Showing all 18 results
Filter by price
Flight Controllers
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
₹148.31 (+18% GST Extra)
Specifications:
- Color: Black
- Material: Glass fiber
- Suit for different open-source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight:Â 24 gm.
APM 2.8 Flight Controller with Built in Compass
₹6,643.40 (Inc. GST)₹5,630.00 (+18% GST Extra)
Specifications :
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
CC3D OpenPilot EVO Flight Controller with Side Pins
₹1,090.32 (Inc. GST)₹924.00 (+18% GST Extra)
Specifications :
- with a function of being directly plugged into the satellite receiver(It needn’t conversion cable)
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller
₹199.00 (Inc. GST)₹168.64 (+18% GST Extra)
Specifications:
- Color: Black
- Material: Plastic and Rubber
- Weight: 15 gm
- Suit for different open source CC3D flight controller, Naze32, Mini APM or other mini flight control
DJI NAZA-M Lite V1.1 with GPS Kit
₹10,509.08 (Inc. GST)₹8,906.00 (+18% GST Extra)
Specifications :
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
₹1,404.20 (Inc. GST)₹1,190.00 (+18% GST Extra)
Specifications:
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver
₹5,948.38 (Inc. GST)₹5,041.00 (+18% GST Extra)
- FS-i6S Transmitter:Â
- No. of Channel: 10
- Frequency Range: 2.4055 – 2.475GHz
- Band Width: 500KHz
- Band Number: 140
- Transmitting Power: <20dbm
- 2.4G Mode:Â AFHDS 2A
- Modulation System: GFSK
- FS-iA10B Receiver:
- No. of Channel: 10
- Frequency Range: 2.4055 – 2.475GHz
- Band Number: 140
- Receiver Sensitivity: -105dbm
- 2.4G Mode:Â AFHDS 2A
- Modulation System: GFSK
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
₹5,970.80 (Inc. GST)₹5,060.00 (+18% GST Extra)
Specifications :
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU Inven Sense Inc.
- Input voltage: 4.8V-6.0V.
- AVR interface: Standard 6 Pin.
- The signal from receiver: 1520us(5 channels).
- Signal to ESC: 1520us.
Naze32 6DOF Flight Control board
₹1,239.00 (Inc. GST)₹1,050.00 (+18% GST Extra)
Specifications:
- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.
OMNIBUS F4 V2 PRO Flight Controller with SD Card Slot & BEC
₹4,395.50 (Inc. GST)₹3,725.00 (+18% GST Extra)
- Dimensions: 37 x 37 x 10 mm(L x H x W)
- Weight: 12 gm.
- SPI Gyro MPU6000
- MicroSD Blackbox
- F4 Processor (F405)
- 5v3a SBEC
- Built-in Current Sensor
- On-Board OSD (controlled by Beta flight, FC over SPI bus)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
- On-Board Voltage Regulator and Power supply (BEC)
PDB-XT60 with BEC 5V and 12V
₹328.99 (Inc. GST)₹278.81 (+18% GST Extra)
Specifications:
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- 5V and 12V Output LED indicators
- Regulated 5V and 12V outputs
- BEC 5V output:Â 5V/2A (Max.2.5A 10s/minute)
- Output Ripple:Â 40mV (VIn= 16V, VOut= 5V@2A load)
- Short-circuit tolerant:Â 5 seconds/minute
- BEC 12V output (4S LiPoly, 13~18V DC):Â 12V/500mA (Max.0.8A 5s/minute)
- BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
PIXHAWK 2.4.8 Combo Kit
₹14,950.60 (Inc. GST)₹12,670.00 (+18% GST Extra)
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
Pixhawk I2C Port Expand Board with Cable
₹198.24 (Inc. GST)₹168.00 (+18% GST Extra)
Specifications:
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 5g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
Pixhawk Passive Buzzer and Switch
₹619.50 (Inc. GST)₹525.00 (+18% GST Extra)
Features:
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Adopts E-Switch red light switch.
- Length: 250mm .
- Switch mounting hole diameter 8mm.
- The same version with 3DR official version.
SP RACING F3 FLIGHT CONTROLLER ACRO VERSION
₹2,124.00 (Inc. GST)₹1,800.00 (+18% GST Extra)
Specification :
- CPU model : STM32F303
- Main MPU : MPU6050
- Barometer : Barometer
- Compass : NO
- PWM outputs : 8
- No. of UARTs : 3
- RSSI analog input : YES
- I2C input : YES
- Buzzer output : YES
- VBAT input : Yes-up to 4S (17v)
- LED strip output : YES
- Current sensor analog input : YES
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhau 2.4.6/2.4.8
₹1,499.00 (Inc. GST)₹1,270.34 (+18% GST Extra)
Features :
- Locate performance
- These are Pre-configured, flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 5 pin connectors for EZ connect to MEGA BLACK
- 4 pin connectors for only GPS use
- 4 pin connectors for compass only use
- Can use both 4 pin at once.
Ublox NEO 7M GPS With Compass for Pixhawk 2.4.6/2.4.8
₹1,398.99 (Inc. GST)₹1,185.59 (+18% GST Extra)
Features :
- Locate performance
- These are Pre-configured, flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 6 pin connectors for EZ connect to MEGA BLACK
- 4 pin connectors for only GPS use
- 4 pin connectors for compass only use
- Can use both 4 pin at once.
Universal GPS Folding Antenna Base Set
₹260.78 (Inc. GST)₹221.00 (+18% GST Extra)
Features:
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter:Â 4mm
- Lead of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
- Colour:Â Anodised black