Showing 37–45 of 239 results
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver
₹223.02 (Inc. GST)₹189.00 (+18% GST Extra)
Features:
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversion support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board
- Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
- Provide 5V-3.3V power supply output
CH341A Programmer USB to UART IIC SPI TTL ISP EPP/MEM Parallel Port Converter
₹306.80 (Inc. GST)₹260.00 (+18% GST Extra)
Specifications:
- Model: CH341A Programmer
- Operating Temperature Range: -40°C to 85°C
- Operating Voltage: 3.3 – 5 V
- Support serial port: support USB to 12C, SPI interface
- Support Parallel Port:support usb to printer and EPP or MEM parallel port
CH341A USB to I2C / IIC / SPI / UART / TTL / ISP Adapter EPP / MEM Parallel Port Converter
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Specifications:
- Full speedUSB Device interface，compatibleUSB2.0，standardUSB-AMale head design；
- computerUSBDirect interface power supply，Simulation standard serial port，Used to upgrade the original serial port peripherals，Or byUSB Add additional serial port；
- support3.3Vand5V TTLtarget system ，Computer terminalWindows The serial port application program under the operating system is completely compatible，No modification required；
- Serial port support5、6、7 perhaps8 Data bits，Odd check is supported、Even check、blank、Mark and no check；
CH375B USB Disk Read-write Module USB Flash Disk For Arduino
₹236.00 (Inc. GST)₹200.00 (+18% GST Extra)
- 2×8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- On board 3.3 V LDO 1117, provides 800 mA current.
- 5 V power supply is powered by the target board.
- 12 MHZ crystal.
CJMCU MCP4725 I2C DAC Breakout Development Board
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)
Feature:
- 12-bit resolution
- I2C Interface (Standard, Fast, and High-Speed supported)
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
CJMCU TCA9548A I2C 8 Channel Multiple Extensions Development Board
₹116.01 (Inc. GST)₹98.31 (+18% GST Extra)
Features :
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
- I2C Bus and SMBus Compatible.
- 5-V Tolerant Inputs.
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
CJMCU-0102 TXS0102 2 Bit Bidirectional Voltage Level Converter I2C Switch
₹147.00 (Inc. GST)₹124.58 (+18% GST Extra)
Specification:
- Model: I2C Module
- Type: Dc-dc converter
- Voltage: 3.3v
- Weight: 2 grams
- Dimensions (LxWxH): 16mmx15mmx1mm
CJMCU-1286 PIC16F1823 Microcontroller Development Board
₹413.00 (Inc. GST)₹350.00 (+18% GST Extra)
Features:
- CJMCU-1286 is a PIC microcontroller minimum system,
- Running stability and high reliability
- SCM internal resources are relatively small,
- The microcontroller is simple and convenient to use.
- The operating voltage is 1.8V – 5.5V.
CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module
₹248.98 (Inc. GST)₹211.00 (+18% GST Extra)
Features:
- Supports 1 Mb/s operation
- Suitable for 12V and 24V systems
- The externally-controlled slope for reduced RFI emissions
- Detection of ground fault (permanent Dominant) on TXD input
- Power-on Reset and voltage brown-out protection
- An unpowered node or brown-out event will not disturb the CAN bus
- Low current standby operation
- Protection against damage due to short-circuit conditions (positive or negative battery voltage)
- Protection against high-voltage transients
- Automatic thermal shutdown protection
- Up to 112 nodes can be connected
- High-noise immunity due to differential bus implementation
- Temperature ranges:
– Industrial (I): -40°C to +85°C
– Extended (E): -40°C to +125°C