Showing 61–72 of 286 results
DHT11 Module Base PCB- iRobotics
₹47.20 (Inc. GST)₹40.00 (+18% GST Extra)
Specifications:
- PCB Name : DHT11 Module
- Layer : Single Layer
- PCB Material: Glass  Epoxy
- Fire Retardant
- Weight: 8 g.
Digi XBee3, 2.4 GHz ZB 3.0, PCB Antenna, TH MT
₹2,498.06 (Inc. GST)₹2,117.00 (+18% GST Extra)
Features:
- Serial Data Interface: Uart, Spi, I2c
- Configuration Method:Â API Or At Commands, Local Or Over-the-air (Ota)
- Frequency Band: ISM 2.4 GHz
- Form Factor: Micro, Through-hole, Surface Mount
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
- Antenna Options:
- Through-hole: Pcb Antenna, U.fl Connector, RP-SMA Connector
- Smt: Rf Pad, Pcb Antenna, Or U.fl Connector
- Micro: U.fl Antenna, Rf Pad, Chip Antenna
- Operating Temperature -40º C To +85º C
Digital Vernier Caliper 150mm With Bluetooth & IP67 Waterproof
₹6,490.00 (Inc. GST)₹5,500.00 (+18% GST Extra)
Specifications:
- Connectivity: Bluetooth
- IP67 (Water Proof)
- Digital Display
- Easy to use
- High Quality – Industrial Grade
DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266
₹283.20 (Inc. GST)₹240.00 (+18% GST Extra)
Specifications:
- Derived from ESP8266, ESP8285 has a flash memory of 1MB
- Operating Voltage: 3.3V
- Totally compatible with ESP8266
- Wi-Fi support 802.11 b/g/n/e/i
- High temperature resistant, working temperature: -40℃-125℃
ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner
₹304.44 (Inc. GST)₹258.00 (+18% GST Extra)
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
ESP Prog – CP2102 Based ESP32 Programming Tool
₹613.60 (Inc. GST)₹520.00 (+18% GST Extra)
Specifications:
- Size: 50mmx30mm
- USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable.
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V are available on the O/P connector
- All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))
ESP-01 Adapter 3.3V 5V Board
₹57.82 (Inc. GST)₹49.00 (+18% GST Extra)
Specifications:
- The on-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
₹104.90 (Inc. GST)₹88.90 (+18% GST Extra)
Specifications:
- Module Type: ESP-01 ESP8266
- Function: Wireless transceiver module for Wi-Fi connectivity
- Features: Serial communication interface
- Usage: Provides Wi-Fi connectivity to microcontrollers or devices via UART (Universal Asynchronous Receiver-Transmitter) communication
- Compatibility: Widely used with microcontrollers for IoT (Internet of Things) projects and various DIY electronics applications
- Capabilities: Enables devices to connect to Wi-Fi networks, facilitating data transmission and communication over Wi-Fi.
ESP-12F ESP8266 Wifi Wireless IoT Board Module
₹202.96 (Inc. GST)₹172.00 (+18% GST Extra)
Specifications:
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
ESP-12F ESP8266 Wifi Wireless IoT Board Module
₹116.01 (Inc. GST)₹98.31 (+18% GST Extra)
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
ESP-32S Wi-fi Bluetooth Combo Module
₹261.99 (Inc. GST)₹222.03 (+18% GST Extra)
Features:
- CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
- 448 KByte ROM
- 520 KByte SRAM
- 16 KByte SRAM in RTC.
- QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
- Supply Voltage: 3V~3.6V
ESP-WROOM-32 WIFI Bluetooth Networking Smart Component Development Board – 30 Pins
₹409.46 (Inc. GST)₹347.00 (+18% GST Extra)
Specifications:
- Ultra-low-power management.
- 4 MB Flash.
- Current:Â 80 mA.
- Supply Voltage: 3.0Â V ~ 3.6 V.
- Data Rate: 150Â Mbps.
- Frequency:Â 2.4 GHz.