Showing 163–171 of 286 results
Filter by price
Wireless Modules
Mini USB wireless Network Card 150Mbps Wi-fi Dongle
₹354.00 (Inc. GST)
₹300.00 (+18% GST Extra)
₹300.00 (+18% GST Extra)
Specifications :
- Dynamic data rate : 802.11b : 1,2,5.5,11Mbps;
- 802.11g : 6,9,12,18,24,36,48,54Mbps;
- 802.11n: (20MHz)MCS0-7, up to 72 Mbps;
- Â (40MHz)MCS0-7, up to 150 Mbps;
- Security support for 64/128 WEP, WPA, WPA2, WAPI.
- Operates in 2.4GHz frequency band.
- Drivers support multiple operation systems.
MT76813DBI ESP8266 Serial WIFI wireless Gain Antenna
₹68.99 (Inc. GST)
₹58.47 (+18% GST Extra)
₹58.47 (+18% GST Extra)
NEO-M8N GPS Module with Ceramic Active Antenna
₹1,113.92 (Inc. GST)
₹944.00 (+18% GST Extra)
₹944.00 (+18% GST Extra)
NodeMcu ESP8266 CH340 V3 Lua Wifi Board
₹195.88 (Inc. GST)
₹166.00 (+18% GST Extra)
₹166.00 (+18% GST Extra)
Specifications:
- Lowest cost WI-FI
- Flash size: 4MByte
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
NodeMCU ESP8266 CP2102
₹299.01 (Inc. GST)
₹253.39 (+18% GST Extra)
₹253.39 (+18% GST Extra)
- Lowest cost WI-FI
- Integrated low power 32-bit CPU
- Arduino-like hardware IO
- Upload codes from the Arduino IDE
- Wi-Fi Module – ESP-12E module similar to ESP-12 module but with 6 extra GPIOs.
- USB – micro USB port for power, programming and debugging
- Headers – 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Flash Memory(Mb):4
- Support:SDIO 1.1/2.0, SPI, UART
- Length (mm):49
- Width (mm):24
- Height (mm):13
- Weight (gm):8
- Misc – Reset and Flash buttons
- Power – 5V via micro USB port
- Dimensions – 49 x 24.5 x 13mm
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
₹197.06 (Inc. GST)
₹167.00 (+18% GST Extra)
₹167.00 (+18% GST Extra)
Specifications:
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Small and Handy module.
- The spacing between mounting headers is 25.5 mm.
- It uses Lua scripting language programming.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- USB power output only for NodeMCU v3
NRF 24L01 Module Long Range
₹68.01 (Inc. GST)
₹57.63 (+18% GST Extra)
₹57.63 (+18% GST Extra)
Features :
- NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz
- Wireless transceiver including: Frequency generator, enhanced type, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator
- The output power channel selection and protocol settings can be set extremely low current consumption, through the SPI interface
- As the transmit mode, the transmit power is 6dBm, the current is 9.0mA, the accepted mode current is 12.3mA, the current consumption of the power-down mode and standby mode are lower
- Built-in 2.4GHz antenna, supports up to six channels of data reception
- Size: 15 x 29mm
- Low operating voltage: 1.9-3.6V
- 125 channels, multi-point communication and frequency hopping to meet the communication needs
- High Rate: 2Mbps, as air transmission time is very short, greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps)
- Low power consumption: When the answer mode communication, fast air transmission and start-up time, which greatly reduces the current consumption
- Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol, such as: automatic retransmission of lost packets and automatically generate response signals, etc.
- NRF24L01 SPI interface: hardware SPI port, MCU I/O ports
- Internal FIFO compatible with a variety of microprocessor interface, micro-controller is convenient
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
₹140.00 (+18% GST Extra)
Specification :
- Voltage: 3-3.6V
- Max output power: +20 dBm
- Working current in transmit mode: 115mA
- Working current in receiver mode: 45mA
- Current in  mode: 4.2uA
- Operating temperature: -20-70 degree
- Receiver sensitivity: -92dBm in 2Mbps mode, -95dBm in 1Mbps mode, -104dBm in 250kbps mode
- PA growth: 20dB
- LAN growth: 10dB
- LAN noise figure: 2.6dB
- Antenna growth: 2dBI
- 2M rate: 520m
NRF51822 Beacon Module Bluetooth RSSI Positioning Module
₹942.82 (Inc. GST)
₹799.00 (+18% GST Extra)
₹799.00 (+18% GST Extra)
Specifications:
- Easy and fast customization of extremely low cost enclosures;
- UUID, Major, Minor and other parameters can be changed according to customer needs;
- Beacon barcode for easy identification;
- Based on TI's NorDic51822/CR2032, low power Bluetooth module;
- Support IOS7.0, Android 4.3 and above;
- Receiving: 30M;
- Battery life is 6 months to one year.
- Working voltage: 1.8-3.6V