Filter by price
Motor Drivers & Relays
SSR-80VA 24-380V Solid State Voltage Regulator
₹518.00 (Inc. GST)₹438.98 (+18% GST Extra)
Specification:
- Dielectric Strength: Over 2.5kVA / 1 min
- Trigger resistance: 470-560KΩ
- Switching Voltage (VAC):24-380
- Operating Temperature Range (C):-20 to 85
- Material: ABS
Standard 30A ESC Yellow with connectors
₹429.00 (Inc. GST)₹363.56 (+18% GST Extra)
Specification:
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S Li-Po.
- Application: BLDC Motors, Multirotor, Rc Planes etc.
T91-1C-12VDC electromagnetic relay
₹82.60 (Inc. GST)₹70.00 (+18% GST Extra)
- T91 Type Relay
- Coil Voltage: 12V DC
- Contact Rating: 30A @ 250V AC / 28V DC
- Model No: JQX-16F(T91)-1Z
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
₹864.94 (Inc. GST)₹733.00 (+18% GST Extra)
Specifications:
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10~45℃
- H bridge bipolar constant current drive.
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
₹948.72 (Inc. GST)₹804.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
TB6600 Stepper Motor Drivers 4A 9-42V Micro Step CNC 1 Axis
₹269.00 (+18% GST Extra)
Specifications:
- DC 9-42V power supply, 12-24V power supply the best
- Control signal input voltage 3.3-24VÂ
- Segmentation accuracy 1-32 subdivision optional
- Output peak current 4.0A
- Input signal high-speed optocoupler isolation
- Built-in temperature protection and over-current protection
- Automatic half-flow to reduce heat
TB6612FNG V1.0.0 WeMos D1 Mini I2C Dual Motor Drive Module
₹689.00 (Inc. GST)₹583.90 (+18% GST Extra)
 Specifications :
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.
- Recommended motor voltage (VMOT): 4.5 V to 13.5 V (can operate down to 2.5 V with derated performance).
- CW/CCW/short break/stop motor control modes
- Logic voltage (VCC): 2.7 V to 5.5 V
- Output current maximum: 3.2 A peak per channel.
- Output current continuous: 1.2 A per channel (can be paralleled to deliver 2 A continuous).
- Maximum PWM frequency: 100 kHz
- Built-in thermal shutdown circuit
- Filtering capacitors on both supply lines.
- Reverse-power protection on the motor supply.
Thermal Sensor Relay Module
₹298.54 (Inc. GST)₹253.00 (+18% GST Extra)
Specifications:
- Supply voltage: 5VDC
- Current: greater than 150mA
- Load: 250V 10A AC or 30V 10A DC