Showing all 22 results

Controller

ATmega 16A-PU PDIP-40 Microcontroller

254.30 (Inc. GST)
215.50 (+18% GST Extra)

Specifications :

  • Advanced RISC Architecture.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 16 MIPS Throughput at 16 MHz.
  • Advanced RISC Architecture.
  • On-chip 2-cycle Multiplier.
  • High Endurance Non-volatile Memory segments.
  • 16 Kbytes of In-System Self-programmable Flash program memory.
  • 512 Bytes EEPROM.
  • 1 Kbyte Internal SRAM.
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
  • Optional Boot Code Section with Independent Lock Bits.
  • In-System Programming by On-chip Boot Program.
  • True Read-While-Write Operation.
  • Programming Lock for Software Security.
  • JTAG (IEEE std. 1149.1 Compliant) Interface.
  • Boundary-scan Capabilities According to the JTAG Standard.
  • Extensive On-chip Debug Support.
  • Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
  • Peripheral Features.
  • Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
  • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
  • Real Time Counter with Separate Oscillator.
  • Four PWM Channels.
  • 8-channel, 10-bit ADC.
  • 8 Single-ended Channels.
  • 7 Differential Channels in TQFP Package Only.
  • 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
  • Byte-oriented Two-wire Serial Interface.
  • Programmable Serial USART.
  • Master/Slave SPI Serial Interface.
  • Programmable Watchdog Timer with Separate On-chip Oscillator.
Sold out

ATmega 32A-AU / ATmega32A U-TH (SMD Package) TQFP-44 PIN Microcontroller

338.66 (Inc. GST)
287.00 (+18% GST Extra)
Features:
  1. Advanced RISC architecture
  2. 131 Powerful instructions
  3. Fully static operation
  4. Up to 16MIPS throughput at 16MHz
  5. On-chip 2-cycle multiplier
  6. High endurance non-volatile memory segments
  7. Optional boot code section with independent lock bits
  8. In-system programming by the on-chip boot program
  9. True Read-While-Write operation
  10. Programming lock for software security

Atmega328 U IC Micro-controller

147.50 (Inc. GST)
125.00 (+18% GST Extra)

Specifications:

  1. 131 powerful instructions – Most Single Clock Cycle Execution
  2. 32 x 8 general-purpose working registers
  3. Fully static operation
  4. Up to 20MIPS throughput at 20MHz
  5. On-chip 2-cycle multiplier
  6. Write/erase cycles: 10,000 flash/100,000 EEPROM
  7. Optional boot code section with independent lock bits
  8. In system programming by on-chip boot program
  9. True read while write operation
  10. Programming lock for software security
  11. Two 8-bit timer/counters with separate prescaler and compare mode
  12. One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
  13. Real-time counter with separate oscillator

ATmega328P AU TQFP-32 Microcontroller

178.18 (Inc. GST)
151.00 (+18% GST Extra)

Specifications:

  • High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
  • Advanced RISC Architectur
  • High Endurance Non-volatile Memory Segments
  • Atmel® QTouch® library support
  • Peripheral Features
  • Special Microcontroller Features

ATmega328P U-TH Microcontroller

274.94 (Inc. GST)
233.00 (+18% GST Extra)

Features: 

  1. High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family
  2. Advanced RISC Architecture
  3. High Endurance Non-volatile Memory Segments
  4. Atmel® QTouch® library support
  5. Peripheral Features
  6. Special Microcontroller Features

Atmega328P-U IC Micro-controller

531.00 (Inc. GST)
450.00 (+18% GST Extra)

Specifications:

  • 131 powerful instructions – Most Single Clock Cycle Execution
  • 32 x 8 general-purpose working registers
  • Fully static operation
  • Up to 20MIPS throughput at 20MHz
  • On-chip 2-cycle multiplier
  • Write/erase cycles: 10,000 flash/100,000 EEPROM
  • Optional boot code section with independent lock bits
  • In system programming by on-chip boot program
  • True read while write operation
  • Programming lock for software security
  • Two 8-bit timer/counters with separate prescaler and compare mode
  • One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
  • Real-time counter with separate oscillator

ATMega32A Microcontroller IC

212.40 (Inc. GST)
180.00 (+18% GST Extra)
Features:
  1. Advanced RISC architecture
  2. 131 Powerful instructions
  3. Fully static operation
  4. Up to 16MIPS throughput at 16MHz
  5. On-chip 2-cycle multiplier
  6. High endurance non-volatile memory segments
  7. Optional boot code section with independent lock bits
  8. In-system programming by the on-chip boot program
  9. True Read-While-Write operation
  10. Programming lock for software security

ATmega8A AU TQFP-32 Microcontroller

234.82 (Inc. GST)
199.00 (+18% GST Extra)

Features:

  1. Advanced RISC architecture – On-chip 2-cycle multiplier
  2. High endurance, non-volatile memory segments
  3. QTouch® library support – Capacitive touch buttons, sliders, and wheels
  4. Peripheral features – Byte-oriented Two-Wire serial interface
  5. Power-on reset (POR) and programmable brown-out detection
  6. Internal Calibrated RC oscillator
  7. External and internal interrupt sources
  8. Five sleep modes – Idle, ADC noise reduction, power-save, power-down, and standby

ATmega8A U PDIP-28 Microcontroller

197.06 (Inc. GST)
167.00 (+18% GST Extra)

Specifications:

  1. Advanced RISC Architecture.
  2. Up to 16 MIPS Throughput at 16 MHz.
  3. On-chip 2-cycle Multiplier.
  4. Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
  5. Programming Lock for Software Security.
  6. Programmable Serial USART.
  7. Applications of ATmega8 Microcontroller:
  8. Useful for Multiple DIY projects.

Atmel ATMEGA32U4-AUR SMD IC

1,239.00 (Inc. GST)
1,050.00 (+18% GST Extra)

Specifications:

  • Manufacturer : Microchip
  • Product Category : 8-bit Microcontrollers – MC
  • Mounting Style :  SMD/SMT
  • Package/Case : TQFP-44
  • Package/Case:
  • Series : ATmega32U4
  • Core : AVR
  • Data Bus Width : 8 bit
  • Maximum Clock Frequency : 16 MHz
  • Program Memory Size : 32 kB
  • Data RAM Size : 2.5 kB
  • Number of ADC Channels : 12
  • Number of Timers/Counters : 4 Timer
  • Interface Type : JTAG, SPI, TWI, USART, USB
  • Data RAM Type : SRAM
  • Data ROM Size : 1 kB
  • Data ROM Type : EEPROM
  • Number of I/Os : 26 I/O
  • Processor Series : megaAVR
  • Operating Supply Voltage  : 2.7 V to 5.5 V
  • ADC Resolution : 10 bit
  • Minimum Operating Temperature : – 40 C
  • Maximum Operating Temperature : + 85 C
  • Program Memory Type : Flash
  • Unit Weight : 273.300 mg

ATtiny85 IC

206.50 (Inc. GST)
175.00 (+18% GST Extra)

Features:

  • Flash (Kbytes): 8 Kbytes
  • Pin Count: 8
  • Max. Operating Freq. (MHz): 20 MHz
  • CPU: 8-bit AVR
  • Number of Touch Channels: 3
  • Hardware QTouch Acquisition: No
  • Max I/O Pins: 6
  • Ext Interrupts: 6
  • USB Interface:No

ATtiny85 20SU 8-bit Micro controller

141.60 (Inc. GST)
120.00 (+18% GST Extra)
Specifications:
  1. ATtiny85
  2. AVR
  3. 8 bit
  4. 20 MHz
  5. 8 kB
  6. 512 B
  7. 10 bit
  8. 6 I/O
  9. 2.7 V to 5.5 V

IC AT89C51

97.36 (Inc. GST)
82.50 (+18% GST Extra)

Specifications:

  • The 89c51 is compatible with MCS 51 family.
  • It has 8 bit data bus and 8 bit (arithmetic logic unit).
  • It has 4k bytes of on chip reprogrammable flash memory.
  • It supported three level program memory lock.
  • It has 16 bit of address bus and 64 kb of RAM (random access memory) and ROM (read only memory).
  • It has on chip RAM 128 bytes data memory.
  • It has four 8 bit bidirectional input or output ports that is 32 programmable input or output lines.
  • It can execute 1 million one cycle instructions per second with a clock frequency of 12MHz.
  • It has one UART programmable serial ports.
  • It has six interrupts source.
  • It has two multimode 16 bit timers.
  • It has two level interrupts priority.
  • It has power saving mode.

IC ATMEGA 8A-PU

99.12 (Inc. GST)
84.00 (+18% GST Extra)

Specifications:

  • Operating Voltage: 4.5V to 5V.
  • Advanced RISC Architecture.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 16 MIPS Throughput at 16 MHz.
  • On-chip 2-cycle Multiplier.
  • High Endurance Non-volatile Memory segments.
  • 8 Kbytes of In-System Self-programmable Flash program memory.
  • 512 Bytes EEPROM.
  • 1 Kbyte Internal SRAM.
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
  • Data retention: 20 years at 85°C/100 years at 25°C(1).
  • Optional Boot Code Section with Independent Lock Bits.
  • In-System Programming by On-chip Boot Program.
  • True Read-While-Write Operation.
  • Programming Lock for Software Security.
  • Extensive On-chip Debug Support.
  • 8 Single-ended Channels.
  • Byte-oriented Two-wire Serial Interface.
  • Programmable Serial USART.
  • Master/Slave SPI Serial Interface.
  • Programmable Watchdog Timer with Separate On-chip Oscillator.
  • Minimal circuit required for a complete functional project.
  • Applications of ATmega8 Microcontroller:
  • Multiple DIY projects.
  • Projects requiring more than logical control for devices.
  • Micro-controller applications for multiple device interface/Control.

N76E003AT20 IC-2Pcs

236.00 (Inc. GST)
200.00 (+18% GST Extra)

Overview:

The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.

PIC 18F4550 IC

678.50 (Inc. GST)
575.00 (+18% GST Extra)

Specifications:

  • CPU:8-bit
  • Total Number of Pins:40
  • Operating Voltage:+4.0 to +5.5 V (+5.5V being absolute maximum)
  • Number of programmable I/O pins:35
  • CPU Speed:12 MIPS
  • RAM Bytes:2KBytes
  • EEPROM:256Bytes
  • Watchdog Timer:Programmable Watchdog Timer with Separate On-chip Oscillator
  • External Oscillator:Up to 48MHz
  • Internal Oscillator:32KHz-8MHz Calibrated Internal Oscillator

PIC16F877A Micro-controller IC

330.40 (Inc. GST)
280.00 (+18% GST Extra)

Specifications:

  • Program Memory Type: Flash
  • ADC Input: 8 ch, 10-bit
  • Operating Voltage Range (V): 2.5V to 5V
  • Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)

PIC16F886 Microcontroller IC

182.90 (Inc. GST)
155.00 (+18% GST Extra)

Specifications:

  • CPU: 8-bit
  • Total pins: 28
  • Programmable pins: 24
  • Communication Interface:
    • SPI Serial Interface(7,14,15,16 PINS) [Can be used for programming this controller]
    • UART Interface(17,18 PINS) [Can be used for programming this controller]
    • Two-wire Serial Interface or I2C(14,15 PINS) [Can be used to connect sensors and LCDs]
    • ICSP or In-Circuit Serial Programming Interface (27,28 Pins) [Can be used for programming this controller]
  • ADC Feature: 11channels of 10-bit resolution
  • Timer Feature: One 8-bit counter, Two 16-bit counter
  • Analog Comparators: 2
  • PWM channels: 4
  • External Oscillator: Up to 20MHz
  • Internal Oscillator: 31KHz-8MHz Internal R-C Oscillator featured with:
    • Factory calibrated to ±1%
    • Software selectable frequency range of 8 MHz to 31 kHz
    • Software tunable
    • Crystal fail detect for critical applications
    • Clock mode switching during operation for power savings
  • Program memory / Flash memory: 16Kbytes[100000 write/erase cycles]
  • CPU Speed: 1MIPS @ 1MHz
  • RAM: 368Bytes
  • EEPROM: 256Bytes
  • Watchdog Timer: Programmable Watchdog Timer with separate on-chip oscillator
  • Power Save Modes: Available
  • Operating Voltage: 2.0V to 5.5V
  • Maximum current to any I/O pin: IN :25mA | OUT : 25mA
  • Operating Temperature: -40°C to +125°C

STM32F030F4P6 TSSOP-20 ARM Microcontroller-MCU

88.50 (Inc. GST)
75.00 (+18% GST Extra)

Features:

  1. CRC calculation unit
  2. 4 to the 32MHz Crystal oscillator
  3. 32kHz Oscillator for RTC with calibration
  4. Internal 8MHz RC with x6 PLL option
  5. Internal 40kHz RC oscillator
  6. 0 to 3.6V Conversion range
  7. 2.4 to 3.6V Separate analog supply
  8. Independent and system watchdog timers
  9. SysTick timer
  10. Communication interfaces
  11. Serial wire debug (SWD)

STM32F103C8T6 Microcontroller IC

584.10 (Inc. GST)
495.00 (+18% GST Extra)

Specifications:

  1. Operating voltage range from 2V to 3.6V
  2. 64Kbytes of flash memory
  3. 20Kbytes of SRAM
  4. CRC calculation unit, 96bit unique ID
  5. Two 12bit, 1µs A/D converter (up to 10 channels)
  6. 7 channel DMA controller, 3 general-purpose timer and 1 advanced control timer
  7. 37 fast I/O ports
  8. Serial wire debug (SWD) and JTAG interfaces
  9. Two SPI, two I2C, three USART, one USB and one CAN interfaces
  10. Ambient operating temperature range from -40°C to 85°

STM32F405RGT6 IC

737.50 (Inc. GST)
625.00 (+18% GST Extra)

Specifications :

  • Operating frequency: 168 MHz
  • Power supply voltage (DC): 1.80V (min)to  3.6 V(max)
  • Operating voltage: 1.8V ~ 3.6V
  • Pins: 64
  • RAM size: 196 KB
  • Bits: 32
  • FLASH memory capacity: 1024 KB
  • Analog to Digital Conversion (ADC): 3
  • Input/output number: 51 Input
  • ARM® Cortex®-M4 STM32F4 Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10×10)

W78E052DDG – 8K Flash – 8052 Core Microcontroller – 40P DIP – Nuvoton

97.39 (Inc. GST)
82.53 (+18% GST Extra)

Specifications:

  1. 6T/12T 8051 processor
  2. Max frequency of 40 MHz
  3. Operating voltage: 2.4V to 5.5V
  4. Temperature range: -40℃ ~ 85℃
  5.  8 KB of flash memory
  6. 256B of SRAM
  7. ISP (In-System Programming)