Showing 277–288 of 342 results

Motor Drivers & Relays

Sold out

SmartElex 15D Dual Channel DC Motor Driver

1,998.92 (Inc. GST)
1,694.00 (+18% GST Extra)

Specifications:

  1. Support motor voltage from 7V to 28V.
  2. Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.
  3. Overcurrent and Thermal protection.
  4. Multiple input modes: RC, Analog, PWM, Serial Packetized.
  5. On board push buttons for test and manual operation.

SmartElex 15S DC Motor Driver 15A (30A Peak)

767.00 (Inc. GST)
650.00 (+18% GST Extra)

Specifications:

  1. Supply Voltage: 6.8-30 VDC.
  2. Continuous Current: 15 Amp.
  3. PWM Frequency: 20 KHz.
  4. Max Peak current: 30 Amp(For 10 Seconds).
  5. One brushed DC motor Bidirectional control.

Smoother Module for Stepper Driver Motor V1.0

147.50 (Inc. GST)
125.00 (+18% GST Extra)
Specifications:
  • Minimum operating voltage: 8V
  • Maximum operating voltage: 35V
  • Continuous current per phase: 1 Amp
  • Maximum current per phase: 2 Amp
  • Minimum logic voltage: 3V
  • Maximum logic voltage: 5.5V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
  • Reverse voltage protection?: No

Solar Tracking Module Automatic Tracker Single Axis Solar Tracking Module Search Light Solar-powered Automatic Tracker Board – Single Directional

Original price was: ₹649.00.Current price is: ₹579.95. (Inc. GST)
491.49 (+18% GST Extra)
Specifications: 
  • Name: Single-axis light source tracking board
  • Size: 35*16*1.2mm
  • Voltage: 5-5.5VDC
  • Current: <1.5A
  • Interface: Power + - Motor M
  • Principle: Use an obstruction on the photoresistor. When the light strikes the obstruction to form a shadow, and the light on one side forms a difference with the other side, the motor is controlled to find the balance point, that is, the center of the light source.
  • Line length: 15CM

Solid State Relay G3MB-202P-5VDC 4 Pin 2A 240VAC SSR

75.00 (Inc. GST)
63.56 (+18% GST Extra)
Specifications :
  • Small Size and Easier to use
  • Fast Switching rate and Low response time
  • Can be controlled by a microcontroller
  • Can Support upto 2A of continuous current
 

SONGLE 8 Channel Relay Module 12V High and Low Level Trigger Relay Control

389.00 (Inc. GST)
329.66 (+18% GST Extra)
Features:
  • Maximum load: AC 250V/10A, DC 30V/10A.
  • The chip optocoupler isolation, strong driving ability, stable performance, and trigger current 5mA.
  • The working voltage is 12V.
  • Each channel of the module can be set up by a high jumper or low-level trigger.
  • Fault-tolerant design, even if the control line is broken, the relay will not act.
  • Power indicator (green), 8 relay status indicator (red).
  • The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
  • Module size: 142mm x 50mm x 18.5mm (length x width x height).
  • There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm.

SONGLE 8 Channel Relay Module 5V High and Low Level Trigger Relay Control

425.01 (Inc. GST)
360.17 (+18% GST Extra)

Specifications:

  • Number of channel: 8
  • Maximum Output Current Rating: 10A
  • Maximum Output Voltage Rating: AC 250V / DC 30V
  • Input power source: 5V DC (160MA)
  • Input control signal: Selectable by jumper plug, Low level trigger (PNP) or High level trigger (PNP)
  • 5V 1 channel relay interface board
  • Selectable high level trigger or low level trigger
  • Build in Opto-Isolator IC for protection
  • With blue KF301 terminal, more convenient for connection
  • Can control various appliances with large current and high voltage
  • Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
  • Size: 140x52x19mm
  • Weight: 110g

Songle Single-Channel 12V 30A Relay Module Power Failure Relay High Level

162.01 (Inc. GST)
137.29 (+18% GST Extra)

Specifications:

  • Voltage version: 12V
  • The static current: 5mA
  • Working current: 190mA
  • Trigger current: 2-4mA
  • The module can be set high-level or low-level trigger by the jumper
  • The rated current of the interface is 16A

Songle Single-Channel 24V 30A Relay Module

231.00 (Inc. GST)
195.76 (+18% GST Extra)
Specification : 
  • Operating voltage: 24V
  • Module size: 50mm x 33mm x 24mm (length * width * height)
  •  4 fixed bolt holes, holes 3.1mm, spacing 44.5mm x 27.5mm
  • Quiescent current: 5mA
  • Maximum current: 190mA
  • Trigger current: 2-4mA

Songle Single-Channel 24V 30A Relay Module Power Failure Relay High Level

230.10 (Inc. GST)
195.00 (+18% GST Extra)
Specifications:
  1. Nominal Coil Voltage – 24V DC
  2. Coil Activation Voltage – ±18V DC
  3. Coil Drop-Out Voltage – ±2.4V DC
  4. Max Current – 30A
  5. Max Switching Voltage (AC) – 240V
  6. Max Switching Voltage (DC) – 30V
  7. Output Modes – Normally Open / Normally Closed

SPEDIX ES 25A 2-4S BLHELI_S ESC-ORIGINAL

1,239.00 (Inc. GST)
1,050.00 (+18% GST Extra)
Specifications:
  • Continuous Current: 25A
  • Voltage Range: 2-4S LiPo
  • Weight: 5.9g
  • Dimensions: 12.8X25.8X5 mm
  • Firmware: BLHeLi_S

SSR 24V 2 Channel Low Level Module 240V 2A Output with Resistive Fuse – G3MB-202P

277.01 (Inc. GST)
234.75 (+18% GST Extra)

Specifications:

  1. 2 channel 2 AMP Solid State Relay board
  2. Control 2 loads of up to 2 amps each at 120V or 240V AC.
  3. Good for lighting, holiday displays etc.
  4. Trigger Voltage (VDC):24
  5. Operating Current: 16mA
  6. Maximum Load: 2A @ 240VAC