433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch
₹588.82 (Inc. GST)₹499.00 (+18% GST Extra)
- Number of Channels -1 (One)
- Operating Voltage – 12V DC
- RF Frequency -433 MHz
- Receiver Sensitivity >90 dBm
- Dimension (LxWxH)- 35x30x16 mm
- Remote Control Distance >100 meter(In Open Space)
- Support remote control type Fixed code, learning code
5-36v Switch Drive High-power MOSFET Trigger Module
₹149.86 (Inc. GST)₹127.00 (+18% GST Extra)
Overview:
This 5-36v Switch Drive High-power MOSFET Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,  solenoid valves, PWM, motor speed control, lamp brightness. etc.
5000W AC 220V High-Power Electronic Regulator SCR Voltage Regulator Module
₹417.01 (Inc. GST)₹353.39 (+18% GST Extra)
Specification:
- Max power: 5000W (Resistive instantaneous load ultimate power.)
- Adjust the voltage: AC 0-220V (from high to low can go to 0, from low to high is about 20V)
- Efficiency: 90% or more
- Working voltage: AC 220V
- Dimensions: Length 85*Width 70* Height 40mm, without protruding knobs and connectors
5A PWM Speed Control Forward Reverse 5V 12V 24V DC Motor Driver Servo Motor Drive Board H Bridge Motor Driver Module
₹1,475.00 (Inc. GST)₹1,250.00 (+18% GST Extra)
Specifications:
- Product model: YYH-LWZ
- Input voltage: DC DC5V~27V
- Rated output current: 5A, can maintain continuous current within 5A
- Static standby current: only about 3MA
- Signal type: The control signal uses the sink current drive method, which supports the direct drive of most single-chip microcomputers, the optocoupler is completely isolated, and the PWM signal frequency supports within 20KHZ
- Use fast recovery diodes to prevent excessive anti-induced electromotive force from burning out the control part when the motor starts
5V – 2 Channel Relay Module (with Optocoupler)
Original price was: ₹105.38.₹68.44Current price is: ₹68.44. (Inc. GST)₹58.00 (+18% GST Extra)
Features
- High current relay, AC250V 10A, D 30V 10A
- 2 LEDs to indicate when relays are on
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 1 Channel Bluetooth Relay Module Things Smart Home Remote Control Switch
₹585.99 (Inc. GST)₹496.61 (+18% GST Extra)
Specifications:
- Onboard Bluetooth status indicator and relay indicator
- With optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 5VDC
- On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
5V 1 Channel Relay Module
Original price was: ₹68.44.₹40.72Current price is: ₹40.72. (Inc. GST)₹34.50 (+18% GST Extra)
Specification
- Trigger Voltage: 5 VDC
- Trigger Current : 20 mA
- Maximum Switching Voltage:Â 250VAC@10A; 30VDC @10A
- Single Pole Double Throw (SPDT) Configuration
- Power supply indicator lamp
5V 1 Channel Relay Module (with Optocoupler)
₹48.38 (Inc. GST)₹41.00 (+18% GST Extra)
Features
- Operating Voltage(VDC) : 5V
- Max. Current(mA) : 0.20 mA
- Current Capacity : 10A
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
5V 1 Channel Relay Module (without Optocoupler)
₹80.24 (Inc. GST)₹68.00 (+18% GST Extra)
Specifications:
5V 1 Channel Relay Module Infrared IR Remote Switch Control
₹273.76 (Inc. GST)₹232.00 (+18% GST Extra)
Specifications :
- DC 5V Home lighting system
- Remote control switch
- Smart Home / Home Automation
- Garage Door
- Remote controlled gates
- Security Monitoring
- LED lighting
- Fluorescent lamp
5V 1 Channel Songle Relay Module 30A Power Failure Relay
Original price was: ₹162.84.₹153.00Current price is: ₹153.00. (Inc. GST)₹129.66 (+18% GST Extra)
Specifications:
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
5V 16 Channel Relay Module (with Optocoupler)
₹958.16 (Inc. GST)₹812.00 (+18% GST Extra)
Specifications:
- 16-channel relay interface board, each one needs 15 – 25mA driver current
- Â Equipped with high-current relay, AC 250V 10A / DC 30V 10A
- Standard interface that can be controlled directly by microcontroller
- Â LED for indicating relay output status
- Compatibles with Arduino, raspberry pi, nodemcu boards.
