Showing 1–24 of 105 results
3-in-1 FT232RL USB to Serial Module USB / MINI / Micro to UART
₹535.01 (Inc. GST)₹453.39 (+18% GST Extra)
- Material : ABS + chip
- Onboard toggle switch : 5V/3V level interface
- Dimensions (mm) : 40 x 36 x 4
5V Gigabit PoE Splitter, USB Type C, 48V to 5V 2.4A Adaper
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Features
- Compatible with the Raspberry Pi 4
- USB-C Output connector
- 5V 2.4A Output
- 48V-57V input
- Maximum power 12W
- Gigabit network speeds (10/100/1000Mbps)
- IEEE802.3af/at compliant
- Power Pins: 1/2(+) 3/6(-)
5V Gigabit PoE Splitter, USB Type C, 48V to 5V 2.4A Adaper
₹767.00 (Inc. GST)₹650.00 (+18% GST Extra)
Features
- Compatible with the Raspberry Pi 4
- USB-C Output connector
- 5V 2.4A Output
- 48V-57V input
- Maximum power 12W
- Gigabit network speeds (10/100/1000Mbps)
- IEEE802.3af/at compliant
- Power Pins: 1/2(+) 3/6(-)
ADS1115 16 Bit I2C ADC Analog to Digital Converter Module
₹193.52 (Inc. GST)₹164.00 (+18% GST Extra)
Specifications:
- Single-shot mode: automatically turns off
- Low current consumption: Continuous mode 150 μA
- Wide supply voltage range: 2.0V to 5.5V
- Interfacing is done via I2C
- Programmable data rate: 8SPS to 860SPS
- Low drift internal voltage reference
- Internal Oscillator
- Internal PGA up to 860 samples per second (SPS)
- Four single-ended or two differential inputs (ADS1115)
- Operating temperature: -40 ° C to + 140 ° C
- Programmable comparator
Altera MAX II EPM240 CPLD Development Board
₹792.99 (Inc. GST)₹672.03 (+18% GST Extra)
Specifications:
- Onboard EPM240T100C5N chip
- EPROM chip configuration using EPCS4, the size of 8Kbit
- Onboard 50M active patch crystal (Crystal Slaughter halfback)
- Power supply with a largemouth outlet, single 5V power supply
- Board has a power indicator and resets switch
- Board Dimension (LxWxH) mm: 72 x 52 x 13mm.
AT24C256 I2C interface EEPROM memory module
₹74.34 (Inc. GST)₹63.00 (+18% GST Extra)
Specifications:-
- Chipset : AT24C256.
- Operating Temperature: -55°C to 125°C.
- Storage Temperature: -65°C to 150°C.
- The voltage on Any Pin with respect to the ground: -1.0V to 6.25V.
- Maximum Operating Voltage: 6.25V DC.
Audio Convertor Digital to Analog
₹706.82 (Inc. GST)₹599.00 (+18% GST Extra)
Specifications:-
- Supports uncompressed 2-channel LPCM digital audio signal output.
- 24bit S/PDIF incoming bitstream on R/L Channels.
- support sampling rate at 32,44.1 48 and 96 kHz.
- Provides electromagnetic-noise-free transmission
- Easy to install and simple to operate.
AV To HDMI Converter
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
- Input ports: 1xRCA (Yellow, White, Red)
- Output ports: 1xHDMI Dimensions (mm): 66(D)x55(W)x20(H)
- Weight (g): 37 Composite
- input: PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N HDMI
- output: 1080p/60Hz, 720p/60Hz
AVR Single Chip Minimum Study System Development Board ATMEGA16A-PU 32A-PU MEGA16
₹259.60 (Inc. GST)₹220.00 (+18% GST Extra)
Specifications:
- 32 I/O pin all the leads.
- Classic ATmega16 minimum system, eliminating the hassle of soldering.
- Crystal: The socket hole welding facilitates the buyer to replace the crystal, 8M crystal.
- Support chips: ATmega16/ATmega32 and chip which pin-compatible.
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm).
- Expand outside 4 channel VCC, GND.
- Reset: Power-on-reset and reset button.
- Power LED (D1) and the program run indicator (D2).
- Standard ISP download interface.
