Showing 1–9 of 28 results
6 Pin Universal Gas Sensor Socket
CCS811 Carbon Monoxide Gas Sensor
Compact Optical Dust Sensor module – GP2Y1010AU0
DFRobot Fermion MEMS CH4 Sensor Gas Detection Sensor.
Specifications :
- Gas Detected: Methane (CH4)
- Detection Range: Typically 200 to 10000 ppm (parts per million) CH4
- Sensitivity: High sensitivity with a low detection limit
- Operating Voltage: 5V DC
- Output Signal Type: Analog voltage output
- Analog Output Voltage Range: 0-5V (corresponding to the detected CH4 concentration)
- Warm-up Time: <1 minute
- Response Time: <10 seconds (typical)
- Operating Temperature: -20°C to 50°C (-4°F to 122°F)
- Storage Temperature: -20°C to 70°C (-4°F to 158°F)
- Humidity: 15% to 90% RH (non-condensing)
- Dimensions: Compact size, suitable for integration into various applications
- Interface: Analog output for easy integration with microcontrollers and data acquisition systems
- Power Consumption: Low power consumption for extended operation and battery-powered applications
- Accuracy: High accuracy in methane gas detection
- Certifications: CE certified
DFRobot Fermion MEMS Hydrogen Sulfide H2S Gas Detection Sensor (Breakout, 0.5-50ppm)
DFRobot Fermion MEMS Odor Sensor Gas Detection Sensor.
Specifications :
- Gas detected:Â EtOH and smoke
- Detection range: 10–1000 ppm
- Operating voltage: 3.3–5 V
- Operating current:Â <20 mA
- Output signal:Â Analog voltage
- Load resistance (RL): 4.7 KΩ
- Sensitivity: R0 (in air)/Rs (in 200 ppm EtOH) ≥ 3
- Operating temperature: -10–50°C
- Operating humidity: 15–90% RH (non-condensing)
- Lifespan: ≥5 years (in air)
- Dimension: 13 × 13 × 2.5 mm/0.0.51 × 0.51 × 0.1 inÂ
Grove Dust Sensor Air Quality
Specifications:
- Model :PPD42NS
- Detectable particle size approx. :1μm (minimum.)
- Detectable range of concentration: 0~28,000 pcs/liter (0~8,000pcs/0.01 CF=283ml)
- Supply Voltage: DC5V +/- 10% (CN1:Pin1=GND, Pin3=+5V)
- Ripple Voltage within 30mV
- Operating Temperature Range 0~45°C
- Operating Humidity Range :95%rh or less (without dew condensation)
- Power consumption :90mA
- Storage temperature: -30~60°C
- Time for stabilization :1 minute after power turned on
- Output Method Negative: Logic, Digital output,
- Hi : over 4.0V(Rev.2) Lo : under 0.7V (As Input impedance : 200kΩ) OP-Amp output, Pull-up resistor : 10kΩ
MQ-131 Ozone Gas Sensor
Features:
- with the signal light indicates the output
- the dual signal output (analog output, and TTL-level output)
- TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
- the analog output increases with the concentration, the higher the voltage the higher the concentration
- the ozone gas with high sensitivity (detection concentration range 10PPB-2PPM Ozone)
- with a long life and reliable stability
- Fast response characteristics
- with mounting holes to facilitate fixed installation
- the probe can plug design for easy testing.
MQ-135 Module (Ammonia, Sulphide and Benzene Gas Sensor)
Specifications:
- Wide detecting scope
- Fast response and High sensitivity
- Stable and long life
- Operating Voltage is +5V
- Detect/Measure NH3, NOx, alcohol, Benzene, smoke, CO2, etc.
- Analog output voltage: 0V to 5V
- Digital output voltage: 0V or 5V (TTL Logic)
- Preheat duration 20 seconds
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer