Showing 1–18 of 342 results
Motor drives are circuits used to run a motor. In other words, they are commonly used for motor interfacing. These drive circuits can be easily interfaced with the motor and their selection depends upon the type of motor being used and their ratings (current, voltage). A relay is an electrically operated switch. Many relays use an electromagnet to mechanically operate a switch, but other operating principles are also used, such as solid-state relays.
Filter by price
Motor Drivers & Relays
1 channel 12V 10A Relay Control Board Module with Optocoupler
₹67.66 (Inc. GST)₹57.34 (+18% GST Extra)
Specifications:
- Working current : 10mA
- Trigger Current :10mA
- Trigger Voltage : 12VDC
- Switching Voltage VAC : 50/60HZ 10A
- Max. Load : 2AÂ 240V AC
1 channel 12V 30A Relay Control Board Module with Optocoupler
₹153.40 (Inc. GST)₹130.00 (+18% GST Extra)
Specifications :
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
₹164.31 (Inc. GST)₹139.25 (+18% GST Extra)
Specifications:
- Part Number: G3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50\60@2A
- Isolation: Phototriac
1 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
₹145.00 (Inc. GST)₹122.88 (+18% GST Extra)
Specifications:
- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
- Zero Cross: Yes
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 channel 24V 10A Relay Control Board Module with Optocoupler
₹67.66 (Inc. GST)₹57.34 (+18% GST Extra)
Specifications:
- Working current : 12.5mA
- Trigger Current :2mA
- Trigger Voltage : 24VDC
- Switching Voltage VAC : 5060@2A
- Max. Load : 2A @240V AC
1 Channel 24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specification:
- Operating Voltage (VDC): 24
- Supply Current (A): 2mA
- Switching Voltage (VAC):50@2A
- Operating Temperature (C): -40 to 85
- Opt. Relative Humidity(RH): 20% 85%
- Storage condition (): 65 to 125
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
₹111.01 (Inc. GST)₹94.07 (+18% GST Extra)
Specifications:
- Channels: 1
- Control Voltage: 24V DC
- Relay Type: Solid State Relay (SSR)
- Load Voltage: Up to 250V AC
- Load Current: Up to 2A
- Fuse Type: Resistive Fuse
1 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specification:
- Operating Voltage (VDC): 3 ~ 24
- Supply Current (A): 2mA
- Switching Voltage (VAC):50@2A
- Operating Temperature (C): -40 to 85
- Opt. Relative Humidity(RH): 20% 85%
- Storage condition (): 65 to 125
- Length (mm): 34
- Width (mm): 26
- Height (mm): 22
- Weight (gm): 10
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
₹193.31 (Inc. GST)₹163.83 (+18% GST Extra)
Specifications:
- Operating Voltage (VDC) : 3-24V
- Supply Current (A)​ : 2mA
- Switching Voltage (VAC) : 50Hz 2A
- Operating Temperature (°C) : -40 to 85
- Opt. Relative Humidity(RH) : 20% ~ 85%
- Storage condition (℃) : – 65 to 125
1 channel 5V 10A Relay Control Board Module with Optocoupler
₹60.01 (Inc. GST)₹50.85 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel 5V 30A Relay Module with Optocoupler Isolation Supports High and Low Triger
₹408.99 (Inc. GST)₹346.61 (+18% GST Extra)
Specifications:
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
1 Channel Relay Module 12V High and Low Level Trigger Relay Control
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Specifications:
- High/Low-Level Trigger
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
1 Channel Relay Module 24V High and Low Level Trigger Relay Control
₹65.00 (Inc. GST)₹55.08 (+18% GST Extra)
Specifications:
- Peak Load of NO Connector: AC 250V/10A, DC 30V/10A
- Trigger Current: 5mA
- The Module Operating Voltage:24V
1 Channel Relay Module 30A with Optocoupler Isolation 24V Supports High and Low Triger
₹241.64 (Inc. GST)₹204.78 (+18% GST Extra)
Specifications :
- Channel: 1 channel
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 30A with Optocoupler Isolation 24V Supports High and Low Triger with Guide Rail
₹333.99 (Inc. GST)₹283.05 (+18% GST Extra)
Specifications:
- The module uses a high-quality 30A relay, normally open interface maximum load: AC 250V/30A, DC 30V/30A.
- Module operating voltage is available in 24V.
- Adopting paster OptoCoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- The module can be triggered by a jumper to set a high or low level.
- User-friendly interface design, all interfaces can be directly connected through the terminal block, which is very convenient.
1 Channel Relay Module 30A with Optocoupler, Isolation 12V High and Low Triger with Guide Rail
₹386.64 (Inc. GST)₹327.66 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 30A with Optocoupler, Isolation 5V High and Low Triger with Guide Rail
₹387.04 (Inc. GST)₹328.00 (+18% GST Extra)
Specifications:
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
1 Channel Relay Module 5V High and Low Level Trigger Relay Control
₹59.00 (Inc. GST)₹50.00 (+18% GST Extra)
Specifications:
- Peak Load of NO Connector: AC 250V/10A, DC 30V/10A
- Trigger Current: 5mA
- The Module Operating Voltage:5V