Showing 1–9 of 18 results
Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk
Original price was: ₹191.99.₹175.01Current price is: ₹175.01. (Inc. GST)₹148.31 (+18% GST Extra)
Specifications:
- Color: Black
- Material: Glass fiber
- Suit for different open-source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
- Package Weight:Â 24 gm.
APM 2.8 Flight Controller with Built in Compass
₹6,643.40 (Inc. GST)₹5,630.00 (+18% GST Extra)
Specifications :
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
CC3D OpenPilot EVO Flight Controller with Side Pins
₹1,090.32 (Inc. GST)₹924.00 (+18% GST Extra)
Specifications :
- with a function of being directly plugged into the satellite receiver(It needn’t conversion cable)
- Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
Damping Plate Shock Absorber for CC3D Flip32 Naze32 Mini APM Flight controller
₹199.00 (Inc. GST)₹168.64 (+18% GST Extra)
Specifications:
- Color: Black
- Material: Plastic and Rubber
- Weight: 15 gm
- Suit for different open source CC3D flight controller, Naze32, Mini APM or other mini flight control
DJI NAZA-M Lite V1.1 with GPS Kit
₹10,509.08 (Inc. GST)₹8,906.00 (+18% GST Extra)
Specifications :
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
₹1,404.20 (Inc. GST)₹1,190.00 (+18% GST Extra)
Specifications:
- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver
₹5,948.38 (Inc. GST)₹5,041.00 (+18% GST Extra)
- FS-i6S Transmitter:Â
- No. of Channel: 10
- Frequency Range: 2.4055 – 2.475GHz
- Band Width: 500KHz
- Band Number: 140
- Transmitting Power: <20dbm
- 2.4G Mode:Â AFHDS 2A
- Modulation System: GFSK
- FS-iA10B Receiver:
- No. of Channel: 10
- Frequency Range: 2.4055 – 2.475GHz
- Band Number: 140
- Receiver Sensitivity: -105dbm
- 2.4G Mode:Â AFHDS 2A
- Modulation System: GFSK
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
₹5,970.80 (Inc. GST)₹5,060.00 (+18% GST Extra)
Specifications :
- IC: Atmega644 PA
- GYRO/ACC.: 6050MPU Inven Sense Inc.
- Input voltage: 4.8V-6.0V.
- AVR interface: Standard 6 Pin.
- The signal from receiver: 1520us(5 channels).
- Signal to ESC: 1520us.
Naze32 6DOF Flight Control board
₹1,239.00 (Inc. GST)₹1,050.00 (+18% GST Extra)
Specifications:
- Battery voltage monitoring.
- Built-in FrSky telemetry converter.
- Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
- Onboard USB for setup and configuration.
- Modern GUI for all operating systems, Baseflight Configurator.