5V 2 channel USB PC Intelligent Control Relay Module
₹424.80 (Inc. GST)₹360.00 (+18% GST Extra)
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
5V 4 Channel Relay Module (with Optocoupler)
₹168.74 (Inc. GST)₹143.00 (+18% GST Extra)
Specifications:Â
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when the relay is active – ~70mA (single), ~300mA (all four)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, disconnect is off;
- Input signal, signal, common Terminal and start conducting;
- Useful for appliance control;
- DC or AC signal, control, you can control the 220V AC load;
5V 4 Pin 30A Power Relay SLA-05VDC-SL-A
₹68.44 (Inc. GST)₹58.00 (+18% GST Extra)
Specifications:
- Supply Voltage: 5V
- Load capacity: 30A 250VAC/ 30A 30VDC
- Supply Current (A); 0.185
- Operating Temperature (°C); -25°C to +70°C
5V 7A Sugar Cube Relay (2 Pieces)
₹41.30 (Inc. GST)₹35.00 (+18% GST Extra)
Features:Â
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 240/125V AC
- Maximum DC load current: 7A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
5V 8 Channel Relay Module (with Optocoupler)
₹266.68 (Inc. GST)₹226.00 (+18% GST Extra)
Specifications:
-
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~600mA (all eight)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
- 5V 8-Channel Relay interface board
- LOW level trigger, equipped with indicator easy to recognize the working status
- Each relay has NO and NC ports, easier to connect and control the connected devices
- Selection of plastic material for high temperature and better chemical solution performance.
- PCB size: 5.7 x 13.8 cm
- Support control of 10A 30V DC and 10A 250V AC signals
- Compatible with Arduino, raspberry pi, nodemcu boards.
5V 8 Channels Relay, Module High and Low, Triggering Optocoupler, Isolation Relay Module, PLC Signal Amplifier, Board
₹1,933.20 (Inc. GST)₹1,638.30 (+18% GST Extra)
Specifications:
- Trigger Voltage (VDC) : 5
- Switching Voltage (VAC) : 230V 30A
- Switching Voltage (VDC) : 30V 30A
- Shipment Weight :
5V Modbus RTU 2, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
₹488.00 (Inc. GST)₹413.56 (+18% GST Extra)
Specifications:
- Product Name : 5V Modbus RTU 2 Channels Relay Module
- Working Voltage : DC 5V
- Working Current : 1A
- Operating Temperature (°C) : -25℃~85℃
- Working Humidity Range : 5%~95%RH
5V Modbus RTU, 1Channel Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
₹477.90 (Inc. GST)₹405.00 (+18% GST Extra)
Specifications:
- Â Product Name:1 Bit Modbus RTU Relay Module
- Â Working Voltage: DC 5V
- Â Working Current:1A
-  Work Temperature:-25℃~85℃
- Â Work Humidity:5%~95%RH
5V/7-28V ESP8266 WIFI 8 Channel Relay Module ESP-12E Development Board
₹1,336.00 (Inc. GST)₹1,132.20 (+18% GST Extra)
Specifications:
- Board size: 149*80mm
- Weight: 140g
- Power supply mode supports DC7-28V/5V
- Onboard WIFI module RST reset button
- 4M Byte Flash
5V/7-28V Power Supply 8-wayBluetooth Relay Module IoT Smart Home Mobile Phone APP Remote Control Switch
₹1,293.00 (Inc. GST)₹1,095.76 (+18% GST Extra)
Function features :
- Integrated design.
- APP remote control.
- Working Voltage: DC 7V-28V
- Work Temperature: -20℃~85℃
- Work Humidity: 0%~95%RH
- Automatic motor control
6 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
₹736.01 (Inc. GST)₹623.73 (+18% GST Extra)
Specifications:
- Part Number: G3MB-202P
- Working current(mA):12.5
- Trigger Current (mA):2
- Trigger Voltage (VDC):12
- Switching Voltage (VAC):5060@2A
- Max. Load:2A @240V AC
- Isolation: Phototriac
6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
₹867.99 (Inc. GST)₹735.59 (+18% GST Extra)
Specifications:
- Part Number: G3MB-202P
- Working current(mA):12.5
- Trigger Current (mA):2
- Trigger Voltage (VDC):12
- Switching Voltage (VAC):50\60@2A