Showing 1–24 of 219 results
A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a switch, but other operating principles are also used, such as solid-state relays.
Filter by price
Relays
1 channel 12V 10A Relay Control Board Module with Optocoupler
₹67.66 (Inc. GST)₹57.34 (+18% GST Extra)
Specifications:
- Working current : 10mA
- Trigger Current :10mA
- Trigger Voltage : 12VDC
- Switching Voltage VAC : 50/60HZ 10A
- Max. Load : 2AÂ 240V AC
1 channel 12V 30A Relay Control Board Module with Optocoupler
₹153.40 (Inc. GST)₹130.00 (+18% GST Extra)
Specifications :
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
₹164.31 (Inc. GST)₹139.25 (+18% GST Extra)
Specifications:
- Part Number: G3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50\60@2A
- Isolation: Phototriac
1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
₹145.00 (Inc. GST)₹122.88 (+18% GST Extra)
Specifications:
- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
- Zero Cross: Yes
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 channel 24V 10A Relay Control Board Module with Optocoupler
₹67.66 (Inc. GST)₹57.34 (+18% GST Extra)
Specifications:
- Working current : 12.5mA
- Trigger Current :2mA
- Trigger Voltage : 24VDC
- Switching Voltage VAC : 5060@2A
- Max. Load : 2A @240V AC
1 Channel 24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specification:
- Operating Voltage (VDC): 24
- Supply Current (A): 2mA
- Switching Voltage (VAC):50@2A
- Operating Temperature (C): -40 to 85
- Opt. Relative Humidity(RH): 20% 85%
- Storage condition (): 65 to 125
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
₹111.01 (Inc. GST)₹94.07 (+18% GST Extra)
Specifications:
- Channels: 1
- Control Voltage: 24V DC
- Relay Type: Solid State Relay (SSR)
- Load Voltage: Up to 250V AC
- Load Current: Up to 2A
- Fuse Type: Resistive Fuse
1 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specification:
- Operating Voltage (VDC): 3 ~ 24
- Supply Current (A): 2mA
- Switching Voltage (VAC):50@2A
- Operating Temperature (C): -40 to 85
- Opt. Relative Humidity(RH): 20% 85%
- Storage condition (): 65 to 125
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specifications:
- Operating Voltage (VDC) : 3-24V
- Supply Current (A)​ : 2mA
- Switching Voltage (VAC) : 50Hz 2A
- Operating Temperature (°C) : -40 to 85
- Opt. Relative Humidity(RH) : 20% ~ 85%
- Storage condition (℃) : – 65 to 125
1 channel 5V 10A Relay Control Board Module with Optocoupler
₹60.01 (Inc. GST)₹50.85 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel 5V 30A Relay Module with Optocoupler Isolation Supports High and Low Triger
₹408.99 (Inc. GST)₹346.61 (+18% GST Extra)
Specifications:
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
1 Channel Relay Module 12V High and Low Level Trigger Relay Control
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Specifications:
- High/Low-Level Trigger
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
1 Channel Relay Module 24V High and Low Level Trigger Relay Control
₹65.00 (Inc. GST)₹55.08 (+18% GST Extra)
Specifications:
- Peak Load of NO Connector: AC 250V/10A, DC 30V/10A
- Trigger Current: 5mA
- The Module Operating Voltage:24V
1 Channel Relay Module 30A with Optocoupler Isolation 24V Supports High and Low Triger
₹241.64 (Inc. GST)₹204.78 (+18% GST Extra)
Specifications :
- Channel: 1 channel
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 30A with Optocoupler Isolation 24V Supports High and Low Triger with Guide Rail
₹333.99 (Inc. GST)₹283.05 (+18% GST Extra)
Specifications:
- The module uses a high-quality 30A relay, normally open interface maximum load: AC 250V/30A, DC 30V/30A.
- Module operating voltage is available in 24V.
- Adopting paster OptoCoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- The module can be triggered by a jumper to set a high or low level.
- User-friendly interface design, all interfaces can be directly connected through the terminal block, which is very convenient.
1 Channel Relay Module 30A with Optocoupler, Isolation 12V High and Low Triger with Guide Rail
₹386.64 (Inc. GST)₹327.66 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 30A with Optocoupler, Isolation 5V High and Low Triger with Guide Rail
₹333.99 (Inc. GST)₹283.05 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 5V High and Low Level Trigger Relay Control
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Specifications:
- Peak Load of NO Connector: AC 250V/10A, DC 30V/10A
- Trigger Current: 5mA
- The Module Operating Voltage:5V
1 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control
₹375.00 (Inc. GST)₹317.80 (+18% GST Extra)
Specifications:
- Input: AC 220V-240V 50Hz/60Hz
- Launch battery: 12V 23A
- Incandescence lamp: ≤1000W
- Energy-saving lamp: ≤200W
- Number of energy-saving lamps: ≤6
- Compact fluoresce twin-tube: ≤280W
- Number of twin-tube: 6
- Remote control distance: 10M-50M
12V 1 Channel Bluetooth Relay Module Things Smart Home Remote Control Switch
₹594.01 (Inc. GST)₹503.39 (+18% GST Extra)
Features :
- Â Onboard high-performance MCU and SPP-C Bluetooth 2.1 slave module;
- Â Provide Bluetooth relay control APP;
- Â Control distance: 10M (open environment);
- Â Working voltage: DC12V;
-  Onboard 1 way 12V, 10A/250V AC 10A/30V DC relay, which can be activated continuously for 100,000 times, has diode effusion protection, and has a short response time;
- Â Onboard Bluetooth status indicator and relay indicator;
- Â Reserve the UART debugging interface, which can be used to modify the Bluetooth pairing password.
- Â Board size: 62*20mm
12V 1 Channel Relay Module (with Optocoupler)
₹100.30 (Inc. GST)₹85.00 (+18% GST Extra)
Specifications:
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
12V 1 Channel Songle Relay Module 30A Power Failure Relay
₹162.84 (Inc. GST)₹138.00 (+18% GST Extra)
Specifications:
- Voltage version: 12V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high-level or low-level trigger by the jumper
- The rated current of the interface is 16A
12V 16 Channel Relay Module (with Optocoupler)
₹602.01 (Inc. GST)₹510.17 (+18% GST Extra)
Specifications:
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
12V 2 Channel Relay Module (with Optocoupler)
₹81.00 (Inc. GST)₹68.64 (+18% GST Extra)
Features:
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided