Showing 1–9 of 73 results
2.2 Inch Flex Sensor
Specifications:
- Operating voltage of FLEX SENSOR: 0-5V
- Can operate on LOW voltages
- Power rating : 0.5Watt (continuous), 1 Watt (peak)
- Life: 1 million
- Operating temperature: -45ºC to +80ºC
- Flat Resistance: 25K Ω
- Resistance Tolerance: ±30%
- Bend Resistance Range: 45K to 125K Ohms(depending on bend)
- Compatiable with  ArduinoÂ
4.5 Inch Flex Sensor
Specifications:
- Operating voltage of FLEX SENSOR: 0-5V
- Can operate on LOW voltages
- Power rating : 0.5Watt (continuous), 1 Watt (peak)
- Life: 1 million
- Operating temperature: -45ºC to +80ºC
- Flat Resistance: 25K Ω
- Resistance Tolerance: ±30%
- Bend Resistance Range: 45K to 125K Ohms(depending on bend)
- Compatiable with  ArduinoÂ
50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor
BMP 180 PRESSURE SENSOR
Specifications:
- Vin: 3 to 5VDC
- Logic: 3 to 5V compliant
- Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
- Up to 0.03hPa / 0.25m resolution
- -40 to +85°C operational range, +-2°C temperature accuracy
- This board/chip uses I2C 7-bit address 0x77.
- Compatible with Andriod Board.
BMP 280 PRESSURE SENSOR
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
FlexiForce FlexiPot Strip Position Sensor
Force Sensor 15mm diameter
Specifications:
- Diameter: 15mm
- Measurement Range: Typically specified in units such as Newtons (N) or pounds-force (lbf)
- Sensitivity: The change in electrical output per unit change in force applied (e.g., mV/N)
- Accuracy: The degree of conformity between the measured value and the actual value
- Resolution: The smallest change in force that the sensor can detect
- Linearity: How well the sensor's output follows a straight line in response to changes in force
- Response Time: The time taken by the sensor to respond to changes in force
- Operating Temperature Range: The range of temperatures within which the sensor can operate effectively
- Operating Voltage: The voltage required to power the sensor
- Output Signal: The type of electrical signal generated by the sensor (e.g., voltage, current, digital)
- Material: The material used for the sensing element and housing, which may affect durability and compatibility with different environments
- Protection Rating: Degree of protection against dust, water, and other environmental factors (e.g., IP65)
- Mounting Options: Different ways the sensor can be mounted or installed in a system
- Compliance: Standards or regulations the sensor complies with (e.g., CE, RoHS)
- Cable Length: Length of the cable attached to the sensor for connectivity purposes