Showing 85–96 of 123 results
L293D Motor Driver Module 4.5-25V
₹119.01 (Inc. GST)₹100.85 (+18% GST Extra)
Specifications:
- Driver Model: L293D
- Operating Voltage (VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
- Polarity Protection: NO
- Cooling Fan: NO
- Arduino Sheild: No- can be used with a Wire connection
- Dimensions in mm (LxWxH): 40 x 30 x 14
- Weight (gm): 15
L293D Motor Driver/Servo Shield for Arduino
₹128.62 (Inc. GST)₹109.00 (+18% GST Extra)
Specifications:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
₹199.00 (Inc. GST)₹168.64 (+18% GST Extra)
Specifications:
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
L298N Motor Driver Module
₹143.01 (Inc. GST)₹121.19 (+18% GST Extra)
Specifications:
- Logical voltage:Â 5V
- Drive voltage: 5V-35V
- Logical current:Â 0-36mA
- Drive current: 2A (max. single bridge)
- Max power:Â 25W
- Dimensions:Â 44 x 44 x 28 (LxWxH)mm
- Weight:Â 26 gm
L9110 L9110S DC Stepper Motor Driver Board HBridge
₹92.04 (Inc. GST)₹78.00 (+18% GST Extra)
Specifications:
- Â Power supply voltage: DC2.5-12V
- Â Each channel has 800mA continuous current output
- Â Low saturation pressure drop
- Â TTL/CMOS output level compatible can be connected directly to the CPU
- Â Control and drive integrated into IC
- Â Have pin high-pressure protection function
L9110S DC Stepper Motor Driver Board
₹90.86 (Inc. GST)₹77.00 (+18% GST Extra)
Features:
- L9110S-chip motor drive
- Supply voltage: 2.5-12V
- The maximum operating current of 0.8A
- Drive two DC motors or a 4-wire 2-phase stepping motor.
- Ultra-small size, suitable for assembly
MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver
₹368.99 (Inc. GST)₹312.71 (+18% GST Extra)
Specifications:
- Input Power: Through PC USB port or 12-24V power supply
- Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
- Driver type: Pulse and Direction signal control
- Weight (gm): 78
- Dimensions (mm) LxWxH: 90 x 70 x 20
- Cable Length: 1.4 meter
Maytech Upgrade MTSP F60100 100A V6 Based VESC Speed Controller with Heat Fin for Foil Assist Esk8 Robots
₹13,570.00 (Inc. GST)₹11,500.00 (+18% GST Extra)
Specification:
- Model No- MTSP F60100 VESC Controlled
- Count Current- 1000A
- Input Voltage- 3-12S Li-po (12.6V-50V)
- Burst Current- 240A
- Hardware- VESC6.0
- Software- VESCTOOL Compatible
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
₹94.40 (Inc. GST)₹80.00 (+18% GST Extra)
Specification:
- Input Supply voltage (V): 4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz): 5
- No. of motors controlled by driver: 2
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
₹2,098.99 (Inc. GST)₹1,778.81 (+18% GST Extra)
Specification:
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
Motor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
₹460.20 (Inc. GST)₹390.00 (+18% GST Extra)
Specifications:
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1
MX1508 Dual H Bridge DC PWM Stepper Motor Driver
₹45.00 (Inc. GST)₹38.14 (+18% GST Extra)
Specifications:
- The module supply voltage: 2V-10V.
- Signal input voltage: 1.8-7V.
- Single Opera:ting current: 1.5A
- Peak current: up to 2.5A
- The mounting hole diameter: 2mm