BAFO Technologies USB to Serial DB9 Adapter with Cable
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)
Specifications:
- Brand: BAFO
- Model: BF-812
- Type: USB to DB9 (RS-232)
- USB to DB9 adapter converter cable
- USB full-speed (12Mbps)
- True bidirectional
- Compatible with Windows Vista / 7 /Server 2008/ Server2008R2 (32 & 64-Bit)
- Mac OS X1.7Lion and10.6Snow
BAFO Technologies USB to Serial DB9 Adapter with Cable (ORIGINAL)
₹908.60 (Inc. GST)₹770.00 (+18% GST Extra)
Specifications:
- Brand: BAFO
- Model: BF-810
- Type: USB to DB9 (RS-232)
- USB to DB9 adapter converter cable
- USB full-speed (12Mbps)
- True bidirectional
- Compatible with Windows 2000 / XP / Vista / 7 (32/64-bits), MAC OS 8.6 through 10.x
BAFO USB to Serial DB9 Male Adapter with Cable
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)
Specifications:
- Brand: BAFO
- Model: BF-812
- Type: USB to DB9 (RS-232)
- USB full-speed (12Mbps)
- Supports Windows 2000 / XP / Vista / 7 / 8 / 10 (32/64-bits)
Blueendless 10 in 1 USB-C Hub Docking Station Adapter with 3 * USB 3.0 / 60W Type-C PD / 4K HD Display Video Output / 1080P VGA / RJ45 Network Port / 3.5mm Audio Jack/Memory Card Readers
₹2,655.00 (Inc. GST)₹2,250.00 (+18% GST Extra)
Features:
- USB-C PD (Power Delivery) 60W: This hub supports Power Delivery with a maximum output of 60W through its USB-C port. It allows you to charge your device while using the hub, which is especially useful for laptops with limited USB-C ports.
- USB 3.0 Ports (x3): The hub includes three USB 3.0 ports, offering high-speed data transfer for connecting peripherals such as external hard drives, flash drives, or other USB-enabled devices.
- 4K HD Display Video Output: The hub supports 4K HD video output, allowing you to connect an external display or monitor with a high resolution for an enhanced viewing experience.
- 1080P VGA: This hub features a VGA port, supporting 1080P resolution, which enables you to connect to monitors, projectors, or other VGA-compatible displays.
- RJ45 Network Port: The inclusion of an RJ45 Ethernet port provides a stable and reliable wired network connection, which can be useful in situations where a wired connection is preferred over Wi-Fi.
- 3.5mm Audio Jack: The hub includes a 3.5mm audio jack, allowing you to connect headphones, speakers, or other audio devices for an enhanced audio experience.
- Memory Card Readers: The hub is equipped with memory card readers, providing compatibility with various types of memory cards such as SD and microSD cards. This feature is handy for transferring data between your computer and memory cards from cameras, smartphones, or other devices.
CH340G USB to RS232 TTL Auto Converter Adapter Module for Arduino
₹113.00 (Inc. GST)₹95.76 (+18% GST Extra)
Features:
- Resettable fuse with 500mA
- 3.3V / 5V real switchable
- 3.3V comes with the transformer
- Green Data reception mentioning an indicator
- Multifunction CTS access products
- Dual protection circuit
- Full-function pins 5P
- Blue power indicator
- Stablemaster chip
- Red data transmission indicator
- Multifunctional RTS interface
- Dual protection circuit
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
₹65.00 (Inc. GST)₹55.08 (+18% GST Extra)
Features:
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Microcomputer with cold start reset button
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
₹223.02 (Inc. GST)₹189.00 (+18% GST Extra)
Features:
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
- Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
- Provide 5V-3.3V power supply output
Cp2102 6-in-1 multi-function serial port module, USB-ttl 485 232, bidirectional conversion, compatible with 3.3v/5v level
₹454.30 (Inc. GST)₹385.00 (+18% GST Extra)
Specifications:
- Functionality: Multi-function serial port module
- Interface: USB-TTL 485 232
- Conversion: Bidirectional (Supports both sending and receiving)
- Compatibility: Compatible with 3.3V and 5V logic levels
- Chipset: CP2102
- Number of Ports: 6 (provides flexibility in connecting various devices)
- Applications: UART communication, microcontroller interfacing, USB to serial conversion
- Operating Voltage: Typically 3.3V or 5V (confirm with datasheet)
- Drivers: CP210x USB to UART Bridge VCP Drivers (commonly used)
- Operating Systems: Compatible with various operating systems
- Dimensions: Compact and module-based design
CP2102(6-pin) USB 2.0 to TTL UART serial converter
Original price was: ₹182.90.₹164.02Current price is: ₹164.02. (Inc. GST)₹139.00 (+18% GST Extra)
Specifications:
- Stable and reliable chipset CP2102.
- USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 6pin connector.
- All handshaking and modem interface signals.
- Baud rates: 300 bps to 1 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
- Hardware or X-On/X-Off handshaking supported.
