12V Relay Module Single Channel (LOW LEVEL)
Specifications
- 250VAC 10A, 28VDCÂ 10A
- Indicator LEDs
- 12V control voltage
- Module size: 43mm x 17mm
12V Sugar Cube Relay (2 Pcs)
12V-24V 8A Adjustable Dimmer Switch For Single LED Strip
12V-40V 10A DC Motor PWM Speed Control Switch Governor
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
Specifications:
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
170W High Power H-Bridge Motor Driver Module For NMOS Brake Duty Cycle For DC 5-40V Motor 4 External NMOS Tubes Two PWM Inputs
Specifications:Â
- With full bridge driver chip + low resistance 55V110ANMOS, the motor can be turned forward and backward.
- Two PWM inputs, dutycycle regulated in 0-100%. Instant braking ability.
- The working voltage is 10-40V and the power is below 170W
- The control is simple and convenient. Only 3 input lines are needed to control the motor
- Chip built-in dead time hardware control, more suitable for frequent reversing. Reduce the loss of the pipe itself.
- Tin plating on the back of the module. A conductor can flow through a larger current.
- Support 5V, 3..3V logical input. Suitable for all types of single-chip IO port direct control. You can also control the positive and negative rotation of the motor by analog input.
- Board size: 38.8*67.5mm
2 Channel 12V Relay Module 30A with Optocoupler Isolation Supports High and Low Triger with Guide Rail
2 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
2 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
Specifications:
- Power supply : 3-24VDC/160mA
- Switching Voltage (VAC) : 240@2A
- Isolation : Phototriac
- Zero Cross : Yes
- 2-channel 2 AMP Solid State Relay board.
- Control 2 loads of up to 2 amps each at 240 VAC.
- Good for lighting, Holiday displays, etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
- Shipping Weight : 0.015 kg
- Shipping Dimensions : 6 × 3 × 1 cm