Showing 25–36 of 123 results

Motor Drivers

5000W AC 220V High-Power Electronic Regulator SCR Voltage Regulator Module

417.01 (Inc. GST)
353.39 (+18% GST Extra)
Specification:
  • Max power: 5000W (Resistive instantaneous load ultimate power.)
  • Adjust the voltage: AC 0-220V (from high to low can go to 0, from low to high is about 20V)
  • Efficiency: 90% or more
  • Working voltage: AC 220V
  • Dimensions: Length 85*Width 70* Height 40mm, without protruding knobs and connectors

5A PWM Speed Control Forward Reverse 5V 12V 24V DC Motor Driver Servo Motor Drive Board H Bridge Motor Driver Module

1,475.00 (Inc. GST)
1,250.00 (+18% GST Extra)

Specifications:

  • Product model: YYH-LWZ
  • Input voltage: DC DC5V~27V
  • Rated output current: 5A, can maintain continuous current within 5A
  • Static standby current: only about 3MA
  • Signal type: The control signal uses the sink current drive method, which supports the direct drive of most single-chip microcomputers, the optocoupler is completely isolated, and the PWM signal frequency supports within 20KHZ
  • Use fast recovery diodes to prevent excessive anti-induced electromotive force from burning out the control part when the motor starts

60A High Power MOS Dual Channel H-bridge DC Motor Driver Module

4,543.00 (Inc. GST)
3,850.00 (+18% GST Extra)
Features:
  1. Use SMT, high integration, superior layout design, very beautiful, small size, built-in 2 channel high power DC motor drive, drive module size only 70mm * 56 mm.
  2. Wide heat sink in the large current may be effective for drive module heat, keep good stable Performance.
  3. The module maximum rated current 60A, and the on resistance only 0.003 ohms.
  4. Switch frequency is high, the most accessible 60KHZ, so effective to debug motor.
  5. Control interface is very simple: A1, A2 = 0.0 for brake; A1, A2 = 1.0 for forward; A1, A2 = 0.1 for Reverse.PA for PWM wave input (motor speed regulation); G for common Ground (B channel for the same control).
  6. All MCU of 3.3 V and 5 V are can control this module, and only need one channel motor power supply (12 V ~ 48V).

7.4-11.1V 320A Brushed Motor Speed Controller Esc For RC Car Boat Model TOY

1,298.00 (Inc. GST)
1,100.00 (+18% GST Extra)
Specification:
  • Working Voltage: 7.4-11.1V
  • Continuous Output Current: 320A (Forward)
  • Input Battery Types: NiCd/ Nimh/ Li-po battery
  • Recommend Model: Ship / Car
  • Reversion Function
  • Low-Voltage, Cut Electricity Protection Function

7V-12V DC Brushless Driver Board Controller For Hard Drive Motor 3/4 Wire

998.28 (Inc. GST)
846.00 (+18% GST Extra)
Specification : 
  • Driver voltage: DC7-12V
  • Working voltage: ≤1.2A
  • Speed adjust:0%-100%
  • Color: Green and Black

9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V

599.01 (Inc. GST)
507.63 (+18% GST Extra)
Specifications:
  1. Maximum Output Power: 2000W
  2. Maximum Output Current: 40A
  3. Power Supply: 9-50VDC
  4. High Quality ABS Case

A3967 Stepper Motor Driver For Arduino

306.80 (Inc. GST)
260.00 (+18% GST Extra)

Specifications:

  1. Power supply: 7V to 30V.
  2. The higher the voltage, the higher the torque at high speeds.
  3. Adjustable current control from 150mA/phase to 750mA/phase.
  4. Logic voltage: 5V or 3.3V.
  5. A3967 microstepping driver.

A4988 Stepper Motor Driver- Good Quality

95.58 (Inc. GST)
81.00 (+18% GST Extra)

Specifications:

  1. Supply Voltage : 8-35 VDC.
  2. Current : 1.0A  (no heatsink ).
  3. Current : 2.0A (with heat-sinking).
  4. logic input : 3 – 5.5V .

AC Light lamp dimming LED lamp and motor Dimmer Module, 2 Channel

1,156.40 (Inc. GST)
980.00 (+18% GST Extra)

Features:

  1. High-quality BTA16-600B triac
  2. AC Voltage: 220V/110V; 50/60Hz
  3. Load Current: 2A Normal, 5A peak
  4. Logic: 3.3V/5V

AC Light lamp dimming LED lamp and motor Dimmer Module, 4 Channel

1,711.00 (Inc. GST)
1,450.00 (+18% GST Extra)

Features:

  1. High-quality BTA16-600B triac
  2. AC Voltage: 220V/110V; 50/60Hz
  3. Load Current: 2A Normal, 5A peak
  4. Logic: 3.3V/5V

Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver – 5Pcs

49.01 (Inc. GST)
41.53 (+18% GST Extra)

Specifications:

  • Material: Aluminum
  • Color: white
  • Teeth Number: 5 Teeth
  • Dimensions: 9 x 9 x 5 (L x W x H) mm
  • They have good thermal conductivity.
  • Very lightweight.