Showing 91–108 of 123 results
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver
₹368.99 (Inc. GST)₹312.71 (+18% GST Extra)
Specifications:
- Input Power: Through PC USB port or 12-24V power supply
- Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
- Driver type: Pulse and Direction signal control
- Weight (gm): 78
- Dimensions (mm) LxWxH: 90 x 70 x 20
- Cable Length: 1.4 meter
Maytech Upgrade MTSP F60100 100A V6 Based VESC Speed Controller with Heat Fin for Foil Assist Esk8 Robots
₹13,570.00 (Inc. GST)₹11,500.00 (+18% GST Extra)
Specification:
- Model No- MTSP F60100 VESC Controlled
- Count Current- 1000A
- Input Voltage- 3-12S Li-po (12.6V-50V)
- Burst Current- 240A
- Hardware- VESC6.0
- Software- VESCTOOL Compatible
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
₹94.40 (Inc. GST)₹80.00 (+18% GST Extra)
Specification:
- Input Supply voltage (V): 4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz): 5
- No. of motors controlled by driver: 2
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
₹2,098.99 (Inc. GST)₹1,778.81 (+18% GST Extra)
Specification:
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
Motor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
₹460.20 (Inc. GST)₹390.00 (+18% GST Extra)
Specifications:
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1
MX1508 Dual H Bridge DC PWM Stepper Motor Driver
₹45.00 (Inc. GST)₹38.14 (+18% GST Extra)
Specifications:
- The module supply voltage: 2V-10V.
- Signal input voltage: 1.8-7V.
- Single Opera:ting current: 1.5A
- Peak current: up to 2.5A
- The mounting hole diameter: 2mm
MX1919 Based Motor Driver Module – 2.5A (Upgraded Version)
₹169.00 (Inc. GST)₹143.22 (+18% GST Extra)
Specifications:
- Operating Voltage: 2 – 10VDC
- Operating Current: 2.5A (max)
- Compatible With Arduino and Raspberry Pi
- 2 Pin Connectors for Motors and supply
PCA9685 16-Channel 12-bit I2C interface Servo PWM Driver
₹413.00 (Inc. GST)₹350.00 (+18% GST Extra)
Specifications:
- 5V compliant, and still talks to a 3.3V microcontroller
- 6 “address select” pins for configuring up to 62 ICs on a single I2C bus
- PWM frequency adjustable up to approximately 1.6kHz
- 12-bit frequency resolution (equates to about 4µs resolution at 60Hz refresh rate)
- Configurable as a push-pull or open-drain output
- The output enables the pin available for outside-the-microcontroller “shut it down!” control.
PlayStation PS2 Receiver adaptor, 4 DC Motors & 8 PWM Servo Controls
₹2,449.98 (Inc. GST)₹2,076.26 (+18% GST Extra)
Specifications:
- Use the TB6612 chipset to provide 1.2A (3A peak) output per channel and run a 4.5-13.5V DC motor
- Can drive 4 DC motors or 2 stepper motors
- Additional 4 PWM outputs are available to control 4 servos
- Support PS2 wireless controller
- Support Bluetooth module and ultrasonic sensor
- Customizable I2C address, supporting multiple drive stacking cascades
- Provides a complete code base and rich sample programs that are easy to use.
Refurbish DC5-30V 12V 24V 5A DC Motor Controller PWM Adjustable Speed Digital display encoder duty ratio frequency MAX 15A ZK-MG
₹525.10 (Inc. GST)₹445.00 (+18% GST Extra)
Specifications:
- Working voltage: DC5V~30V, input anti-reverse connection protection
- Rated current: 5A maximum current 15A
- Maximum power: 150W
- Working frequency: 1KHz~99KHz adjustable, 1KHz step, default frequency of 20KHz, accuracy of about 1%
- Duty cycle: 0-100%, 1% step
- Product size: 79mm*43mm*26mm
Servo Motor ESC Tester
₹116.82 (Inc. GST)₹99.00 (+18% GST Extra)
Specifications:
- Offer 3 modes to check servos or ESC
- Supply voltage: 4.8V-6.0V
- Output Signal: 1.5ms±0.5ms
- Three mode selection [Manual, Neutral and Auto]
- Enclosure Box
- Mode selection LED Indicator
- Adjustable Knob for manual speed control
- Operating Temperature Range: -40~+85°C
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously.
SimonK 30A BLDC ESC Electronic Speed Controller Without Connectors
₹440.14 (Inc. GST)₹373.00 (+18% GST Extra)
Specification:
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
- Application: BLDC Motors, Multirotor, Rc Planes etc.
SimonK 30A Brushless Speed Controller ESC Multicopter Helicopter Airplane – Good Quality
₹384.00 (Inc. GST)₹325.42 (+18% GST Extra)
Specification:
- MODEL: STANDARD 30A BLDC ESC ELECTRONIC SPEED CONTROLLER
- WEIGHT: 23g
- DIMENSIONS: 45 x 24 x 9 mm(LxWxH)
- Â Color: Yellow/Red(Depends on Availability)
- CURRENT (A): 30A
- BEC: 3A
- Li-Poly: 2-3
- Ni-Mh/Ni-CD: 4-10 Ni-Mh
- CONSTANT CURRENT: 30A Max 40A<10s
- Li-Poly 2-3 CELLS; Ni-MH 4-10 CELLS Auto Detect
- Break On/Off
- Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo
- APPLICATION: Multirotors, Rc Airplanes, etc.
SimonK 30A ESC with connectors Red
₹385.86 (Inc. GST)₹327.00 (+18% GST Extra)
Specifications:
- High-quality MOSFETs for BLDC motor drive
- High-performance microcontroller for best compatibility with all types of motors at greater efficiency
- Fully programmable with any standard RC remote control
- Heat sink with high-performance heat transmission membrane for better thermal management
- 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters
- Throttle range can be configured to be compatible with any remote control available
in the market.
SmartElex 10S DC Motor Driver HAT
₹749.01 (Inc. GST)₹634.75 (+18% GST Extra)
Specifications:
- Wide 6V to 28V motor Operating Voltage.
- One brushed DC motor Bidirectional control.
- Current limiting at 35A.
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Internal thermal shutdown
- Under-voltage lockout
SmartElex 15D Dual Channel DC Motor Driver
₹1,998.92 (Inc. GST)₹1,694.00 (+18% GST Extra)
Specifications:
- Support motor voltage from 7V to 28V.
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent and Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On board push buttons for test and manual operation.
SmartElex 15S DC Motor Driver 15A (30A Peak)
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 6.8-30 VDC.
- Continuous Current: 15 Amp.
- PWM Frequency: 20 KHz.
- Max Peak current: 30 Amp(For 10 Seconds).
- One brushed DC motor Bidirectional control.
Smoother Module for Stepper Driver Motor V1.0
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
Specifications:
- Minimum operating voltage: 8V
- Maximum operating voltage: 35V
- Continuous current per phase: 1 Amp
- Maximum current per phase: 2 Amp
- Minimum logic voltage: 3V
- Maximum logic voltage: 5.5V
- Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
- Reverse voltage protection?: No