed when the temperature rises.
- High, its power consumption is reduced.
- According to the spectral characteristics of the photoresistor has three photoresistors: Ultraviolet photosensitive resistance, infrared light-sensitive resistors, Visible photosensitive resistance.
Piezoelectric / Audio / Pressure transducer 27mm Dia Audio (2 Pieces)
₹25.00 (+18% GST Extra)
 Specification:
- Round shape brass
- Clear Sound.
- High sound pressure
- Diameter: 27mm
- Resonant Frequency : 6.5kHz
Piezoelectric / Audio / Pressure transducer 35mm Dia (2 Pieces)
₹47.20 (Inc. GST)₹40.00 (+18% GST Extra)
Specifications:
- Round shape brass
- Clear Sound.
- High sound pressure
- Diameter: 35mm
- Resonant Frequency : 6.5kHz
PIR Sensor Module HC-SR501
₹76.70 (Inc. GST)₹65.00 (+18% GST Extra)
Specifications:
- Wide range of input voltage varying from 4.V to 12V (+5V recommended)
- The output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operate modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
- Compatible with Arduino & Raspberry pi
PIR Sensor Module HC-SR501
₹62.00 (Inc. GST)₹52.54 (+18% GST Extra)
Specifications:
- Wide range of input voltage varying from 4.V to 12V (+5V recommended)
- The output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operate modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
- Compatible with Arduino & Raspberry pi
PM-K45 PANASONIC Limit Switch SENSOR
₹784.70 (Inc. GST)₹665.00 (+18% GST Extra)
Specifications :
- Series : PM45
- : 6mm
- : 5 to 24VDC
- : < 15mA
- : –25 to +55 °C
PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor
₹448.40 (Inc. GST)₹380.00 (+18% GST Extra)
Features:
- Power supply voltage: DC5 ± 2V
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library
₹399.00 (Inc. GST)₹338.14 (+18% GST Extra)
Specifications:
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI, and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of the last version
- Built-in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as an RFID reader/writer
- Work as a 1443-A card or a virtual card
- Compatible with Arduino Board.
PNP GX-F12A-P Panasonic Inductive Proximity Sensor
₹1,829.00 (Inc. GST)₹1,550.00 (+18% GST Extra)
Specifications :
- Model :GX-F12
- Sensor Type : Inductive
- Sensing Distance :0.13″ (3.3mm)
- Output Type : PNP-NO, 3-Wire
- Response Frequency :500Hz
- Material – Plastic
- Voltage – 12V ~ 24V
- Termination Style :Cable Leads
- Operating Temperature :-25°C ~ 70°C
- Ingress Protection :IP68
- Indicator :LED