Showing 10–18 of 18 results
Filter by price
Flight Controllers
OMNIBUS F4 V2 PRO Flight Controller with SD Card Slot & BEC
₹4,395.50 (Inc. GST)₹3,725.00 (+18% GST Extra)
- Dimensions: 37 x 37 x 10 mm(L x H x W)
- Weight: 12 gm.
- SPI Gyro MPU6000
- MicroSD Blackbox
- F4 Processor (F405)
- 5v3a SBEC
- Built-in Current Sensor
- On-Board OSD (controlled by Beta flight, FC over SPI bus)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
- On-Board Voltage Regulator and Power supply (BEC)
PDB-XT60 with BEC 5V and 12V
₹328.99 (Inc. GST)₹278.81 (+18% GST Extra)
Specifications:
- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- 5V and 12V Output LED indicators
- Regulated 5V and 12V outputs
- BEC 5V output:Â 5V/2A (Max.2.5A 10s/minute)
- Output Ripple:Â 40mV (VIn= 16V, VOut= 5V@2A load)
- Short-circuit tolerant:Â 5 seconds/minute
- BEC 12V output (4S LiPoly, 13~18V DC):Â 12V/500mA (Max.0.8A 5s/minute)
- BEC 12V output (3S LiPoly): =3S LiPoly voltage – 1V
PIXHAWK 2.4.8 Combo Kit
₹14,950.60 (Inc. GST)₹12,670.00 (+18% GST Extra)
- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
Pixhawk I2C Port Expand Board with Cable
₹198.24 (Inc. GST)₹168.00 (+18% GST Extra)
Specifications:
- Number of Ports: 5.
- Board Dimensions: 33 x 12 x 6 mm(LxWxH)
- Net Weight: 5g
- Brand new and high quality
- The I2C splitter expands the I2C port to allow up to four additional peripherals to connect to Pixhawk.
Pixhawk Passive Buzzer and Switch
₹619.50 (Inc. GST)₹525.00 (+18% GST Extra)
Features:
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Adopts E-Switch red light switch.
- Length: 250mm .
- Switch mounting hole diameter 8mm.
- The same version with 3DR official version.
SP RACING F3 FLIGHT CONTROLLER ACRO VERSION
₹2,124.00 (Inc. GST)₹1,800.00 (+18% GST Extra)
Specification :
- CPU model : STM32F303
- Main MPU : MPU6050
- Barometer : Barometer
- Compass : NO
- PWM outputs : 8
- No. of UARTs : 3
- RSSI analog input : YES
- I2C input : YES
- Buzzer output : YES
- VBAT input : Yes-up to 4S (17v)
- LED strip output : YES
- Current sensor analog input : YES
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhau 2.4.6/2.4.8
₹1,499.00 (Inc. GST)₹1,270.34 (+18% GST Extra)
Features :
- Locate performance
- These are Pre-configured, flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 5 pin connectors for EZ connect to MEGA BLACK
- 4 pin connectors for only GPS use
- 4 pin connectors for compass only use
- Can use both 4 pin at once.
Ublox NEO 7M GPS With Compass for Pixhawk 2.4.6/2.4.8
₹1,398.99 (Inc. GST)₹1,185.59 (+18% GST Extra)
Features :
- Locate performance
- These are Pre-configured, flashed with the correct settings, and tested. To make them Plug and Play.
- Super Bright LED
- Backplane with Standard Mk style mounting holes 45mm X 45mm
- 38400 bps (Default) changed to 115200bps!
- Output GGA, GSA and RMC frames
- 1Hz (Default) changed to 5Hz!
- Permanent Configuration Retention
- compass on board
- 6 pin connectors for EZ connect to MEGA BLACK
- 4 pin connectors for only GPS use
- 4 pin connectors for compass only use
- Can use both 4 pin at once.
Universal GPS Folding Antenna Base Set
₹260.78 (Inc. GST)₹221.00 (+18% GST Extra)
Features:
- Material: CNC Aluminum alloy, carbon glass fiber rod
- Mounting rod diameter:Â 4mm
- Lead of rod: 14 cm.
- GPS plate diameter: 40 mm.
- Base plate diameter: 35 mm
- Mounting hole spacing: 16-35mm
- Weight: 20g
- Colour:Â Anodised black