Telephone Enquiry: +91 83296 49598/ 93227 63532


More Categories Less Categories


PIR Sensor Module HC-SR501

69.62 (Including GST)

59.00 ( + 10.62 GST)


  1. Make- D-Sun
  2. Wide Working Voltage Range: DC 4.5V- 20V
  3. Current Drain: <60uA
  4. Detection Angle: <140°
  5. Detection Distance: 3 to 7m (can be adjusted)
  6. Blockade time: 2.5s (Default)
  7.  Work temperature: -20-+80°C

In stock (can be backordered)

Purchase this product now and earn 1 Point!

SKU: RDNA-K5.2 Category:

Share this product


The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection Jumper is also available. Compatible with Arduino, raspberry pi, AVR, PIC 8051, etc.


  1. Infrared Sensor with Control Circuit Board
  2. The Sensitivity and Holding Time Can be Adjusted
  3. Blockade time: 2.5s (Default)
  4. Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
  5. Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.