Showing 145–168 of 239 results
PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)
Specifications:-
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
PIC Programmer Development Board
Specifications:Â
- PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (Example:Â 16F877A - 40 PIN).
- ICSP Socket for Programming through PICKIT2 or PICKIT3.
- On board Regulated 5v ,12v Supply, Easy to test with Burg Connectors wires.
- An RS232 Serial Port, 7 Segment Multiplexed Display, DC Power Supply Connector(12v Ac or Dc).
- READY INTERFACE For LCD display 2linex16Character, 24Cxx (I2C) (EEPROM), RTC (DS1307), 4 LED array, Matrix Key Pad, 4 Interrupt Switches, ADC Interface Support.
- ULN2008 Support For Interfacing Stepper Motors. Package Content : PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A - 40 PIN).
PICKIT 2 PROGRAMMER / DEBUGGER
PICKIT 3.5 Debugger / Programmer
Specification :
- USB (Full speed 12 Mbits / s interface to host PC)
- Real-time execution
- MPLAB IDE compatible (free download from Microchip)
- built-in over-voltage / short circuit monitor
- Firmware upgradeable from PC / web download
- totally enclosed
- Diagnostic LEDs (power, busy, error)
- read/write program and data memory from a microcontroller
- erase program memory with Verification
- Freeze peripherals at a breakpoint
- program up to 512K byte flash with the Programmer to Go
- ICSP cable included
PICkit3 Debugger Programmer Emulator Controller Development Board
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
PL2303 USB To TTL(Serial) Converter Module
Specifications :Â
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real time.
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power.
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside.
- The electrostatic package ensures the board will not be damaged before use.
- Support WIN7 system.
PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable
Specifications:
- Input Supply voltage: 3.3.~ 5 V
- Connector type: USB To TTL RS232
- Cable length: 80 Cm
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
PoE Splitter Power Over Ethernet Adapter Active 48V to 12V
Specifications:
- Output port adapter: RJ45 male and male DC jack 5.5*2.1mm
- Data rate: 10/100Mbps
- Power Input: DC48V
- Power Output: DC12V 2A
- Data Output Port: RJ45 Male
- Devices will be detected before poe input.
PWM to Voltage 0-100% to-10V Converter Module
RC Absorption/Snubber Circuit Module Relay Contact Protection Resistance Surge
Specification:Â
RC absorption circuit module is used on protecting the relay or thyristor because it can avoid damage from the inductive electromotive force generated by the inductive load when on or off. Preventing electromagnetic interference and increasing the anti-jamming capability of the microcontroller.
RS-232 RS232 to RS-485 RS485 Interface Serial Adapter Converter
RS232 Serial DB9 Pin Female to USB 2.0
Specifications:
- Full compliant with the USB2.0/1.1 standard
- Supports the RS232 Serial interface
- Supports automatic handshake mode
- Over 1Mbps data transfer rate
- Supports Remote wake-up and power management
- Transfers your RS232 device to a USB device
- Support WINDOWS 98/ME/2000/XP/Server 2003/VISTA / Server 2008/Win7 32 bits through Microsoft digital signature authentication
RS232 to RS485 serial port Data Interface Adapter Converter
Specification:
- Data Transfer Rate: 300-115200bps . Operating Distance: 1200m for RS485, 5m for RS232
- Transmission media: Twisted-pair or shielded twisted pair (STP).
- Power: None required, uses TD as power source ,environment: -10C to 85C, 5% to 95% RH
- Interface: Compatible with EIA/TIA RS-232C standard and RS-485 standard.
- Make: HXID & HEXIN
- Working mode: Asynchronous, half-duplex, differential transmission.
RS232 To TTL Serial Converter Module
Specifications:
- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- Operates up to 250 kbit/s
- Power supply: external dc
- interface: TXD, RXD, GND, VCC
- Dimensions: 33mm*32mm*16mm
RS232 To TTL Serial Converter Module With DB9 Connector – 8 Pin
RS232 to TTL Serial Port Converter Adapter Communication Module
Features:
- It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, and hard disk repair set-top box upgrade.
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.
- Pre-assembled compact-size board.
- Suitable for use with most microcontrollers.
- Operates up to 250 kbit/s.