Showing 46–54 of 451 results
150MM, 5mm/s, 6000N, 12V Linear Actuator
₹4,661.00 (Inc. GST)₹3,950.00 (+18% GST Extra)
Specification:
- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 6000N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built-in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
₹620.00 (Inc. GST)₹525.42 (+18% GST Extra)
- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
15RPM 59TYD-375-2B AC Synchronous Motor
₹1,156.40 (Inc. GST)₹980.00 (+18% GST Extra)
Specifications:
- Model: 59-TYD-375-2B
- Speed: 15 RPM
- shaft diameter :- 8mm
- Power: 13W
- Input: 220V 50Hz
- Max output torque – 60 kgcm.
- Weight – 500 g. approx
2 Phase 12Nm JK86HSN120 Easy Servo Motor with HSD57 Hybrid Servo Driver
₹16,520.00 (Inc. GST)₹14,000.00 (+18% GST Extra)
Specifications:
- Driver Type: Hybrid servo driver
- Motor serial : JK86HSN120BK
-
Inductance : 3.8m.H
-
Resistance : 0.36ohm
- Step Angle(degrees) : 1.8 Degree
- Shaft : 14mm D Shaft
- Rated Voltage : 1.66V
- Rated Current : 4.2A
- Phase Resistance : 0.4ohm
- Phase Inductance : 1.5 mH (1kHz 1V RMS)
- Holding Torque :Â 0.4-12n.M
- Usage : CNC
2 Phase 4.5Nm JK86HSN45 Easy Servo Motor with HSD86 Hybrid Servo Driver
₹12,980.00 (Inc. GST)₹11,000.00 (+18% GST Extra)
Specifications:
      JK86HSN45 Easy Servo Motor:
- Motor Type: 2-phase hybrid stepper motor with built-in encoder
- Holding Torque: 4.5 Nm (Newton-meters)
- Step Angle: 1.8 degrees per step
- Phase: 2-phase (bipolar)
- Rated Voltage: Typically 3.36 VDC
- Rated Current: Varies based on application and voltage
- Shaft Diameter: Standard size compatible with various coupling mechanisms
- Encoder Resolution: Typically a high-resolution encoder for accurate position feedback
- Frame Size: Standard NEMA frame size, e.g., NEMA 34
- Mounting: Typically includes standard mounting holes for easy integration
- Insulation Class: Generally designed for Class B or higher insulation
- Operating Temperature: Suitable for various operating environments
- Construction: Rugged construction for durability and reliable performance
- Connector: Equipped with a compatible connector for wiring
2 Phase 4Nm JK60HSN40 Easy Servo Motor with HSD57 Hybrid Servo Driver
₹10,030.00 (Inc. GST)₹8,500.00 (+18% GST Extra)
Specifications:
- Type : Hybrid
- Step Angle(degrees) : 1.8 Degree
- Shaft : 14mm D Shaft
- Rated Voltage : 1.66V
- Rated Current : 4.2A
- Phase Resistance : 0.4ohm
- Phase Inductance : 1.5 mH (1kHz 1V RMS)
- Holding Torque :Â 12 Kg.cm
- Weight : 0.68kg
- Usage : CNC
200 RPM BO Motor Single Side Shaft
₹82.98 (Inc. GST)₹70.32 (+18% GST Extra)
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Single D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 200 RPM
- Rated Torque: 0.45 Kgcm
200 RPM Centre Shaft DC White Gearbox Motor
₹156.94 (Inc. GST)₹133.00 (+18% GST Extra)
Specifications:
- Operating Voltage : 12V
- No-load current : 800mA
- Load current : upto 7.5A(Max)
- Base motor : 18000RPM
- Shaft Diameter : 6 mm shaft with M3 thread hole
- Gearbox diameter : 37mm
- Motor Diameter : 28.5mm
- Length : 63mm without shaftShaft length : 30mm
- Weight : 180gm
- Rated Torque : 1.5 kgcm
- Stall Torque : 5.4 kgcm
200 RPM I-Type Dual Side Shaft Bo Motor
₹82.60 (Inc. GST)₹70.00 (+18% GST Extra)
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 200 RPM
- Rated Torque: 0.35 Kgcm