Showing 1–12 of 30 results
Filter by price
Arduino Shields
1602 LCD Keyboard Arduino Shield
₹218.30 (Inc. GST)₹185.00 (+18% GST Extra)
Specifications:
- PCB size: 82.8mm X 56.6mm X 1.6mm
- Power supply: 5V DC
Pin | Function |
A0 | Button(select, up, right, down and left) |
D4 | DB4 |
D5 | DB5 |
D6 | DB6 |
D7 | DB7 |
D8 | RS(Data or signal display selection) |
D9 | LCD1602 Enable |
D10 | Backlight control |
2.4 inch Touch TFT LCD Arduino Shield With Pen
₹564.99 (Inc. GST)₹478.81 (+18% GST Extra)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8-bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlights. By default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield
₹349.00 (Inc. GST)₹295.76 (+18% GST Extra)
Specifications :
- Coil Voltage : 5.0 volts
- Connector Type : Screw
- Contact Type : Normally Open , Normally Closed
- Operating Voltage : 5.0 volts
Arduino Sensor Shield V5 Expansion Board
₹88.50 (Inc. GST)₹75.00 (+18% GST Extra)
Quick Overview:
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
- Compatible With Arduino UnoÂ
CNC Shield V3 Arduino Uno Mega Compatible
₹121.54 (Inc. GST)₹103.00 (+18% GST Extra)
Specifications:
- Interfaces with Arduino Uno.
- 4 stepper motor driver outputs, 3 Axis + 1 Slave.
- Compatible with Pololu A4988 and DRV8825 stepper drivers and others.
- 6 Limit switch inputs.
- I2C and UART outputs.
- Additional connections available for Spindle Control, Stop/Start & Emergency Buttons.
- Fully tested after assembly.
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
₹188.80 (Inc. GST)₹160.00 (+18% GST Extra)
Features :
- 3 Axis stepper motor driver.
- Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
- Worked with Arduino nano.
CNC Three Axis Stepper Motor Drive Controller Motherboard compatible with Arduino
₹1,499.00 (Inc. GST)₹1,270.34 (+18% GST Extra)
Features :
1 axis stepper motor driver
2.Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
3.2A can be controlled within the two-phase four-wire stepper motor.
4.Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
5.Released the I2C interface, you can connect to the LCD I2C or other I2C module.
6.power DC5v interface, 7.5-12V voltage input.
7.GRBL compatible
8.worked with arduino nano.
Cytron Arduino PS2 Shield
₹1,348.74 (Inc. GST)₹1,143.00 (+18% GST Extra)
Features:
- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
Cytron LCD keypad Shield High Quality
₹618.32 (Inc. GST)₹524.00 (+18% GST Extra)
Quick Overview:
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
Data Logger module Logging Shield data Recorder Shield
₹290.28 (Inc. GST)₹246.00 (+18% GST Extra)
Specifications:
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- A real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
DFDMX Shield for Arduino Leonardo
₹3,953.00 (Inc. GST)₹3,350.00 (+18% GST Extra)
Specifications:
- The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or “shield”) for the Arduino, just by adding the DMX-shield on the top of the Arduino.
- This DMX / RDM Shield is a low-cost high quality solution that allows you to connect your Arduino-driven artwork into DMX512 networks.
- The shield is populated with high-quality NEUTRIK XLR 3pin Connectors (1x male and 1x female).
- The MAX485-based shield can be used as DMX Master, Slave and as RDM transponder.A unique RDM device id will be handed out from out range to you as well, this will make your device worldwide unique.
- Do not need to buy expensive equipment for loading protocol change, Equipped with high-quality NEUTRIK 3-pin plug, Ensure a reliable connection with other music devices.
DIY Nano IO Shield V1.05
₹138.06 (Inc. GST)₹117.00 (+18% GST Extra)
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Compact size;
- Leads all pins out, convenient for wiring, and doing experiments.