Showing 25–48 of 60 results
High Precision Amplifier for Instrument MV Millivolt Differential (50times) Amplifier
I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module
ICL8038 Low Frequency Signal Generator Module Sine Square Triangle Wave Board Sinus Generator Frequency Generator DC 5V 12V
Specifications:
- Module size: 50*50mm
- Module working voltage: ±5V-±12V DC
- Low Frequency Drift with Temperature : 50ppm/oC
- Low Distortion Sine Wave:011%
- Triangle Wave Output Linearity : 011%
- Wide Frequency Range : 01001Hz to 300kHz
- Duty Ratio Range : 2% to 98%
- Simultaneous outputs an arbitrary Sine, Square, and Triangle Wave
ICL8038 Sine/Triangular/Square Wave Signal Generator Module 10-300KHZ
ICSP Universal Socket
J-link ULINK2 Emulator V8 all-ARM JTAG Adapter Board
KQ-330 Power Line Carrier Communication Module
Features:
- Supports Both RS232 and TTL Interface.
- Universal supply works over a power line voltage range of 85 to 265
- VAC, 50~60Hz
- Support QAM 256/64/16, DQPSK,DBPSK and ROBO modulation schemes
- Up to 85 Mbps data rate on the power line
- 56-bit DES Link Encryption with key management for security.
- Low power consumption
- Operating frequency 120 ~ 135KHZ, interface baud rate 9600bps. The actual baud rate 100bps.
LC Filter Module 3A 5-30V Built-in Reverse Polarity Protection Reduce the effect of radiated interference for FPV Drone
LC Power Filter 2A LC Filter Module Clear Transmission FPV Ripple Interference Video Signal Filtering for RC Drone
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver
MCP23017 16 Bit IO Port Expander Module I2C Interface Arduino Compatible
Specifications:
- Operating voltage: 3.0V-5.5V
- Drive chip: MCP23017
- Number of IO: 16 (input, output, interruption)
- Drive power supply: 25mAh
- 12C frequency: 100KHz, 400KHz, 1.7MHz
- Working temperature: -40? to 125?
- Chip level: Industrial grade
- Parallel multiple: Up to 8
- Drive Program: 51 and Arduino
- Size: Approx. 65mm x 19mm
MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module
MCU-2317 MCP23017 16-BIT I/O EXPANDER SERIAL I2C INTERFACE MODULE
Mini Tesla Coil 15W Plasma Speaker Tesla Kit Music Wireless Transmission Board Module DC 15-24V Plasma Stereo Speaker (All Soldered)
ODROID N2+ With 4GB RAM (With 12V 2Amp Power Adapter)
PCF8574 DIP I/O Expander Module Base PCB- iRobotics
RC Absorption/Snubber Circuit Module Relay Contact Protection Resistance Surge
Specification:Â
RC absorption circuit module is used on protecting the relay or thyristor because it can avoid damage from the inductive electromotive force generated by the inductive load when on or off. Preventing electromagnetic interference and increasing the anti-jamming capability of the microcontroller.
SG-002 Analog 0-12V 0-24mA Signal Generator for PLC and Panel Debugging & Device Testing
TEA5767 Stereo FM Radio Module with Detachable Antenna
Teensy 3.2 Development Board
Specifications:
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)