- Works with existing COM port PC Application
Digital DT-9000 Passive RS232 to RS485 converter
₹534.54 (Inc. GST)₹453.00 (+18% GST Extra)
Specifications :
- Interface characteristics: interface compatible with EIA/TIA RS-232C, RS485 standard
- Electrical interface: RS-232 end DB9 pass connector, RS-485 end DB9 needle type connector, with terminal
- Work mode: asynchronous half duplex differential transmission
- The transmission medium: twisted pair cable (wire diameter greater than or equal to 0.5MM) or shielded wire
- The transmission rate: 300-115.2KBPS
- Size: 64mmX33mmX17mm
- The use of the environment: -20 degrees to 70 degrees, relative humidity of 5% to 95%
- The transmission distance: less than 1200 meters (RS-485 end) 15 meters (RS-232 end) within
- The protection of lightning surge protection grade: RS-485 interface of each line of 600W
- Two kinds of communication modes: point to point / two line half duplex and point to multipoint / two line half duplex
Digital DT-9003 Passive RS232 to RS485/RS422 converter
₹817.74 (Inc. GST)₹693.00 (+18% GST Extra)
Specifications :
- Â Interface characteristics: compatible with EIA/TIA RS-232C, RS-485/RS-422 standard
- Electrical interface: DB9 female connector at RS-232 end, DB9 male connector at RS485/RS422 end, with 6 position terminal board
- Â Working mode: Asynchronous Full Duplex, half duplex automatic selection of differential transmission, without jumper settings
- Transmission medium: twisted pair wire or shielded wire
- Transmission rate: 300BPS-115.2KBPS
- Size: 64mmX33mmX17mm
- Use of the environment: -20 degrees to 70 degrees, relative humidity of 5% to 95%
- Transmission distance: 1200 meters (RS-485 end), 5 meters
- (RS-232 end)
Digital DT-9004 Passive RS232 to RS485 converter(with lighting)
₹1,135.16 (Inc. GST)₹962.00 (+18% GST Extra)
Specifications :
- Interface characteristics: interface compatible with EIA/TIA RS-232C, RS485 standard
- Electrical interface: RS-232 end of the DB9F, RS-485 is DB9M connector
- Work mode: asynchronous half duplex
- The transmission medium: twisted pair (diameter greater than or equal to 0.5MM) or shielded wire
- The transmission rate: 300-115.2KBPS
- Size: 64mmX33mmX17mme
- The use of the environment: -20 C to 70 C, relative humidity of 5% to 95%
- The transmission distance: 1200 meters (RS-485) to 15 meters (RS-232)
- Protection class: surge protection of RS-485 interface on each line of the 600W.
- Two kinds of communication: two line / half duplex point-to-point and point to multipoint / two wire half
duplex - Note: in order to prevent reflection and interference signal, to pick up a matching resistor in the circuit of the terminal (parameter 120 ohm 1/4W), as the case may
Downloader Expansion Board for TTGO T-Internet- POE
₹241.90 (Inc. GST)₹205.00 (+18% GST Extra)
Specifications:
- FLASH:4MB
- SRAM:520kB SRAM
- Button: BOT, Rest
- USB to TTL:CP2104
- Modular interface : SD card,UART,SPI,I2C,PWM,I2S,ADC
- On-board clock : 32.768MHz crystal oscillator
- Working temperature range : -40℃ ~ +85
Dtech Digital DT-9011 Passive RS232 photoelectric isolation protector
₹1,909.24 (Inc. GST)₹1,618.00 (+18% GST Extra)
Specifications :
- Standard: EIA RS-232 standard
- RS-232 signal: TXD,RXD, GND
- Working: Asynchronous, point to point
- Transfer rate: 300-912600bps,auto sense serial signal rate5. Isolate signal: TXD,RXD, GND
- Transfer distance: 5m
- RS-232 port protection: 600W surge,15KV ESD protection
- Isolation: 5000V
- Port type: DB9F, DB9M
Dtech Digital DT-9015 Passive RS232 RS485 Converter with LED Signal Photoelectric Isolation Type Indicator
₹2,680.96 (Inc. GST)₹2,272.00 (+18% GST Extra)
Specifications :
- Product name: RS-232 to RS-485 Converter with Isolation
- Standards: RS-232C, RS-485 EIA/TIA
- Connector: RS-232 DB9 female, RS-485 DB9 male
- Protection: RS-232 ±15KV ESD protection,RS-485 each line 600W lightning, surge protection
- Isolation: Isolated voltage 2,500Vrms  500DC non-stop
- Working mode: Asynchronous half-duplex
- RS232 to RS485 Two-way transmission
- Dual LED display transmission status
- Built-in power stealing circuit, support three-wire serial port
- Baud rate adaptive:1200bps-512kbps
- Transmission media: Twisted-pair or shielded cable
- Transmission rate:38,400bps  to 300m; 9,600bps to 1.2Km