Brush Motor Drivers

• Bidirectional control for four (4) brushed DC motors.
• Operating Voltage: DC 7V to 25V
• Maximum Motor Current: 1.5A continuous, 2.5A peak
• Buttons for quick testing.
• LEDs for motor output state.
• PWM and DIR inputs.
• Inputs compatible with 3.3V and 5V logic (Arduino, Raspberry Pi, PLC, etc).
• Reverse polarity protection.
• Board size: 10.67cm x 5.21cm

• Operating Voltage: 12 – 24VDC
• Operating Current: up to 8A
• Operating Temperature: -20 to 60
• Function: Can achieve stepless dimming

• Input supply voltage: DC 12V-40V
• The maximum output power: 400W
• The maximum continuous output current:8A
• Static Current:0.02 A ( Standby )
• PWM frequency: 13kHz
• Duty Cycle adjustable: 10%-100%

1. With full bridge driver chip + low resistance 55V110ANMOS, the motor can be turned forward and backward.
2. Two PWM inputs, dutycycle regulated in 0-100%. Instant braking ability.
3. The working voltage is 10-40V and the power is below 170W
4. The control is simple and convenient. Only 3 input lines are needed to control the motor
5. Chip built-in dead time hardware control, more suitable for frequent reversing. Reduce the loss of the pipe itself.
6. Tin plating on the back of the module. A conductor can flow through a larger current.
7. Support 5V, 3..3V logical input. Suitable for all types of single-chip IO port direct control. You can also control the positive and negative rotation of the motor by analog input.
8. Board size: 38.8*67.5mm

Features :

• Adjustable speed range: 0%-100%.
• Speed adjustment way: Potentiometer.
• Output voltage: Linear under load.
• Speed control type: Basins.
• Output voltage: Load Linear
• Type: Adjusting flow
• The motor running condition adjustment: Forward  / Stop / Reverse
• Reverse polarity protection: Yes.
• Suitable Motor: DC brush motors.