2×30 Cytron SmartDrive MDDS30 (80A Peak)
2×32 Sabertooth Motor Driver
Specifications:
- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
- Input modes: analog, R/C, serial (plain text or packetized), USB
- Power outputs can act as voltage clamps, brakes, or be controllable
- Size: 2.75” x 3.5” x 1.0” || 70 x 90 x 25 mm
2×5 Sabertooth Motor Driver for R/C
Specifications:
- Weight: 18g / 0.6oz
- Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
- 5A continuous per channel, 10A peak
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm
- 5" / 13cm servo pigtails
2×60 Cytron 7V-45V SmartDrive DC Motor Driver (100Amp Peak)
Specifications:
-
DC Brush motor Driver, not for brushless motor
-
Input Voltage (Motor): 7 - 45VDC
-
Single power operation, just connect power to battery input.
-
Dual Channels, it can drives two brush motor independently, or mixed.
-
Regenerative Braking.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
-
Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Top cover comes with two DC brushless fans to cool the driver.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
2×60 Sabertooth Motor Driver
Specifications:
- 60A continuous, 120A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
- Size: 3” x 3.5” x 1.8” || 76 x 89 x 46 mm
3 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control
3000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V)
3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
4 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
Specifications:
- Part Number: G3MB-202P
- Power supply:5 VDC/160mA
- Trigger Voltage (VDC):12
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
- 4-channel 2 AMP Solid State Relay board.
- Control 4 loads of up to 2 amps each at 240 V AC.
- Good for lighting, Holiday displays, etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
4 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
Specifications:
- Part Number: G3MB-202P
- Power supply:5 VDC/160mA
- Trigger Voltage (VDC):12
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
- 4-channel 2 AMP Solid State Relay board.
- Control 4 loads of up to 2 amps each at 240 V AC.
- Good for lighting, Holiday displays, etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
4 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
Specifications:
- Model Number: G3MB-202P
- Power supply: 24VDC/160mA
- Switching Voltage (VAC): 240@2A
- Isolation: Phototriac
- 4-channel 2 AMP Solid State Relay board.
- Control 4 loads of up to 2 amps each at 240 V AC.
- Good for lighting, Holiday displays, etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
4 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
4 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
4 Channel Relay Module 30A with Optocoupler Isolation 12V Supports High and Low Triger
Specifications:
- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
4 Channel Relay Module 30A with Optocoupler Isolation 24V Supports High and Low Triger
Specifications:
- Supply Voltage: DC 24V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF