Showing 13–22 of 22 results
Filter by price
Controller
IC AT89C51
₹97.36 (Inc. GST)
₹82.50 (+18% GST Extra)
₹82.50 (+18% GST Extra)
Specifications:
- The 89c51 is compatible with MCS 51 family.
- It has 8 bit data bus and 8 bit (arithmetic logic unit).
- It has 4k bytes of on chip reprogrammable flash memory.
- It supported three level program memory lock.
- It has 16 bit of address bus and 64 kb of RAM (random access memory) and ROM (read only memory).
- It has on chip RAM 128 bytes data memory.
- It has four 8 bit bidirectional input or output ports that is 32 programmable input or output lines.
- It can execute 1 million one cycle instructions per second with a clock frequency of 12MHz.
- It has one UART programmable serial ports.
- It has six interrupts source.
- It has two multimode 16 bit timers.
- It has two level interrupts priority.
- It has power saving mode.
IC ATMEGA 8A-PU
₹99.12 (Inc. GST)
₹84.00 (+18% GST Extra)
₹84.00 (+18% GST Extra)
Specifications:
- Operating Voltage: 4.5V to 5V.
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 8 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Data retention: 20 years at 85°C/100 years at 25°C(1).
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- Extensive On-chip Debug Support.
- 8 Single-ended Channels.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
- Minimal circuit required for a complete functional project.
- Applications of ATmega8 Microcontroller:
- Multiple DIY projects.
- Projects requiring more than logical control for devices.
- Micro-controller applications for multiple device interface/Control.
N76E003AT20 IC-2Pcs
₹236.00 (Inc. GST)
₹200.00 (+18% GST Extra)
₹200.00 (+18% GST Extra)
Overview:
The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
PIC 18F4550 IC
₹678.50 (Inc. GST)
₹575.00 (+18% GST Extra)
₹575.00 (+18% GST Extra)
Specifications:
- CPU:8-bit
- Total Number of Pins:40
- Operating Voltage:+4.0 to +5.5 V (+5.5V being absolute maximum)
- Number of programmable I/O pins:35
- CPU Speed:12 MIPS
- RAM Bytes:2KBytes
- EEPROM:256Bytes
- Watchdog Timer:Programmable Watchdog Timer with Separate On-chip Oscillator
- External Oscillator:Up to 48MHz
- Internal Oscillator:32KHz-8MHz Calibrated Internal Oscillator
PIC16F877A Micro-controller IC
₹330.40 (Inc. GST)
₹280.00 (+18% GST Extra)
₹280.00 (+18% GST Extra)
PIC16F886 Microcontroller IC
₹182.90 (Inc. GST)
₹155.00 (+18% GST Extra)
₹155.00 (+18% GST Extra)
Specifications:
- CPU: 8-bit
- Total pins: 28
- Programmable pins: 24
- Communication Interface:
- SPI Serial Interface(7,14,15,16 PINS) [Can be used for programming this controller]
- UART Interface(17,18 PINS) [Can be used for programming this controller]
- Two-wire Serial Interface or I2C(14,15 PINS) [Can be used to connect sensors and LCDs]
- ICSP or In-Circuit Serial Programming Interface (27,28 Pins) [Can be used for programming this controller]
- ADC Feature: 11channels of 10-bit resolution
- Timer Feature: One 8-bit counter, Two 16-bit counter
- Analog Comparators: 2
- PWM channels: 4
- External Oscillator: Up to 20MHz
- Internal Oscillator: 31KHz-8MHz Internal R-C Oscillator featured with:
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 31 kHz
- Software tunable
- Crystal fail detect for critical applications
- Clock mode switching during operation for power savings
- Program memory / Flash memory: 16Kbytes[100000 write/erase cycles]
- CPU Speed: 1MIPS @ 1MHz
- RAM: 368Bytes
- EEPROM: 256Bytes
- Watchdog Timer: Programmable Watchdog Timer with separate on-chip oscillator
- Power Save Modes: Available
- Operating Voltage: 2.0V to 5.5V
- Maximum current to any I/O pin: IN :25mA |Â OUT : 25mA
- Operating Temperature: -40°C to +125°C
STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCU
₹88.50 (Inc. GST)
₹75.00 (+18% GST Extra)
₹75.00 (+18% GST Extra)
Features:
- CRC calculation unit
- 4 to the 32MHz Crystal oscillator
- 32kHz Oscillator for RTC with calibration
- Internal 8MHz RC with x6 PLL option
- Internal 40kHz RC oscillator
- 0 to 3.6V Conversion range
- 2.4 to 3.6V Separate analog supply
- Independent and system watchdog timers
- SysTick timer
- Communication interfaces
- Serial wire debug (SWD)
STM32F103C8T6 Microcontroller IC
₹584.10 (Inc. GST)
₹495.00 (+18% GST Extra)
₹495.00 (+18% GST Extra)
Specifications:
- Operating voltage range from 2V to 3.6V
- 64Kbytes of flash memory
- 20Kbytes of SRAM
- CRC calculation unit, 96bit unique ID
- Two 12bit, 1µs A/D converter (up to 10 channels)
- 7 channel DMA controller, 3 general-purpose timer and 1 advanced control timer
- 37 fast I/O ports
- Serial wire debug (SWD) and JTAG interfaces
- Two SPI, two I2C, three USART, one USB and one CAN interfaces
- Ambient operating temperature range from -40°C to 85°
STM32F405RGT6 IC
₹737.50 (Inc. GST)
₹625.00 (+18% GST Extra)
₹625.00 (+18% GST Extra)
Specifications :
- Operating frequency: 168 MHz
- Power supply voltage (DC): 1.80V (min)to  3.6 V(max)
- Operating voltage: 1.8V ~ 3.6V
- Pins: 64
- RAM size: 196 KB
- Bits: 32
- FLASH memory capacity: 1024 KB
- Analog to Digital Conversion (ADC): 3
- Input/output number: 51 Input
- ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10)
W78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – Nuvoton
₹97.39 (Inc. GST)
₹82.53 (+18% GST Extra)
₹82.53 (+18% GST Extra)