Showing 1–12 of 56 results
1.5Amp 7V-25V DC Motor Driver (4 Channels)
₹2,361.18 (Inc. GST)₹2,001.00 (+18% GST Extra)
Features:
- Bidirectional control for four (4) brushed DC motors.
- Operating Voltage: DC 7V to 25V
- Maximum Motor Current: 1.5A continuous, 2.5A peak
- Buttons for quick testing.
- LEDs for motor output state.
- PWM and DIR inputs.
- Inputs compatible with 3.3V and 5V logic (Arduino, Raspberry Pi, PLC, etc).
- Reverse polarity protection.
- Board size: 10.67cm x 5.21cm
Please Note: If this material is not available in our stock, we will arrange & ship it in 3 working days if still we unable to proceed; we will refund 100% of your payment.
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
₹96.00 (Inc. GST)₹81.36 (+18% GST Extra)
Specifications:
- Voltage range: DC6V – 28V
- Current range: Within 3A
- Switch function: None
- Speed range: 0-100%
- Dimension: 65 x 30 x 15mm
- Weight: 25 g
12V-24V 8A Adjustable Dimmer Switch For Single LED Strip
₹128.62 (Inc. GST)₹109.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 12 – 24VDC
- Operating Current: up to 8A
- Operating Temperature: -20 to 60
- Function: Can achieve stepless dimming
12V-40V 10A DC Motor PWM Speed Control Switch Governor
₹148.99 (Inc. GST)₹126.27 (+18% GST Extra)
Specification:
- Input supply voltage: DC 12V-40V
- The maximum output power: 400W
- The maximum continuous output current:8A
- Static Current:0.02 A ( Standby )
- PWM frequency: 13kHz
- Duty Cycle adjustable: 10%-100%
170W High Power H-Bridge Motor Driver Module For NMOS Brake Duty Cycle For DC 5-40V Motor 4 External NMOS Tubes Two PWM Inputs
₹1,308.62 (Inc. GST)₹1,109.00 (+18% GST Extra)
Specifications:
- With full bridge driver chip + low resistance 55V110ANMOS,
the motor can be turned forward and backward. - Two PWM inputs, dutycycle regulated in 0-100%. Instant braking ability.
- The working voltage is 10-40V and the power is below 170W
- The control is simple and convenient. Only 3 input lines are needed to control the motor
- Chip built-in dead time hardware control, more suitable for frequent reversing.
Reduce the loss of the pipe itself. - Tin plating on the back of the module. A conductor can flow through a larger current.
- Support 5V, 3..3V logical input. Suitable for all types of single-chip IO port direct control.
You can also control the positive and negative rotation of the motor by analog input. - Board size: 38.8*67.5mm
2000W DC 9V-55V 40A Motor Speed Controller Electric PWM Speed Control Regulator
₹379.96 (Inc. GST)₹322.00 (+18% GST Extra)
Specifications:
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
2000W DC 9V-55V 40A Motor Speed Controller Electric PWM Speed Control Regulator with Reversible Switch
Original price was: ₹1,121.00.₹885.00Current price is: ₹885.00. (Inc. GST)₹750.00 (+18% GST Extra)
Specifications:
- Maximum Power: 2000W
- Operating Voltage: 9-55 VDC
- Operating Current: 0-40 A
- Control Frequency: 25KHZ
20A Brushed Electronic Speed Controller
₹539.26 (Inc. GST)₹457.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 3 – 9VDC
- Output Current: 20A
- Battery Input: 2S Lipo
- Driver Frequency: 2KHz
20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
₹374.06 (Inc. GST)₹317.00 (+18% GST Extra)
Features :
- Adjustable speed range: 0%-100%.
- Speed adjustment way: Potentiometer.
- Output voltage: Linear under load.
- Speed control type: Basins.
- Output voltage: Load Linear
- Type: Adjusting flow
- The motor running condition adjustment: Forward / Stop / Reverse
- Reverse polarity protection: Yes.
- Suitable Motor: DC brush motors.
2×30 Cytron SmartDrive MDDS30 (80A Peak)
₹5,490.00 (Inc. GST)₹4,652.54 (+18% GST Extra)
Features:
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Maximum current up to 80A peak (1 second), 30A continuous, each channel.
- On board MOSFETs are switched at 18 KHz for quiet operation.
- Regenerative Braking.
2×32 Sabertooth Motor Driver
₹9,438.99 (Inc. GST)₹7,999.15 (+18% GST Extra)
Specifications:
- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
- Input modes: analog, R/C, serial (plain text or packetized), USB
- Power outputs can act as voltage clamps, brakes, or be controllable
- Size: 2.75” x 3.5” x 1.0” || 70 x 90 x 25 mm
2×5 Sabertooth Motor Driver for R/C
₹4,189.00 (Inc. GST)₹3,550.00 (+18% GST Extra)
Specifications:
- Weight: 18g / 0.6oz
- Input Voltage: 6V to 18V, 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
- 5A continuous per channel, 10A peak
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Size: 1.8” x 1.6 ” x .5” || 45 x 40 x 13 mm
- 5″ / 13cm servo pigtails