Showing 145–168 of 286 results
Filter by price
Wireless Modules
IPEX1 to SMA Female Connector Cable 13mm RG1.13 – 50cm Long
₹218.30 (Inc. GST)
₹185.00 (+18% GST Extra)
₹185.00 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 100cm Long
₹142.00 (Inc. GST)
₹120.34 (+18% GST Extra)
₹120.34 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 10cm Long
₹93.22 (Inc. GST)
₹79.00 (+18% GST Extra)
₹79.00 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 150cm Long
₹198.00 (Inc. GST)
₹167.80 (+18% GST Extra)
₹167.80 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 15cm Long
₹87.01 (Inc. GST)
₹73.73 (+18% GST Extra)
₹73.73 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 200cm Long
₹249.00 (Inc. GST)
₹211.02 (+18% GST Extra)
₹211.02 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 20cm Long
₹89.00 (Inc. GST)
₹75.42 (+18% GST Extra)
₹75.42 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 25cm Long
₹97.00 (Inc. GST)
₹82.20 (+18% GST Extra)
₹82.20 (+18% GST Extra)
IPEX1 to SMA Female Connector Cable RG1.13 – 30cm Long
₹135.99 (Inc. GST)
₹115.25 (+18% GST Extra)
₹115.25 (+18% GST Extra)
IR Line Sensor Base PCB i-Robotics
₹29.50 (Inc. GST)
₹25.00 (+18% GST Extra)
₹25.00 (+18% GST Extra)
LDR Light Sensor Base PCB- iRobotics
₹35.40 (Inc. GST)
₹30.00 (+18% GST Extra)
₹30.00 (+18% GST Extra)
LoRa 433MHZ SX1278 SX1276 Wireless Transmitter and Receiver RF Module 8000M E32-433T30D UART
₹1,330.00 (Inc. GST)
₹1,127.12 (+18% GST Extra)
₹1,127.12 (+18% GST Extra)
Lora Antenna 433mhz
₹89.00 (Inc. GST)
₹75.42 (+18% GST Extra)
₹75.42 (+18% GST Extra)
Lora Antenna 868mhz
₹92.04 (Inc. GST)
₹78.00 (+18% GST Extra)
₹78.00 (+18% GST Extra)
Lora Antenna 915mhz
₹89.00 (Inc. GST)
₹75.42 (+18% GST Extra)
₹75.42 (+18% GST Extra)
M5 Stack M5StickC PLUS ESP32-PICO Mini IoT Development Kit
₹2,500.00 (Inc. GST)
₹2,118.64 (+18% GST Extra)
₹2,118.64 (+18% GST Extra)
MH-M38 Wireless Bluetooth Audio Receiver Module with Cable
₹140.42 (Inc. GST)
₹119.00 (+18% GST Extra)
₹119.00 (+18% GST Extra)
MINI CC3D GPS Flight Controller
₹1,144.60 (Inc. GST)
₹970.00 (+18% GST Extra)
₹970.00 (+18% GST Extra)
Mini USB wireless Network Card 150Mbps Wi-fi Dongle
₹354.00 (Inc. GST)
₹300.00 (+18% GST Extra)
₹300.00 (+18% GST Extra)
Specifications :
- Dynamic data rate : 802.11b : 1,2,5.5,11Mbps;
- 802.11g : 6,9,12,18,24,36,48,54Mbps;
- 802.11n: (20MHz)MCS0-7, up to 72 Mbps;
- Â (40MHz)MCS0-7, up to 150 Mbps;
- Security support for 64/128 WEP, WPA, WPA2, WAPI.
- Operates in 2.4GHz frequency band.
- Drivers support multiple operation systems.
MT76813DBI ESP8266 Serial WIFI wireless Gain Antenna
₹68.99 (Inc. GST)
₹58.47 (+18% GST Extra)
₹58.47 (+18% GST Extra)
NEO-M8N GPS Module with Ceramic Active Antenna
₹1,113.92 (Inc. GST)
₹944.00 (+18% GST Extra)
₹944.00 (+18% GST Extra)
NodeMcu ESP8266 CH340 V3 Lua Wifi Board
₹195.88 (Inc. GST)
₹166.00 (+18% GST Extra)
₹166.00 (+18% GST Extra)
Specifications:
- Lowest cost WI-FI
- Flash size: 4MByte
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
NodeMCU ESP8266 CP2102
₹299.01 (Inc. GST)
₹253.39 (+18% GST Extra)
₹253.39 (+18% GST Extra)
- Lowest cost WI-FI
- Integrated low power 32-bit CPU
- Arduino-like hardware IO
- Upload codes from the Arduino IDE
- Wi-Fi Module – ESP-12E module similar to ESP-12 module but with 6 extra GPIOs.
- USB – micro USB port for power, programming and debugging
- Headers – 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Flash Memory(Mb):4
- Support:SDIO 1.1/2.0, SPI, UART
- Length (mm):49
- Width (mm):24
- Height (mm):13
- Weight (gm):8
- Misc – Reset and Flash buttons
- Power – 5V via micro USB port
- Dimensions – 49 x 24.5 x 13mm
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
₹197.06 (Inc. GST)
₹167.00 (+18% GST Extra)
₹167.00 (+18% GST Extra)
Specifications:
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Small and Handy module.
- The spacing between mounting headers is 25.5 mm.
- It uses Lua scripting language programming.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- USB power output only for NodeMCU v3